Had a deal with redtwo. Nice guy. His parts works perfect. Thanks redtwo.

What is the meaning and difference between 1 way and 2 way LSD?

Looking for a good condition jdm md165808 or md153695.

Sir i just installed an evo3 609, 510cc, evo3 fpr, small 16g and evo4 fuel pump to my jdm 1988 vr4. And I'm still running the stock 8618 ecu. I'm running reach or lean? Do I need to replace my ecu to suit mod? Thanks.

oh my galant!!! happy new year to all!!!!

Planing to install an evo5 ic. Do any of you guys had installed one? Can you post some pictures and how the piping was done. Thank guys and happy new year to all.

Hi.. need help. Looking for an external wastegate diagram to where should i connect the top port and lower port of the wastegate. And also i'll be using a manual boost controller. Thank u i advance.

Good day. Any comments about the act clutch kit mb1-spg6 6pad disc.? Before I buy the product. Thank you.

Need help. 4g63 n/a. New timing belt set correctly. Replace the tps, biss. Clean the throttle and injectors. New fuel filter. Fuel pump and fpr working properly. Timing set at 10 degrees. Still the rpm is up and down and the engine will die. Any suggestions.? thank you.

help... need to adjust my BISS, where is to ground (ISC/j-spec)?

Adjust my base timing to 5 degrees tdc (grounded) with 750 rpm. Engine off Removed the ground, start the engine check the timing with 750 rpm (no ground), timing is 18 degrees (timing should be 8 degrees right?). Help pls...

What do you prefer, a Turbo throttle body or non turbor throttle body and why?

Hi guys, I just need some advice. I gonna run my car this saturday (drag), what is a good boost to run and also timing advance? thank you..

Just finish reading an article and got me confused. Its about octane rating, detonation, controlled the fuel burns, power and mileage etc. What is the required factory petrol octane rating to a jdm and usdm gvr4? And do we need to adjust the rigth timing to compensate what octane rating we use...

Any of you guys have used 215/50 r17? Can you post some pics.. thank you.

Sir need suggestions or pictures. What color of magwheels match a silver gvr4?

I have a stock ecu(5808), im planning to use an evo3 ecu. Do i need to rewire? And also would it benefit me using an evo3 ecu?

What are the difference between a 01420 big 16g to a evo 1 to 3 big 16g?

Need help. When my battery is diconnected and connect it again turn on the key the ac is automatically on, that is normal. But resently i experience a few times, i did not disconnect the battery turn on the ac is automatically on. Any of u guys experience this problem?

Sir good day.. do we really need the rear spoiler on our vr4?

Need help. My brother have a galant gti (4g63 n/a) in the philippines. The engine is swap to a 4g63 turbo (rvr). The ecu of the 4g63 turbo(rvr) engine is a md312467 and not working properly. I have a spair ecu (md334789 also came form a 4g63 turbo rvr), Is it possible to plug in the...

Im using a big 16g jdm gvr4 and planning to upgrade to a big 16g evo3. What are the difference between the big 16g gvr4, evo1, evo2 and evo3 turbo? Is there a big difference in low and high power between those turbos?

Sir good day, just want to know., Where is the best place to tap or get the supply of the vacuum for the wastegate?

Hi i upgrade my gvr4 jdm 88 model. 16g turbo, 609 maf, evo4 fuel pump, 510cc injectors and evo3 fpr. In idle Check engine indicator is on, when i rev it the indicator turn off. Any suggestions?

Does an NA and turbo 4g63 stock fuel pres reg have the same psi?

Need help.. at first try the engine wont start, 2nd attempt it will start with normal ideal (cold strat working perfectly). After 2 or 3 second the engine dies. 3rd attempt it start normaly and wont die. Put it on 1st gear and gradualy accelerate the engine choke first and rpm will raise. Even...

Newbie question: ex. 205/60 R15. What does R stands for?

i had change my gvr4 maf to a 2g maf, i've followed the intruction at vfaq and it work out fine (check engine did not turn on) guess i did the rewire right.. I removed the return of the b.o.v. When i rev it (3000rpm up) and released the accelerator the rpm drops and the engine dies.. did i done...

just want to know what kind of turbo does a galant vr4 rs have.. 16g or a small 16g? thanks for the help...

need help.. my intake manifold is a stock jdm. my friend gave me a stock usdm intake manifold, if i will use the usdm manifold would there be an increase in bhp? thank you for any answers and suggestions

need help. i just install an older model hks bov. it has 2 nipples (large and Small), i connected the hose to the large nipple going to the intake. the small nipple is not connected and i don't have any idea where to connect and what its for . also i did not connect the return hose.the bov...

just want to know where do we get the measurement of the engine if it is a 2.0L, 1.6L etc (piston size)?? where do you get the liter measurement inside the engine?

where is the best place to top a manual boost(turbonetics) controller? wastegate and intake or wastegate and upper i/c piping?

just want to have some idea. What are the difference between JDM and USA gvr4 in terms of intake, i/c, rear deff(LSD), tranny(LSD), turbo, etc. And also HP?

i just want to make sure. I remove the timing belt and went to get lunch, i came back to get the belt for sample to buy a new one but the dog eat the belt and i cannot count how many teeth the belt have coz half of it is missing. how many teeth those it have 153? coz im not sure. thanks

where are some possible location to place or put hyper grounds?

I'm having some difficulties tuning my sfac . I've try relating to RRE sfac tuning, can u give some tips or other link to for additional knowledge to properly tune my sfac. thanks

i read some of u guys set up your cars using the stock pressure plate and combined it with an after market disc (5 pack disc) or the other way around. cause here racing parts are limited. we use "TRD" (TIPID RACING DEVELOPMENT). "TIPID" means not enough mony to spend i know all of u guys have...

i install an evo 3 fuel pump in my gvr4. the evo 3 pump is smaller and i use a clamp to hold the pump. i'm experiencing a static in my stereo. do i have to use a kind of rubber that i will wrap around the pump to prevent it from having direct contact by the clamp that i've use to hold it?

I've change my timing belt and used a brand new belt (old stock), all timing marks are in the correct place. every time I rev it @ 5k rpm the engine vibrates. does the vibration is cause by the old stock timing belt?

guys can you post some pictures of a 3" down pipe or a costume made. i will appreciate it very much. many thanks!

what is the appropreate timimg degree for a stock vr4 engine?