Back after a loooong layoff. Happened on a gvr4 sale listing near a job I'm working on. Made the mistake of buying her badge and looking inside her and kinda got a bit of the bug back. I know this badge was taken off the car just before it was stripped and scrapped, would like to buy that badge...

Hi guys! Looking for a vr4 trunk badge off a 91. Let me know what you've got. Thanks in advance!

Looking to complete my valve cover collection. Need a Mitsubishi cover with the diamonds on it and a Hyundai valve cover, one that says Hyundai on it. Can be cracked or damaged, just going on my wall. Let me know what you've got.

1997 Mitsubishi Eclipse Spyder All-Wheel Drive Rare and fast! Never made by Mitsubishi! Rebuilt and converted to all-wheel drive using factory OEM parts. Have a small mountain of pictures detailing the entire build, dyno run and receipts for parts purchased for the build. Low miles on completely...

Have parts left over from my 2g eclipses, Evo, and my galant vr4's. All prices are picked up. Shipping and paypal fees NOT included. Not looking for trades. Pm me for shipping quotes.This link will get you into the photostream for the pictures. May have to scroll thru to find the ones of the...

This is a feeler for now because have had some interest locally on these but not waiting around. First to pay, gets the seats. There is nothing wrong at all with these buckets. assenger side may never had been sat on, drivers doesn't have any bolster wear. The cmera flash made the blue look...

Found a few parts left on the storage locker. **Prices do NOT include shipping** Shipping possible except for the hood!1) Stock '93 light silver hood. A few small dents and very minor surface under the front lip. Rust easily cleaned up. Pick up only!!2) JDM Switchable Transfer case. 22...

Looking for one as complete as possible. Let me know what you've got!

1996 Mitsubishi Eclipse Spyder All-Wheel Drive*Motor -rebuilt 6-bolt block, bored .20 over, King bearings and rings -1990 Dsm big rods, 2g turbo pistons -polished 6-bolt crank -ARP rod studs and head bolts -rebuilt 2g head, decked(minimum amount to be flat), new valve stem seals, cam shaft...

****UPDATE**** Any parts not asked about for shipping quotes will go in the trash tonight after 5:00 pm. If you are interested any anything, ask now or its gone tonight!!-The time has come to get rid of the parts! Now, if you have contacted me about parts, those parts are not included in...

Have complete cyclone intake manifold. Was installed on my friends 1g talon and everything worked perfectly. Intake was recently repainted, working coil pack and power transister, comes with everything pictured. Plug and play harness has rpm selector for setting what rpm you want the butterflies...

1g Magnus manifold, does NOT have the velocity stacks in it. Good condition, slightly scuffed in some areas, have helicoil in throttle cable hole (check 3rd picture). Comes with plastic intake gasket. Don't need to sell this. If i can't get my asking price, I'll hang it on my wall to look...

Complete long block. Stock bottom end with 130,000 miles. Still has balance shafts installed in it. Rebuilt head with about 500 miles on rebuild. Reground valves, new valve seals, 3g lifters, new cam shaft seals, new arp headstuds, mitsu mls headgasket, new valve cover gasket, new intake...

Have a set of jdm clear corners with bulbs. One of the lights has the tabs broken off but stayed on the car just fine. $50.00 shipped

Have a hyundai valve cover, no cracks, paint peeling in the spark plug valley. $35.00 shipped

Had these installed in 555/2000. When i found them, i posted a thread about them in the general topics on here(search vr-x to see the thread). Sold all my galants and now these are for sale. vr-x in embossed on both seats. These are not easy to find! Very small scuffs in a few spots and the...

Have three greddy 60mm gauges for sale. Just have the gauges and the probe for the exahust temp gauge, no other wiring or control modules for the. Should still be able to get the wires and control stuff from greddy. Asking $12.00 each shipped . ALL SOLD!!!!

Have an ecu that was rebuilt by Steve P. Was in one of my vr4's. Has a switch on the cover that allows you to switch it, to run it as a 90 ecu or as a 91-94 ecu. works perfectly, was tested in both a vr4 and a 90 talon tsi. Had a tmo stage 3 chip when i got it, 450cc injectors, 1g/gvr4 maf...

Have the datalink cable, charging cradle for a palm m100, and the datalink to logger cord. asking $40.00 shipped for everything.

Have a set of hks 272 cams, not regrinds. Have about 2k miles on them. No issues at all with them. Pulled from a running motor, dont need them anymore. $375.00 shipped SOLD!!!!

Have a vr4 shell for sale. Mostly complete except for motor and ecu and a few other things. Comes with all vr4 motor mounts, vr4 transmission, t-case, driveshaft, rear end, complete wiring harnesses, stainless steel clutch line, stainless steel brake lines, dsm shifter, bse 17" rims(needs new...

When I try to reply to a private message it says "we cannot proceed, please use back button to return to the previous page". This a new problem?

