I know this is a long shot, but I'm looking for a STOCK Galant VR4 full exhaust system (turbo back) in good condition. Downpipe, cat, piping and muffler ...everything.If you have anything I need and are willing to ship to CA, please let me know your price.Thanks!

I expected that removing the door card would be pretty straightforward, but I was mistaken.I have been defeated and am now asking for help.Here's where I'm stuck...Looking at the picture, I've removed the following: Triangle/Sail panel Two screws on the left side of the panel (upper...

I'm wondering if there is anyone here that has a set of CT9A Ohlins DFV Road & Track coilovers installed on their GVR4.I'm aware of what needs to be done to bolt evo suspension bits onto our cars and that if I wanted to retain the evo camber plates I'd need to drill new holes in my strut...

Today I find myself wanting to repair/replace the O2 sensor connector on the harness side as the wire insulation is brittle and broken near the connector leaving exposed copper.I do have a good condition donor 1G dsm harness that I can pull an O2 sensor pigtail from.My question though - if I...

I say potential because I was in the garage this past Sunday and my wife comes home, walks in and says "I think I just saw another one of these things down the street."I asked where, finished what I was doing, then took 777 out for a spin around the block. Found nothing that looked remotely...

This is a project I started a while back, but just recently finished. The end result looks pretty decent, so I thought I'd share.It started off with me disassembling a spare Innovate DB Gauge (older style without the Innovate logo). I was curious to find out how big/crowded the PC Board was...

Can anyone tell me the exact function(s) of the EGR temperature sensor on a California VR4?I suspect it's only a functionality check, but have been unable to find any info.The reason I ask - I've failed smog, but passed the sniffer test (with a bad EGR valve even)! The sensor in question...

So I'm in the process of moving my battery to the trunk (to free up room for a 2G intake), and I'm looking at the 150A breaker I bought to put in back by the box/battery and I notice that one side is labeled "IN", and the other "OUT".Before I make a mistake, I figured I'd ask, "does it...

Is it a 36mm for both?My manual is at home, I'm at work... that's about as far as I got disassembling an old transmission last night. Thinking about picking up a tool or three during lunch so I can proceed with disassembly when I get home.With three cores in my shed, I figure it's time I...

Anybody have any idea what's going on here? This might be a question for the previous owner(s) of 777/2000. Just curious......it also has a phone cord hanging out of it - tempted to plug in an old phone receiver and ask it some questions.I have no idea what would happen if I started...

Since these are large items, I'm wanting to sell them locally. So, if anyone is in the CA SF Bay area (San Jose specifically), here's what I have for you!ROTA SVN 18"x9" +30 (Royal Bronze) w/Dunlop Direzza Z1 Starspecs (255/35/18)EDIT: everything else sold, just have the wheels left...

Pulling in to the garage last night, I noticed a light clunking/clicking in the front while turning (at a low speed crawl). It felt like it was on the driver side. First thought, maybe an axle, i'll check it out tomorrow.Now today, which just happens to be "tomorrow", i had to take the car...

The galant has survived it's first week of commuting 70 miles a day since I picked it up - and dry too, not so much as a drop of oil on the road from this thing anymore! (was bad before)Anyway, I know I've got plenty more issues to sort out, one of those being gas mileage. I haven't...

This past weekend I replaced the oil seal on the front balance shaft (behind the small sprocket for the balance shaft belt). Upon reinstallation of the spacer that slides on the end of the shaft, into the center of the oil seal, behind the sprocket - I noticed that one side of the spacer/metal...

Took a break from fixing mechanical issues to pretty her up a bit.Spent the day moving my JDM front and rear bumpers from my old GVR4 to 777. JSB x2!Front on (crappy iPhone photo). I thought I had a shot of the rear, but I guess not. But look at the size difference between the...

If I pulled the main 60A fusible link, disconnected the computer in the trunk and unplugged the lawnmower engine, is there any reason I should not drive the car around like that? Brakes will still function as expected (minus abs), correct? Any quirks or weird issues in doing this?I ask...

