Paypal claim #PP-002-643-325-163 Resolved in my favor.I sold him a set of injectors, and throughout the whole process he was difficult to work with, has poor communication, and tried to rip me off. He sent me a PM about purchasing a set of yellowtop 510cc injectors, and I saw that he was...

As the part out of my drivetrain is dwindling down, I still have the shell. Interior and exterior are still intact, and I haven't pulled any pieces out of it as I want to sell it whole. Comes with most of the underhood components minus Engine, trans, ECU. Has exhaust and fuel pump still in...

This is it. Everything I have left from my Galant. Lets make some deals and get this all gone!Lucas 702-371-4127 [email protected] (mitsubishi OEM, cant remember if it is 7-bolt awd or 6-bolt awd) $15+shipping ECO/PWR Switch w/ pigtail $15 + shipping (Can...

I am trying to sell my VR4 and my boat in hopes to purchase a bigger one by the 4th of July. So here is a copy paste of my ad from another forum. This thing is also babied like my car has been. And I know it is a long shot posting it here.ThanksLucasUp for sale is my 76 Hallett...

I'm looking to sell some parts that I have had sitting around my garage that I was going to hold on to, but it is taking up way too much room and I would like to see it all go. I have a ton of stuff that is not listed yet, so if you need something, just let me know. All prices are a...

So I am about to tear in to my car to get a few wiring things taken care of. First, would it be safe to run an AEM UEGO, lightbulb(for autometer mechanical boost gauge), Greddy Profec-S, and the alpine CD player off of the factory stereo wire? If not, should I run a separate line from the...

So Ive got a civic radiator on my car (Bought it from Garfield, looks like it was an XSPower). The cap leaks coolant. I tried the 0.9bar that came on it, and a plain 1.1 dsm cap. The caps don't seem to have a very tight fit, is there an easy fix for this? Maybe another gasket on it? I just...

So the top clip on my driver's a-pillar is broken, and it likes to just fall a bit on the top when I hit some bumps or anything in my car. I was just gonna drive a screw through it to hold it there, but it would hit the seatbelt track. Does anyone have some suggestions on what I could do to...

So im at the point where I am going to be breaking in my motor. I am going to motoman method the break in process. I have BC 280 cams with a t3/t4 Garrett, wiseco/eagle combo, 2G MAS, 510cc yellowtops, and a '90 non-eprom ECU. I was told that this injector/ecu/MAS setup would work for break...

So I have an FP intake I am installing on my car. The intake, however, seems to slightly squeeze my lower radiator hose against the transmission. Is this normal? Would it affect my cooling system at all? Thanks!

I bought a throttle cable from some jackass on tuners, and he sent me a 1g cruise control unit... smmfhSo, I need a non-cruise 1g cable as soon as possible. Let me know what you have and your price shipped to 89005, thanks!

I have an entire garage full of DSM parts and I would really like to get rid of all of this stuff that I do not need anymore, and get my garage back!! If you need anything that you do not see listed here, just shoot me a text or call and I can see what I have. Everything is best offer, shoot...

So I have a 90 OFH on my car, and I was going to be mounting this B&M cooler with braided steel lines and such, but I cannot find a suitable area to mount it to. I saw Terry Posten's mount where the ABS unit used to be, but this cooler seems a bit too wide to fit in that spot. I was also going...

So I am repairing the previous install of an SAFC on my ECU, and I noticed there is two large brown/wht wires that are taped up in to a bundle or wires that lead directly to the ECU and the grounding point. Is this OEM? It just appears a little funky to me, and I would like to make sure it is...

Okay so I am re-doing the previous owner of my car's battery relocation. Ill lay out what my plan is looking like, and I would appreciate some input on if this is a correct way to do this, and if not what I can do. My goal is to completely delete the fusible link box that was originally...

So I'm reinstalling my electrical harness in my vr4, and I noticed that a 3-prong triangle shaped connector that appears to go to the A/C compressor connection has two wires pulled out of it. The colors of the wires are blk/red, blu/wht, & yel/blk. Can anyone verify that this is for the A/C...

Looking for these two pieces in good condition. Also the tensioner if it if different than a 1g? Pictures would help me on that. Paypal ready to fire. Thank you!