Have one of the last Steve P repaired eprom ecu's. Has a '93 auto dsm chip in it but is socketed so change with whichever chip you want. Comes with repair sheet that tells you what all Steve replaced and fixed. $185 shipped and paypal'd. paypal address is [email protected]. - Sold...

Have multipal sets of headliner trim, first is a dark brown, hardly noticable, the rest are the factory vr4 color. Prices are as follows: $30.00 shipped for each piece, $55.00 shipped and paypal'd for a pair. First to pay, gets the parts. Make SURE you let me know which piece or set your are...

Used, has bent fins and damage to the lower portion, was visible when it was mounted on my vr4. One end was cut short, the other has the coupler stuck on it and has not been cut. Tested, holds 30 psi. $50 shipped and paypal'd. paypal address is [email protected]

Used real tial bov. Has wear in a few spots, works pefectly. Comes with clamp but no flange. $100 shipped and paypal'd. Paypal address is [email protected]. - Sold!

Brand new, never been out of the plastic package, eagle h-beam rods with arp rods studs. Comes with arp lube. $205 shipped and paypal'd. paypal address is [email protected]. Sold

brand new, never used, just dusty from sitting. $85 shipped and paypal'd - Sold

Never used, they also can be used on an evo. $110 shipped and paypal'd. paypal address is [email protected] - sold!!!

Have a decent complete set of '89 tail lights. Passenger side light has a very small crack in it. tried to take a picture of it but hard to see. just want to make sure all flaws are noted. $55.00 shipped and paypal'd. Paypal address is [email protected] - Sold

Found more stuff while cleaning my basement. shipping included in prices. Add 3% if paying with paypal or send as gift! thanksenergy suspension kit #1 - missing 5.3108g : $70 shipped - SOLDEnergy suspension kit #2, mostly complete : $100 shipped - Sold...

The last of my fleet. Picked up 1945/2000 from a member on here that was going to crush it. Got all the body parts and started to put it back together but have picked up an evo and decided to sell all the galants and focus on the evo. Its has small dents on the body, a dent above the rear...

Have sold off most of my galant collection and purchased an evo so these parts are no longer needed. Can take more pictures of specific parts if more are needed. prices DO NOT include shipping or paypal fee's. Not going to hold parts. If paying with paypal, add 3% for fee's or send as a gift...

Am looking to hook you my cyclone intake manifold. My buddy used it on his talon and had the butterfly's activated by the fuel pressure solenoid on his talon. Now I have gotten to out of his talon and want to put it on 555/2k, I can't find the fuel pressure selenoid on the galant. I found it...

Am looking for pictures that how what the stock jdm coil pack mount looks like so I can make one for the cyclone I am installing. I do have a mount for putting it on the strut tower but would like to make one that uses stock mounts holes. Thanks in advance!

Looking for one of these timing belts and a balance shaft belt as well. Let me know what you've got. I know that was a greddy extreme belt in the for sale section but can't find it now. Thanks!

Good guy. Good parts and communication. Very honest.

So just received a jdm rs intercooler from a board member (Thanks gmp!) and it has bent fins. Have tried to straighten some sections and have ended up with some of the bent sections pulling off. Am using a jewelers screwdriver and needle-nose plyers and am trying to be as careful as possible but...

The problems are in 713/1000. First the cooling issue. After starting, the check engine light comes on after 3-5 minutes. Hooked up a Snap-On logger and the coolant temp was reading 252 degree and climbed quickly to 316 degrees which i think is the limit of the coolant temp sensor. got out the...

The question is in regards to the build date of a 1995 Eagle Talon. Yes i know that this is the galant forum but figured there's enough guys on here with Mitsu knowledge that i might find an answer on here. the car is a '95 but the build date is Aug of 1994. Am wondering if this was one of the...

For those of you keeping track at home, this is #4 in my stable of vr4's. i also have 555/2000, 1049/2000, and 1945/2000. This is my final vr4! Many thanks to Polskivr4 for the great deal and the help loading the shell. Will post pics later when their loaded in the computer. Just dropped motor...

was just given a '95 galant with the sohc 2.4 in it. can this block/crank be used to build stroker kit? thanks for any info!!

Earlier this year, i picked up the shell of 1945/2000 from ripemloose. body was stripped but has very little rust and the price was right (free) so i got it. ripemloose had taken off the dash badge before i picked up the car and he told me he was keeping the title and the badge for sentimental...

Found a nice hyundai valve cover in the junkyard today. when i was taking it off, realized it has studs and nuts instead of bolts that hold it to the head. was wondering if anyone who has one of these uses longer bolts to secure it or do you get the studs of the donor car and install them on the...

Was at the junkyard and found a set of diamante leather seats that have VR-X embrossed in the leather. after getting them for a good deal (because the yard owner didn't think i could get them out), I test fit them into 1049/2000 and the rails fit perfectly in the front(rears don't and need to be...

This guy is awesome to deal with. Great prices, very helpful. Will definitly be doing business with him again!!