Hello Gvr4.orgIt's been a long time since I've posted here. Back in 2012, I bought 995/1000 and did what I thought at the time was a ton of work. You can see the old thread here First Time Build: 995/1000 It was really the first car I ever built, and it was in a friends pole barn with...

Hello gvr4.orgI know it's a little late posting, but I am wonder if the vr4's will make a showing this year! I'll be there, been super busy with work so I haven't had a chance to make this thread earlier, but 995 will be making a showing.Like last year, if anyone wants to meet up at my...

Hello Gvr4.orgI did a very stupid thing the past weekend, I was swapping in a auto LSD rear diff and performing a 4 bolt swap at the same time. When I went to install the CV axle into the diff, I must have went a little crooked (still not sure how this happened) but I bent the cir-clip that...

Hello AllI am putting a vr4 together, and need to make a spacer for the driver side CV shaft to mount to the motor. The car does not have the AC bracket, and the only one I own is in my car.I was wondering if anyone could quickly measure the thickness of this mount where the CV shaft...

Hello Gvr4.orgBeing in NJ, I'm taking tomorrow off to cheer on the guys tomorrow at NJMP. Anyone know how they are doing/if they are running? I will look at the one-lap website later, but based on the gvr4.org thread and their rochesterdsm thread, I haven't seen updates about them running...

Hello GVR4.orgI am just about to finish up my 5 lug swap, but have one questions.Does anyone know how the seals are installed on the front hub? When I removed the bearing/seals, I quickly tore them out, and I ordered new ones, but am not sure about to install them. I have a new...

Hello Gvr4.orgLast night I pulled my rack and transmission, and am waiting to track down these power steering lines before I resemble the car to be ready for MOD.These power steering lines have wierd flares on them, and an o-ring with it. I pulled the rack and assumed it was regular...

Hello gvr4.orgI am selling an old bike my dad bought because he thought it was cool, then got the GN and we need for that!It can start with start fluid, and idle fine after that. The kick starter slips a little.click

Hello Gvr4.orgIt's that time of year again for us to show up and be told "uhhh go park behind all the cars, and no you don't have a reserved section"Also time to get another awesome photoshoot with the vr4's along the waterfront.Here are the details,East Coast MOD 2013 Date...

Hello galantvr4.org!This is a long shot, but I figured I'd ask. I am making a spacer to inbetween my 3" DP and evo3 O2 housing, that way I stop hitting the transfercase and eliminate the exhaust leak that it causes.I know I can get a 2g DP that would solve this problem, but I'm trying to...

Hello gvr4.orgIn an attempt to afford some go-fast parts, I will be selling some parts I plan on not using in the future.Trade wise, I am looking fordsmlink v3 lite Swaybars, endlinksHere we go!FIC 650cc NOT FOR SALE Used, unknown miles. I used them for a few days and...

Hello gvr4.orgA friend is starting a hx35/40 build, and suggested using this set up for his FMIC plus IC piping. VRSF FMIC kitAnyone ever use this kit? and thoughts for FMIC size to run a hx35/40 setup.Suggestions/opinions/tips are greatly appreciated!thanks in advance.

Hello Gvr4.orgToday on my way to work, on an on-ramp I was at WOT in 2nd gear, at about 3-4k the car instantly started misfiring, and has not stopped since. It seems very subtle, and even idles at the right RPM with no idle hunt. Of course, the car is under-powered, but I'm scratching my...

Hello Gvr4.orgA friend of mine is picking up a sweet white g-ride this weekend, and is investigating running a Holset HX-35 set up. I got curious and did a little background on this type of build to find some expected results, and found that lots of people use them. Problem is, I can't...

I see so many people have these fancy AFPR, but I was wondering if anyone sets them higher than 37-38psi at atmposhere? I have a e3 16g with a keydriver stg3 chip and 560's runinng 18-20 psi. Im at stock levels and don't like how high my AFR's are. I gave my exhaust to a local shop to tidy...

You put some bad thoughts into my head curtis.....First on the VGT discussion page, you mentioned this, and I was able to justify it's too crazy, but only for a while. Once I finished my 16g powered g-ride, I began searching for a new project(still am), but it has to be something odd and...

