6 bolt crank un cut, needs polish but within specs. $120 shipped 90 amp galant alternator $60 shipped Stock vr4 turbo to maf intake pipe $40 shipped Stock vr4 accordion shifter boot $25 shipped 1g coil Packs $80 shipped 90 dsm throttle body $50 shipped Galant power steering pump $50...

Looking for a 1g dsm engine wire harness for my 280z build.

So while im doing my 4 bolt swap i swapped in the dsm rack. I was going to de power it but stil l wanted power steering. So ive been researxhing about EHPS pumps. I found a 2004 mr2 pump for $ 200 and hopefully try and get it put on soon. Just wondering if anyone else has done this yet?

looking for some 93 headlights

Just wondering has anyone tried to fit bmw e36 headlights into our cars? I remember back in the day when I had a 3rd gen maxima the e36 headlights were the exact same dimensions. Just looking to get something like the 93 headlights but cant find any.

Okay so lately my car developed a misfire while cruising with very light throttle, most noticeable at lower speeds and not in boost or over 30% throttle. it will just it for a split second then stop Air fuels are around 14.7 while it misses. Ive Ohmed out my wires and plugs are new. I checked...

Im looking for exducer and inducer specs for a bep .55ar hx40 turbine housing. I replaced my bolt on housing with an hx35 t3 .70 and machined out the housing but forgot what size it was. Now the turbo needs a rebuild and i want to order the turbine wheel before i take it apart. i dont remeber if...

looking for a drivers side wiper arm for my car.

I have a 4 bolt rear diff i pulled of off a parts car. Still in good condition.Looking to get 150 for it

I'm looking for the I new fender well splash guards that go in front of the tire for both passenger and driver side. I'm also looking for a 89 underdash

Okay so im goin the switch over to t3 on my hx40. I have some parts to get rid of to fund my tubular manifold.Ceramic coated fp race manifold with 4k miles. $150 shipped Punishment racing 38mm o2 recirculated housing. 4k miles $150 shipped BEP bolt on housing for hx40 ceramic coated. 4k...

Looking for a t3 .70ar bullseye housing for an hx40. I can trade my .55 or paypal

Mmcdroid bluetooth logger for android. $40 1g Powersteering pump taken off at 60k $40 12" spal slim fan $35 Spec stage 2 clutch with 3k miles $100 Holset hx40 with 60mm 8 blade and bep .55 housing ceramic coated rebuilt with 3k miles. Barely any play $500

Ive got a Magnus smim for a 1g head. It has been wrapped with dei reflect a gold. It has a small crack along the seam from running 38 psi. Can easily be tig welded. For sale as is or i can re weld it up super strong for 80$ moreFor sale for 180

So i was in vegas this last week. I made the 450 mile journey there and on the way there i passed a semi and noticed it had some surging and the bov fluttered when letting off the gas. Then i made it to vegas and met my friends and did some pulls. Now it was even worse surging so bad the whole...

Okay so i got a mint 4 bolt rear end from pick n pull for 44$. Im having a hard time making up my mind on swaping the rear diff into my 4ws rear housing or just swapping the whole 4 bolt diff into the vr4. Currently my 3 bolt diff is a little noisy but i have absolutely no leaks with the 4ws...

Anyone know of any Camber plates that work with stock struts? I found some nice yoshifab ones but i have not recieved an email back on if the fitment yet. Im running evo bilstein mr struts and hate this positive camber.

Okay so i have two wheels in mind. My current wheels are bent and i want to replace them. I want to get either the two listed below. Im having a hard time deciding. Both are 16x8 and have a +20 offset. I was wondering if anyone knows how well the 20 offset fits. I didnt see it in the kkow...

Who sells the rear door stickers. I remember seeing somone on here who made them but i cant remember who it was and im having a hard time finding them.

Just got done with my 14 hour escapade. I used summit racing 2k urethane primer and a single stage carbon fiber metallic with a clear coat. Total cost was around 400 with a sharpe spray gun. Came out really well. Just need to wet sand and buff.

Looking for any color jdm front bumper. Have money and need one asap.Thanks josh

So i have a few parts for sale. Civic 3 row half radiator with 12" fan. $70 shipped 2g 609 maf with 1g k&n filter $50 shipped evo 6 fmic (easily fits galants) I can even include the piping with 1g bov flange and couplers, to make it complete $80 for the core or $180 for complete kit EVO MHI...

Okay so Im going to do paint and body work this summer on my car. I was thining either a black metallic, a jet black, or a nice silver. My question is what do you guys think will look good.metallic blacksilver black Maybie a blue

Looking for a jdm front bumperLet me know what you have

as title say looking for an engine wire harness for my wire tuck. txt me 661 717 9214 or email [email protected]

looking for a jdm front bumper. pm or email at [email protected]

Pte scm34 dual ball bearing turbo. 63AR mitsu non divided housing 3" in 2" out almost no play, polished compressor, internal gate. Also comes with pte oil restrictor and divided housing gasket. $450 3" high flow cat $30 1G hydraulic tensioner 10k miles $45 16g MHI wastegate $25 Shaved...

I have a pte SC 34 thats water cooled and dsm flanged. It has the non divided o2 housing and an internal gate. The compressor cover is also polished. I bought this from a member on dsmtuners a year ago and put 10k miles on it. It was freshly rebuilt when i got it and has prefect play for a ball...

All prices include shippingWalbro 255 high pressure $40 GVR4 shifter boot $20 Stock GVR4 intake pipe $20 Stock GVR4 upper intercooler hose $20 Timing belt tensioner W/15k miles $40 1G Power Steering pump $40 1g/GVR4 filter K&N style $20 3.5" billet air filter adpater for 2g maf $18...

