The Top Mitsubishi Galant VR-4 Resource
Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.
- Software Upgraded - Reset Your Password to Login
In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.
#1948 a.k.a Stitch Progress thread
- Thread starter4Grim
- Start date
4Grim
Well-known member
Quoting dc_style:
so nice! time to find some center caps /ubbthreads/images/graemlins/grin.gif
Cheapest I found were $21 per center cap...include shipping its at $100. I guess this is the price to play for BBS status. /ubbthreads/images/graemlins/crazy.gif
so nice! time to find some center caps /ubbthreads/images/graemlins/grin.gif
Cheapest I found were $21 per center cap...include shipping its at $100. I guess this is the price to play for BBS status. /ubbthreads/images/graemlins/crazy.gif
4Grim
Well-known member
Wifey, my son and my little baby girl all fell asleep...so this gave me time to work on the GVR4 and finish up its new oil catch setup. Had the welding work done at Kings Performance in Orlando by a guy who is big on DSM's. Looks like I am going to take Stitch there to get a couple things done. Also got a new Hyundai VC wrinkle coated with all new Hyundai specific VC Gasket and spark tube gaskets as they are slightly bigger than the Mitsubishi gaskets as i was having a oil leakage from the VC with the Mitsubishi OEM gasket. I also had my coolant temp adapter welded to the thermostat housing to eliminate a source where coolant can leak.
strokin4dr
Well-known member
Looking good, as always!
RyanInWheeling
Well-known member
What did you paint the vc with?
4Grim
Well-known member
Ryan...I used this stuff. Pretty simple to use and apply. Just make sure the surface is prepped nicely and let it cure and it will hold up. While changing the spark plugs the socket came off my wrench and hit the VC and the paint didn't chip.
VHT Wrinkle Plus coating
I got it from a local Race shop while purchasing some AN fittings, but I believe some Pep boys or Autozones may carry it.
Quick update...still planning on switching from my current MAFT setup to Ecmlink speed density but not willing to spend cash on that to sacrafice my daughters upcoming 1st birthday and baptism, so Ecmlink will have to wait a couple more months. I have a couple things I am doing to the car, but I will reveal that later.
Just really concentrating on getting my 7th gen ready for the upcoming NASA events in March or June.
VHT Wrinkle Plus coating
I got it from a local Race shop while purchasing some AN fittings, but I believe some Pep boys or Autozones may carry it.
Quick update...still planning on switching from my current MAFT setup to Ecmlink speed density but not willing to spend cash on that to sacrafice my daughters upcoming 1st birthday and baptism, so Ecmlink will have to wait a couple more months. I have a couple things I am doing to the car, but I will reveal that later.
Just really concentrating on getting my 7th gen ready for the upcoming NASA events in March or June.
4Grim
Well-known member
Bored at work..so decided to add some "prequel" progress pics. /ubbthreads/images/graemlins/crazy.gif
Taken in 2006 when AMG wing and Evo Enkies were installed
Fidanza 4.3 Clutch kit with flywheel
Taken in 2006 when AMG wing and Evo Enkies were installed
Fidanza 4.3 Clutch kit with flywheel
Last edited:
4Grim
Well-known member
Punishment Racing SS O2 housing
DKS 272's
After installing the cams..switched to a Hyundai VC with all hardware and Hyundai gaskets.
FP manifold and FP Red finally installed
4Grim
Well-known member
Some Before and After pics of sandblasting and coating the manifold and misc brackets under the hood from surface rust.
TRE transmission reinstalled and freshened linkage hardware.
TRE transmission reinstalled and freshened linkage hardware.
Turbo99
Well-known member
Did you ever get around to throwing the 235/40 tires on there? I'm curious to see how that setup fits at that offset!
4Grim
Well-known member
Marking where the GM will sit and where the new Tial bov and flange will be located for welding.
All done
All done
coyotes
Well-known member
Clean and simple.looks nice
4Grim
Well-known member
Well after 7 years JSBing going through a rebuild and upgrades..1948 finally went on public roads so I can finally finish the exhaust after changing a few things up. Car still have a few kinks to work out and a couple more things I want to upgrade but felt damn good driving it again.
GSTwithPSI
Well-known member
Do you have any cooling issues with the half radiator?
4Grim
Well-known member
I have no cooling issues with the half radiator set up so far....its a triple core, so that may make a difference.
Yes..you are right G about the manifold coating not holding up. I used some VHT stuff several years ago to coat the manifold when times where tough and getting it ceramic coated was out of my budget. One of the things I am planning is to get it ceramic coated.
To each their own...but I like my muffler. /ubbthreads/images/graemlins/cool.gif
Yes..you are right G about the manifold coating not holding up. I used some VHT stuff several years ago to coat the manifold when times where tough and getting it ceramic coated was out of my budget. One of the things I am planning is to get it ceramic coated.
To each their own...but I like my muffler. /ubbthreads/images/graemlins/cool.gif
GSX_TC
Well-known member
Loving the Amg wing Kevin. So when you gonna take this to a shootout so we can all see it?
4Grim
Well-known member
Wanted a more unified color scheme in the motorbay so I got the COP plate and intercooler piping painted matte black. Replaced the broken Zanklee clear cam cover with a HKS one and installed a RCI billet fuel rail and finally tucked my throttle cable.
Now the Magnus Black cast intake manifold is calling my name more than ever. /ubbthreads/images/graemlins/crazy.gif
OneMoreVR4
Well-known member
damn thats clean
