I have this Holset HY35 that I'm trying to take apart but the exhaust housing seems to be really stuck on there I tried heating it up but still no luck any tips.

Looking to see if anybody here has a picture or can take a pic of a dsm input shaft I plan on using the dsm first gear a member here has some transmission parts but doesn't know how it looks like and neither do I so if anybody can help I would appreciate it.

Ok so does any body have a picture of the torque sequence for the main caps I couldn't find anything beside the amount of torque to tighten them . Just nothing in the sequential order they go in I downloaded the overhaul pdf in the library but didn't find anything.

At this point what would it take to remove it I have the ecu disconnected but what else is needed to completely remove it .

Looking for a dsm 1st gear some input shaft .

Im I suppose to cut and grind this part off thought I'd ask before I cut and hack away or theses arnt the right ones.

Did these come with there own bracket or just use the original ones can't seem to remember if they did or not.

Looking for any aftermarket valve springs and retainer.Also looking for bolts for engine and suspension parts just random bolts if you have a bucket of bolts that's just taken up space let me know ill buy them.

Having trouble figuring out on were to adjust it the white dot is were the hole used to be. I watched the video plenty of times but its being fast forward so kind of hard to really see the exact location click

Can I use stock top hats on front evo struts or do I have to use the original evo top hats and drill holes?Rears evo struts seem to go in as the holes match up.Heres a evo strut with stock top hatSame strut but with original top hat

Well i have a stock drop in K&N air filter seriously this thing is almost new i probably put like 1500mi tops would like 40 shipped plus PayPal fees or 40 as a gift.

So i've gone to all my auto parts stores and none seem to cary a dedicated grease/wax remover.Closest thing is this are theses fine for prepping?

Looking for a 2g aftermarket intake mainfold would perfer a street version let me know what you guys got.

Any body here ever used these driveshaft center support bearings >>>> click I know must you guys will say OEM or nothing but I checked them out there a company out in Germany which is not bad and there a good price thinkin of giving them a try but still not sure.

Im on rock auto and I'm going to place a big order so I wanna make sure I get every thing they only show the ones from the font are they the same by any chance?

Ok so i tried to get this spindle out I soaked it in wd40 left it sitting there for some time used a torch heated it up hit it on the side still nothing. Other side came right off I'm planning on changing the bearings and seals but I can't seem to get it off I know it's already screwed up so ill...

I already tried using a pry bar but no luck as you can see is there another method that you guys use that i dont know about any help appreciated.

Im in the market for a soda blaster/media Blaster heres the one im looking at right now >> click 40 plus shipping or either click if it works good it wouldnt be bad I just need it to strip the paint of the suspension parts.Let me know if any of you guys got real world experince with one of...

Is this the best place to have a car lifted up on all four jacks thought I ask since this is the first time ever having a car on all four last thing I want is this falling on me since im going to be under there.

Looking for 2G Intake Mainfold and T3 Exhaust Mainfold and 1000cc+ injectors

Ok im going to be painting the all my suspension parts and engine bay so NAPA is selling the paint and all reducer etc for about $100 but its a automotive chemical resistance type of paint so they only have black and gloss black. I want to do like a candy/metalic type of look they said I could...

Ok im buyings parts now and need some opinions looking for the best handling of course not to picky on a harsh ride.Sway Bars Front and RearRM Racing click $339White Line About $380Are the White lines worth the extra 41 dollars or are about the same.Evo 9 Lowering springs...

Ok so I'm redoing all the suspension on my car and I want to spray the chassis with some under coat I went to my local auto part store and these are the options they got now the question is which two choose all three of these guys make great products.Anybody here have any experience with...

Can you run stainless steel valves on stock valves guides or do I need to go with bronze guides my head looks in good condition like it was recently rebuilt.

I just checked out this video about modifying the stock 1G lifter Heres the video>>>>>> click giving a demonstration about the two. click he makes a good point but im no expert.Are 1G lifters better than 3G lifters I know 3G lifters stop the annoying ticking but whats better for High...

I'm looking for a BSEK thats good quality and reasonably priced I seen them from $28-199What brand would you guys use?

Ok I bought a 96 Nissan Altima as a fixer upper rebuilt the engine new pistons rings bearing ect.... but my problem is this every time i go into any gear reverse or drive the car stalls out I have to perrty much catch it. Meaning one foot on the break and the other giving it a little bit of gas...