Hello gvr4.orgDriving around work I noticed that I have a mini "rpm spike" of about 500 rpm, depending on boost, throttle position, and gear.For instance, if I am in the 4-5.5k rpm range, in second gear, at about a litte less than half throttle, at 10 psi, and try to shift, I get a spike...

Hello gvr4.orgThe build/car I have came with a keydriver stage 3 chip, for 560cc inj and a cyclone function. I have spent the few weeks tidying up the vr4 after putting her back together. I am at 2000 miles and am ready to increase the boost.My set up isEvo 3 16g evo 8 IC 3g MAF Cyclone...

Hello gvr4.orgLast night the oddest problem occured, when I got home I pulled in the driveway and gently downshifted into second. All was great. When I went to turn around the car, reverse worked great. Then I attempted to move forward and the car binded up. 1st and 2nd it is really...

Hello gvr4.orgI have brake fluid on my driver side floor mat, and my clutch fluid is black. The clutch line and fluid is less than 1k, so I suspect the master cylinder is bad.I have no issue investing into a new master cylinder and slave, but any suggestions where to get quality parts...

Hello GVR4.orgI have the single bulb clear JDM corners on 995. Where can I go to purchase the replacement bulbs? Walk into autozone and just compare bulbs? Or since it's galant/jdm part, is there a special place to find them?Checked advance auto parts but had no luck, (they also had a...

Hello gvr4.orgI can't seem to rev past 6k, under load or just dragging out the gear. This happened before I took the car apart, and is happening now.I have a keydriver stage 3 chip, but will post the specs of the CHIP once I found the paper work for it, and confirm it is in the car.My...

Hello gvr4.orgBefore I took my car apart, my wipers didn't work. I put my car together, and they didn't work.Then randomly they worked but after a few minutes slowed down and stopped moving, in the upright position. They do not move at all anymore. I have a parts car, with a complete wiper...

Hello gvr4.orgI have upgraded to a E3 16g, and when I went to install my 2.5" DP, the flange did not fit. This forced my hand to use the full 3" exhaust I have. Unfortunately, while it bolts up it's stupid loud. With a e3 16g pushed, from 18 to 22psi, am I going to see a major advantage...

I made a mistake, and am paying for it now.Anyone got one? Let me know a price shipped to 08096 NJ.thanks!

Hello Gvr4.orgThis is my first build, and I am truly learning a ton as I go. Unfortunately, it was 4am as I was pushing to get the motor into the car, and ran into a bit of a problem.I mounted the power steering pulley on the wrong side of the water pump (never assume) and when I put the...

Lets start getting some hype for this event! As of right now according to mitsubishicars.com it isWhen: October 13, 2012 9:00am - 1:00pm Where: 401 N. Delaware Avenue Camden, NJ 08102Hoping to meet some cool people out there! If anyone wants to meet up and roll up VR4 style let me know, I'm...

Long shot but i thought, why not try?Im looking for a stock boost control soleniod for a 05 wrx. Let me know if you got anything.

Hello gvr4.orgThis is for a lady friend who ran into quite the large pot hole. I need 3 rims (so I'm looking for a set of 4).Here's the info, I'm looking for OEM 16" wheels.Lugs: 5 Bolt Pattern: 100mm Size: 16x6 offset: 39mmIf anyone knows of a great after market place for wheels...

Hello gvr4.orgI'm located in south NJ, 08096. If anyone has a GM 87 mm Throttle Body DBW (I believe Hitachi Manufactured these) let me know a shipped price to my zip code.thanks in advance!

Hello gvr4.orgI purchased 995/1000 for $3000 in late December, and picked a larger intercooler, DNP exhaust manifold and FP3065 for an extra $500…didn’t need the parts but how could I say no to that price?When I bought the car, I picked it up with a slight brake issue. The slight brake...

Hello gvr4.orgFor the first time I am re-installing a front case after I complete the balance shaft elimnation. Which is recommended to use for the oil pump, front case, and OFH gaskets?I have a complete gasket kit for a 6 bolt from topline that will have these gaskets, but being so...