That's right. Third time is a charm I guess.My third GVR4 and I finally have one with a badge (and the key fob!). I wanted this car the first time I saw it in the for sale section a while back. I couldn't pass it up this time.With the amount of body work my other '91 summit white needs...

Amazing seller!I bought a used exhaust and it came packaged nicer than any new exhaust I've ever ordered. Thing even looks new! I'm still in awe!Thank you!

I figure I've been trolling around this place long enough, it's time to post a few pictures showing the reason I'm here.This story begins almost two years back when I traded a friend a carbon fiber hood off my EVO IX and an Xbox360 for a '91 GVR4 that no one (but me) wanted. Funny thing is...

Just thought I'd throw this out there for those looking for JDM parts.'everspring_sports' used to be the guy on eBay to watch for JDM E39A bumpers, but I haven't seen much from that guy for quite some time. Recently I noticed 'wny1716' selling JDM bumpers on eBay. With little feedback, I was...

So I've just about put my engine bay and interior back together after paiting and repairing my harnesses and I'm left with a couple of connectors that I don't remember what they connect to (if anything), nor did I take pics of them before removing everything.First up, this single pin...

I remember reading a thread where someone mentioned they were able to correct the gap in the rear bench seat.I've searche dand searched, but cannot for the life of me find who said that so I can ask them. So, to anyone that has installed an evo interior (rear bench) and gotten rid of the...

In the attached picture, is the single (circled) blue wire w/black stripe for the coolant temp guage or coolant temp switch?I ask because there's another single wire connector (yellow/green) in that area, and either could plug in both locations.I'm unsure since the harness on my GVR4...

Sections of the Chassis harness on my gvr4 are trashed. For example, all the wires that connect to the alternator are trashed, covered in dirt, oil, grease. Loom was not present in that area, wires were hard, insulation torn in sections, just overall bad.I'd like to replace that section of...

Before I go trying to smash this thing on out of frustration, can anyone tell me the proper way to get this clip on? Is there some tool I can get to spread it? If so, what the heck is it called?

In my quest for cable ties w/body clips for my wiring harnesses, I came across this site that offers miscellaneous Mitsu body clips. Thought I'd share since it was useful for me. clickI found a couple of things I need there, but I'm still searching for these ties...Anyone happen to...

As I'm sure most know, Prothane's front motor mount is no longer the two inserts that compliment the factory mount, but rather a solid piece that needs to be pressed in.Before I pass the point of no return and cut out the metal sleeve, I'm wondering if anyone thinks that I might run into any...

Reinstalling my front subframe - how do make sure it's properly aligned? Is there a trick to this, or does it not really matter (I would think it might). If the subframe bolts didn't wiggle around, I wouldn't need to ask this.All crossmembers were removed as well, so I can't just bolt the...

So, the car is currently torn apart as I have recently repainted the engine bay. Prior to this, there was a faint smell of coolant in the cabin, but the heater core wasn't to the point that it had soaked anything inside the car. Being that it's out of the car at the moment, I will replace it...

...and the reason I'm looking for pics of the front end (front passenger side near tow hook to be exact) is because mine is tweaked. At least it doesn't appear right - car came that way, along with the front driver side tow hook bent like a taco. Nothing else appears tweaked.Anyway, i'm...

...posting this from the garage while taking a break from scrubbing, wiping, scrubbing, and wiping some more - I'm looking for some tips on cleaning nineteen years worth of dirt, oil, and grease out of an engine bay. This is horrible! It seems like I've been doing this forever and I still have...

I feel very noobish asking this, but haven't been able to find my answer by searching.I'm sure you can guess where this is going - 5 lug conversion. What I'm trying to find out is, will the GVR4 calipers bolt directly on to any (90-94) 1G TEL front hub? Are the mounting holes the same for...