I am repainting my gvr4 and I might replace the external rubbers around, wether strips, the roof terms both sides, sunroof wether rubbers strip. The black center tail light is broken, dash gauge cluster plastic cover is broken. Front and rear windows terms if still clean. What ever external...

As subject

log below. idle + rev log It is being long time since my last post here, I need little help from ECMlink users, Please have a look at my log, I did some adjustments to get reasonable reading. The issue I am suffering is the car cant hold after rev or slow down. Main mod have done to the car...

Looking for new or very good condition used GVR4 alternator or alternative good upgrade with higher amp.Thanks

Need your help.. Please. Any one knows if replacing water pump required timing belt removal? Or I can simply replace the pump without touching the timing belt. Timing belt looks new and I am planing to do it my self. Don't have enough tools for heavy job.Thanks

I need help to setup the SD using ecmlink v3+ ecm SD setup sensors and cable.Attached my setting and a log. I couldn't let it idle right. Mods are big 16g, ecm link SD setup,HKS264's, Tial wastegate, Apexi boost controller, 3" exhaust, AEM Adj. fuel regulator. I have done leak test and let...

As subject above. I am looking for Alternator Relocation Kit

As you most know that engine heats depreciate the harness especially at the thermostat housing side. I thought will be better just to buy a good complete harness instead of fixing it. I bought one from a guy named Josh. Unfortunately the new harness has some missing plugs at thermostat side. Any...

Looking for clean genune greddy type S bov

As titled I need a complete engine harness. It should be in very good cond.

As titled any body have one for sale?

I have read about upgrading rear brakes for 1g & gvr4. Not much options and the e-brake make it harder. Some did convert to 3k gt, Evo brembo, Cobra or 96 corvette. All required brackets & major work. Also mostly telling the 1g rear brakes are good enough. In my case I realized a gab between...

I am to buy new rims. I am looking for 18" rims. But I am confused about the offset as I am using 3000gt VR4 Brakes. The current rims are touching the calipers & had to use wheel spacers & longer nuts. I am not happy with the current setup as wheels are not matching the fenders. Any advice what...

Hello'I am looking for a good greddy bov Type S, RS or RZ

I got idle issue. I am suspecting the IAC. Any one experienced such issue? When I turned on Ac, rev up Or slow down when driving engine dies,[url=http://www.youtube.com/watch?v=mqNZI_adK9A&feature=youtu.be t=_blank]>>>>See how it act

What a good short shifter? there are some on ebay. JZN little expensive. Any idea where to look for a good one?

I am to replace the rear diff bearings. I sow only 3 bearings in the stock diff. while it show 4 bearings at CAPS. Two at the sides & two at the pinion. Rear & front. I find only at the rear of the pinion when I take it off out of the diff. Any one can confirm how many bearings are there?I...

I have seen some where how to convert JDM ecu to DSM to accept the DSM Link. I searched & couldn't find how. Any one know what mod to be done?

I am to take off the rear diff for pinion & ring change and I need some tips before jacking the car. What to do & what to not?

As above looking for Rear diff. JDM 3.909. I find that my tranny is JDM and need toreplace my Rear 3 bolt diff.to JDM one.Thanks

As per Forum from 4GTuners. Good to know. You may need it one day.Body Description Model Class "Vehicle Name Code" PNC Part Name "Mitsubishi Part Number" Part Specification "Front Ring Gear N" "Ring Gear P/N" Dates Note1 "Rear Diff Ratio" "Diff Type" R&P Rear Gear Kit P/N EVO1...

I am to rebuild my VR4 tranny. There are some kit available. but due to shipping cost. I would buy the parts from Mitsubishi dealer instead. Then order only upgrades or performance part through the Internet. Also it will be nice to have the part number listed in here. It will be very helpful if...

As subject. I am looking for a Nice looking exhaust heat shield. My exhaust manifold is 2G one. NY 11413.

Any one know if Evo tranny will fin in a GVR4 & what mod has to be done except the shaft lever (Bracks).

I am facing an issue on my stereo system. As alternator noise appears when I start the stereo. Noise is not from the stereo unit as i pass-by the unit. It seems from the 4 chanel amplifier. Just wondering if any faced similar issue on his Galant. A friend of mine experienced alternator noise at...