Hello gvr4I am in the middle of my first build, and learning a lot. I have two questions that I need some input with1. what turbo should I use?2. should I replace the head gasket? I already have new ARP hardware.My build/Mods560cc Injectors* Keydriver Stage 3 Chip* ACT 2600 ACT...

Hello gvr4.orgI have a cyclone intake I will be using, but I am short a few parts. I found the gaskets and vacuum canister, I just need to know the bolts I need for the manifold.I have two studs on two of the three pieces (can't remember which) and will be posting a picture of what I...

Hello Gvr4.orgI am a newb in the middle of my first build. So as expected, here are the first two newb questions I have, probably to be followed by many more.1. Do people keep the P.S. Oil Cooler line? This car will not have 4WS, so is the cooler still needed? Trying to fit a FMIC and...

Looking for a Mhi 16g. Let me know what you got.Thanks!

Hello Gvr4.orgIn a recent discussion with a friend, he questioned my intention of installing an EGT and Wideband A/F on my car. It is a mild build, with a 14b and tuning to push it with a cyclone.My question is, do you think he is right? His claim was that with a Wideband, you know if...

Hello Gvr4.orgHow did you learn how to tune? Was it hanging around a shop? Using google for many hours?I am going the route of acquiring books on the subject and related subjects to gain some insight and start doing it on my own (hopefully). I am not part of the lucky who grew up around...

Hello fellow gvr4.org membersAt work, during this incredibly slow week, I was wondering, how much HP can a motor handle safely? And when is it truly the time to build a motor with forged everything?A quick google search has dsmtuners claiming upwards 450hp, but does anyone here achieve that...

On Craiglist found a car that has a JDM engine. Is this anything special? Its not the "RS" package ( I believe that is the reference with the 16g and 510's) since it has a chipped ecu to run 560 injectors.Just wondering if this is any harder to support in the US?Also is this engine a...

Figured with the day coming up I'd ask the question, anyone know of any places (perferably online) with sales happeneing? I'll start the list.ExtremePSI is having online sales starting at midnight, you can head to the website now and see what items will be on sale.Anyone else know of...

So black friday is coming, and ExtremePSI is having midnight online sales.I need a new clutch, so it's time to upgrade but don't want to go over board on the clutch. I will be running an EVO3 16g (MHI) and 680cc injectors. Along with all the proper mods, I want to buy an ACT 2100. Is...

Hello fellow gvr4.org membersI am very in-expierenced with buying parts online. I wanted to get a few opinions on whether people buy stuff on ebay, like used turbos. I have been looking for a specific turbo, and many suggestions have pointed to looking on ebay. Not that I don't trust the...

Anyone got one willing to part? Looking for turbo with controller.thanks!

If this is your question, this video is just what you are looking for!didn't know where to post this video, but it's something worth watching in my opinion...late in the video there is a lot of interesting 3D modeling and cut away views of various parts of the turbo. It's very long either...

To clarify my question, anyone know of a good way to get piping other than just buying an ebay or name brand kit? Do People find it cheaper to have it custom made? Or is there a popular DIY way? Saw on mcmaster it was 70 for a six foot section that was 2.5 inches I.D. Anyone ever try a route...

Really hate to do this...but I have no choice.Agreed to buy cyclone intake manifold. Sent funds August 5th. Asked him MANY times for a tracking number, but kept getting the run around.A few weeks later, after being told a few times he was about to ship it, was informed HIS FRIEND was...

Looking to maybe buy one...anyone hear things about it? seems too cheap for the exhaust manifold but i'm REALLY new to this game...found one at clickthis gonna just crack in a year?thanks in advance!

I was a junk yard not too long ago....and found a regular 93 galant. anyone know if those bumpers will bolt on? kinda far and don't feel like making the drive just to be let down....any help would be greatly appreciated!thanks!

Hello gvr4I bought a vr4 that was supposedly heading to be a dragster vr4....so I am looking for anyone selling stock springs.thanks let me know, please PM!