I have a good condition jdm galant vr4 evolution intake manifold for sale. Ive had it since 1999 but its been sitting around. It was cleaned up and worked perfect with my hobbs switch setup. will include vacuum check valve and solenoid with purchase. I will upload pics tomorrow.Looking for $100

I have a set of used Hotbits DT1 coilovers built to rally specs. Ive had them for almost 2 years now and love them, but i need money for a turbo setup. They are unbelivable offroad and are some of the best coilovers ive ever driven on. Im looking to get $1500 for them or we can make a deal if...

I Have a set of brand new black rear subframe and mustache bushings for sale, ended up sourcing out a 4 bolt rear with good bushings still.Asking 160 shipped. I can get pics tonight

Okay well my i need a CAS pigtail, injector pigtails and a fuse panel cover for the under hood fuses.Let me know what you haveThanks Josh

Anyways i resurrected this from a guy who was going to junk it. I paid 350 for it it was in pieces and needed tons of parts. I totally built this from a junker to a daily driving boosting 25psi with water injection. Here is a list of the mods ive done since i got it. 1992 Mitsubishi Galant vr4...

Well ive been having problems with pushing coolant and thought it was the head gasket. After pulling the head for the first time since i bought the car i found a 3 layer mls blown out into the water jackets on cyl 1,2 and 3. Anyways i found it has some porting on the intake side, and also had...

I have a full ac setup for sale. It includes all hard lines, never used freshly rebuilt ac compressor, and sensors. I have a condenser, but its pretty smashed and you can get them for like 40 these days. Anyways I'm looking to get 140 shipped for everything. I just paid $108 for the ac...

Well i recently switched from a cheap 1 row plastic tank aluminum core radiator that was having problems staying at one temp to a 1G mishimoto radiator. I switched out to the 1g water neck and cap style too. For some reason when my car gets warm it likes to fill the overflow tank up. It almost...

Okay so i got a 1g awd with a blown 4 bolt rear end as a parts car for the 5 lug swap. I was just unsure if i could reuse the 3 bolt rear axles with the rear spindles and hubs from the 4 bolt donor car. I would swap out the 4 bolt but its blown so. Im not worried about keeping the abs since its...

Well last week i purchased 5 two bolt 3" exhaust flanges, and not until today was i notified that they only have 4, well i needed the 5. They told me they only issue store credit, and will not refund my money. Nothing was shipped and they do not have the quantity of flanges i need. After...

Its time to pay off some student loans for uti. Got a JDM rs fmic core for sale, does not leak but has a few bent fins. works great Asking $70

VR4 accordion shifter boot- $25 Real HKS turbo timer- $35 VR4 rebuilt Ac compressor, lines, condenser, and drier $150 2G non ported exhaust manifold- $35 Ported 1G 02 housing- $35 Used 2k mile ARP 6 bolt head studs - $40 Used denso o2 sensor $25 1g BOV- $35 Ported 2g throttle body elbow- $35...

Okay so ive had this thump come from the rear passenger area of the vr4 for a while now. I tried filling the propeller shafts, then bought new oems ones. Then i replaced the U joints and shimmed the drive shaft and eliminated all the vibration at cruising that was there. Now i still have a...

Got some parts from my 1g part out.1G 6 bolt head 2k miles resurfaced, new seals, valve job $175 6 Bolt Crank 2k miles still in specs just mic'd $100 1G turbo water pipe with OEM sealed blockoff plug installed for garret turbo $25 1G intake manifold light port work $30 Shaved Valve cover with...

Okay so i have been running the JDM rs fmic setup on my vr4 for a while now, and i think im at the limits of flow and cooling ability. I found a Evo 3 core for cheap, but not sure if it would be a close fit. It has the 2" endtanks like i want and looks to be somewhat similar except for the hot...

Okay so i decided to get a little video of the car. heres the engine mods2g maf with KNN Evo 3 16g BC 272 cams BS Elim MLS gasket ARP 560cc injectors Evo 9 pump 3" turbo back with cat ported 2g manifold ported 2g o2 housing JDM RS FMIC DSM link V3Dejon toll boost controller set at 13psi for...

Well here is the story. Being a shop owner i like to document all my installs and purchases. I recently purchased a rebuilt trans from biglady112. I paid 550 shipped for it. I was told (by the listing info from the ad and private messages) that it was a stock rebuild with good parts, and was...

Okay so after trying to find my question on the search failed. I got this vr4 and the wiring was pretty shot, i have a battery relocation and now the fuses are just sitting in the bay, i know on my 1g which is the mpi fuse, but i cannot figure out which one is on the vr4 wiring. I just want to...

So its been a while since ive updated on #975, but it basically fully done now. this is what ive done so far.Ported Evo 3 16g, ported 2g manifold, 2g exhaust housing, 560cc evo injectors, 190lph, dsmlink v3, custom hard piping, JDM RS fmic, BC 272 cams, new radiator with 2x Pro form fans...

Okay so i was working on the ac today and found out that the 1g tensioner is a different bolt parttern and will not bolt up. THe car was given to me without any ac parts, so ive pieced everything besides that together now. My question is does anyone have a picture or a link to some pictures of...

Okay so i got this project galant and it came with no radiator, fans, hoses, a bunch of missing stuff. I got a radiator for it and went to the junkyard to grab the coolant sensor and harness but when i got back the harness was bigger, N/A galants are different fan setup? Now my question is does...