I want to let the heat find a way out of the hood. So I cut the hood for 12" & force it down using a bolt to make a hood vent. it takes 60 munites may be. It has to get polished & painted later. I hope it will do the work. The cut is almost over the exhaust after the radiator. here are some...

I played little with paint shop using a photo of some one's car. What do you think? should I keep the original color of my car or pick a new color?

Any one could get out the pin of the lever? Any idea please. I keep hitting the pin but it did not move.

Just thinking how Rear Diffuser will be looks like on USDM rear bumper !!

I need part number of JDM VR4 Rear bumper. Also Front bumper if possible.

click hereJust want to share what I sow. The only note I add is some are spray copper on the head gasket. also you may have 3 nuts hitting the valve springs. So you can use ARP small collar nuts part# 300-8308. Another thing is you can fit ARP studs with out taking off the head if you are...

I just bought VR4 '92 ULTRA RACING 3 PTS FENDER BAR from ebay.What do u think? I think this is good upgrade for handling. I am thinking to make custom X bar down the car also.

After I made my gvr4 stable on the road. Again I got hungry for more power. So I upgrade to big 16g & 2g ported exhaust manifold, External dumper, 3"exhaust + Methanol & Nitrous kit. I am still more hungry for power. So I am thinking of doing 30psi of boost. My engine is almost stock except the...

I found this youtube. Nice info but you should understand japanese first[url=http://www.youtube.com/watch?v=UE4GQfJL4Ck&feature=related t=_blank]>>>>Watch part 1

Hello'Just need little help. I just bought a new engine oil level gauge Part number. MD127058. I am confused. Either the mitsubishi give me the wrong part or I had the wrong part on the car. Any one can confirm how long is the original oil gauge is. The new one I bought is a little longer...

Need help on removing interior AC air vents. I just bought good AC vents & I want to replace my old broken vents. Any experiance on how to remove them from the dash!

Just wondering how to let the radiator fan runs at low speed continuously when ignition ON tel get the emergency signal to go high speed! Also Any body tryed aftermarket radiator fan controler?

Just wondering is there any easier way to adjust the pivot ball at release fork other than taking off the transmission? Actually I am having bad shifting at high RPM. It is grinding until RPM go low. I bleed the clutch & extend the slave rod & got little improvement. I already bought red line...

Hi'Any one tried this click I am thinking to fit them in to stock GVR4 shocks.

Hi' I am facing difficulty on setting my AFC-neo. Just need starting point. I know there are some expert here. My car has stock JDM cyclone engine. I am using 3G MAS & FIC650 injectors & AFPR at 40psi. Cyclone is being activated via turbo actuator at 10 psi. The ECU is JDM 510 injector. I am not...

I am having difficulty to shift between gears especially on the fifth gear. It heapen after I replaced the clutch. I am suspecting the SHIFTER BEARINGS Bushings at the end of shift cables under bonnet. I will buy an upgrade & I am confused what to buy. Any experiance or suggestions please....

Any one experience such problem? How to solve it? The main low fan relay burned once & replaced & still main fan not running at low speed. The front fan fuse being burned 3 times. both fans looks working. And any suggestion for better cooling

Hello'I am having leak from the rear rack at the driver side on my VR4. Is there any repair kit for the rear rack as showen below...If the repair is available' what is the part number? I think I need to replace the seals inside the racks.

click>>> Any one can tell if this is correct? I think this is wrong because he is deactivate at 10PSI of boost. And Cyclone being activated at low boost. Also there is another hose at the top of the actuator. Any one can guess why is this? I have supra.tt turbo actuator on my hand. There is no...

Any one can tell..What the hill is this>>>> My VR4 is loosing power. click RPM is going high while the car is slowly moving!!!Please I need suggestion of a quality & good price upgrade if this is clutch issue.

Hello'I have seen 3 turbo at my friend shop. Any one of these is worth to buy..They are $230 each. (Note: I am not expert with turbo's)here are the photo.

I still need help to have my VR4 run....Reffer to this>>> click I fixed the original MAS back, Replaced the ECU & Test the ISC. But the I still have the same issue. Any suggestion please why the injector made the engine full of fuel?

I ordered from this site click 9 months ago. I did not received the catalogs yet. Not eather my money.