Im about ready to drop my motor in my car, and I hit a bit of a perdicament. The front motor mount bracket hits the compressor housing (downfiring T4) and needs to be cut. Has anyone had to do this? If so, does anyone have any idea of how much metal I will have to remove? Also, I will be...

Im finally getting around to getting this 3bolt lsd rear in my car. I completely removed all 4ws components. Im having trouble getting the rear end lined up against the subframe. Ive tried with and without the driveshaft bolted up, but im still not managing to get it in there. It keeps...

Will this intake fit with an ETS front mount kit? Its already set up for speed density so im not worried about that jazz. Just wondering if one will fit properly before I purchase. Thanks!

Okay I've got a 1990 tsi awd donor car. I took the non-abs brake lines out and they bolted right into the galant, but the ports don't mate up properly to the lines on the proportioning valve that is from a non-abs galant. Should I just use the tsi valve or get the lines bent to the galant...

Im looking for a set of aftermarket pistons. They will be installed on eagle h-beams and they must be oversized (block has not been machined yet, but it will once pistons are ordered.) Send me a pm or call or text me asap please!!Lucas 702-371-4127

I am swapping a '90 transmission and transfer case in to my VR4. Do I need to swap my shifter cables or the mounting brackets in order to make this swap work correctly?Also, are the passenger side front axles the same on the gvr4 and the '90 dsms?Thanks!

As the title reads pm me prices shipped to 89002! thanks!

Im going to be running a Garret with an A/R .70 coldside and .82 hotside with A/C still intact, along with an ETS FMIC kit. Considering the vegas heat (120*F but minimal humidity during summer), does anyone think I would have any problems running a PWR civic half sized radiator with a 12" SPAL...

Let me know how much you want shipped to 89002. Thanks!

So, im going to be picking up a tsi awd to swap the drivetrain in to my vr4. The car has a custom Garrett with a A/R70 cold side and A/R83 hotside. The car has a spacer for the manifold so the turbo can clear the water pipe. What would it take to get that turbo to fit in to a galant, figuring...

This is a 1999 Mitsubishi Eclipse GS-T. The car is completely stock other than a drop-in filter for the intake and exhaust, and a new aluminum radiator. You will not see another factory 2g turbo'd eclipse like this. It only has 36,000 miles on it! (CarFax to prove it). It has a clean title and...

So I was driving along just fine, and out of nowhere I heard a sort of clunk from directly under the motor/tranny. I didn't think too much of it because I thought it could be something from the road. Related or not, I get home after work and go to drive somewhere a bit later, and insied the cab...

My car has an aftermarket pioneer deck, and all 6 speakers are pioneer/lightning audio. I was driving down the freeway the other day, and then suddenly everything cuts out, and all sound was lost from the speakers. The deck still appeared to be functioning perfectly fine. So a couple days...

So I drove the car last night, and everything worked fine. I go to start it today and I noticed everything works, except for the illumination lights behind the dash and gauge cluster. All of the high beam/abs/turn signal, etc. lights work on the gauges, but not the green/orange lights. I...

So I have tried looking, but I haven't come across anything that answers my questions. First, there are a couple connections to my thermostat housing that are a bit messed up, the white connector on the top, with two connections in it, what is it for? The previous owner of my car had just...

I'm going to be installing my AEM UEGO wideband, and I was wondering where people have mounted their o2 sensors? Does anybody have pictures?Also, where did you tap your power wire into, and where is a good spot to run the wiring from the sensor all the way to the gauge in the A-pillar...

If I am going to be replacing my timing belt on my car, what would be the best route to go, the normal gates (t167), the blue gates (t67rb), or the OEM mitsu timing belt?I'm not going to be trying to push the limits or anything on this car, just eventually build it to the 400-450 whp range...

When I picked up my galant, there seems to be a new radiator fan (passenger side), but it is not hooked up. The only wires it has are a blue and a black wire coming from the fan itself. Where is the wiring I would have to splice into to hook it up sorrectly? There are a couple loose wiring...

When I bought my 92 gvr4 the front bumper was off, and now I am trying to reinstall it but there are no bolts with the car to put it back on. Does anybody know what size the bolts needed are relevant to this picture?And there seems to be a bar with at least half a dozen holes on it that...

I'm new to the site and I tried searching with no avail, will the stock evo viii valves aprings and possibly retainers fit into our heads? I picked up 599/1000 the other day with bent intake valves, and I read that evo valves are better build to dissipate heat, am I correct?