I got stock 6 Bolt Fly Wheel and sand blasted 1G Intake Mainfold and Primed spray painted with Dupli Color high temp simi gloss black bakersfield are if you wanna pick up. will post pics later on todayFlywheel 80 obo1g Intake 50 obowill consider trades let me know what you have.

I have this file cabinet and keep most my tools in there looking to make a lock for it from anything that could be bought from Lowes/Ace/ Home Depot any ideas.

Im working on a KA24DE and im plastic gauging the Mains here is the pic it is a little bit bigger than 0.0015 and a little bit smaller than 0.001. Im I in the correct tolerance just want to be on the safe side not too familiar with these measurements.CRANKSHAFT,MAIN&CONNECTING ROD BEARINGS IN...

Any one here running these wheels I think they'll look perrty good just take the middle bmw cap off and your good plus they can be had cheap on Craiglist. Post some pics if you're running them.

What's the right way to install valve stem seals I seen a few videos on youtube and there using a regular socket and tapping them in I tried this on a motor that I rebuilt and damaged the seals now it burns oil.Is there a specific tool to do this or a better way to do this ?

Got a free set of 6 bolt 4G64 rods just wanted to double check to make sure if these are the same as 4g63 rods before I pay the machine shop to bore them out .

Just wanted to know whats the rev limit for these springs will be using new valves possibly this set click also are titanium retainers nessacery. Setup is going to be a hx35 t3 bep or E16g one of the two .

Just wanted to see if any body here is running this setup.If soWhat do you think of it? Spool time & rev limit before housing starts to choke clearance issues? What kind of power you putting down?

Trying to see if there's any Flat Black GVR-4 s around haven't found any decent pictures I seen a few Evo's and look pretty good but never seen it on a VR-4 if you guys have or know of any post them up.A few pics of Flat Black carsI was thinking these style rims and going...

Like the title says im in the hunt for a good clutch kit.For now the car is going to be a DD and stock for now plan on upgrading to a big 16g then maybe a hx35 in a year or two once I get all supporting mods. Ill be happy with 350whp mostly weekend warrior/DD no launching maybe auto x once...

Ok I tried sticking a hose down the tank but no luck any other way to get it out. Got little overhalf a tank thats been sitting almost a year and not going to break in motor with that gas.

Just took the head off to replace the seals and lap the valves but found this. will I need a valve job? Also can I just replace the valve I have a spare parts motor? Motor was running before I took it out obviously not good but it was running.

Up for sale STD size main bearings ACL aluminum bearings will take 30 shipped or trade.

Want to see if anybody here is running a frozen boost water/air intercooler heres the kit i'm looking at click doesn't seem too high priced. Here's another link this one is on a DSM click so if any body here running any type of water/air intercooler let me know what type of core you used and...

Going to be replacing my oil pump since I'm doing a rebuild nothing wrong with the old one but rather be on the safe side. would theses two be a good option over OEM I know its better but also more expensive . Let me know what you guys think. click click

Looking for some HKS 264 cam let me know what u got

Ok so theses are my chooses Eagle and Manley H Beam both are 22mm wrist pin and Eagles are 315 with price match Manleys are 340 is one better than the other And what would you guys recommend never messed with any aftermarket rods before. click click

What goes into removing the front sub frame I see there like 6 or so bolts that hold it down then there's the steering shaft what else goes into taking off the front sub frame I would like to paint it since the engine is out I still have ABS and 4ws

Looking for any aftermarket rodsmust have 22mm wrist pin .

i'm looking for 6 bolt rods i'm going to run 2g pistons so my question Is this can I use aftermarket 7 bolt rods on a6 Bolt motor since im going to have to buy rods and have them machined I might As well spend a little extra and get some eagle or mahle rods if possible.

I just bought this today for cheap but I don't know how to use the intake cleaner and yes I read the instructions but nothing Helpful if anybody here has used this I would appreciate the advise.

So I got a free set of stock Evo suspension meet a guy at the Buttonwillow Race way and he happens to have a low mileage set in his garage that is taking up space the only thing I got to do is pick it up what kind of springs can I go with to get the most of theses mostly weekend car/ sprinted...

Looking for 6bolt rods PM me or text at 661 800 1193 let me know what you want for them thanks