Noobsauce
Well-known member
looks sweet! I plan on cutting the front like what you have also. it was hit at the top front by the headlight and i figured i can reposition the radiator and intercooler where i want them now
The Top Mitsubishi Galant VR-4 Resource
Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.
- Software Upgraded - Reset Your Password to Login
In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.
#1900 - 'GOLFBALL' build - 2.4-AUTO-NITROUS.... Street car?
- Thread starterGolfBall
- Start date
mitsuturbo
Well-known member
What's going on with this car now? It's been a while since any updates have been posted.
GolfBall
Well-known member
gots another update... finally found another few days to knock some more stuff out...
been trying to figure out what i wanna do with the shifter and got it figure out...
chopped out a nice CF plate from a piece i made
pulled apart the stock shifter...
measured it out and marked it
chopped and installed.... not perfect but good enough
got the other boost pipe (intercooler to tb) done...
all aftermarket manifolds put all the ports in the same spot. well one of the nice parts about doing it all yourself means i can put the right size port exactly in the spot that i want it...
did a little sandwich stack with my tranny cooler and radiator, then bottom right is my oil cooler mounted to intercooler. So everything should stay nice and cool.
intakes done with all barbs and 5 bar map, fuel rail and inj back in and cleaned up. tb cable sorted...
MAN she's getting close.
-wire up trans
-wire up TB sensors
-radiator hoses
-turbo drain
-swap rear diff for auto diff
-ss rear brake lines
bout it... so a few solid days left and she'd be done ready to rock
been trying to figure out what i wanna do with the shifter and got it figure out...
chopped out a nice CF plate from a piece i made
pulled apart the stock shifter...
measured it out and marked it
chopped and installed.... not perfect but good enough
got the other boost pipe (intercooler to tb) done...
all aftermarket manifolds put all the ports in the same spot. well one of the nice parts about doing it all yourself means i can put the right size port exactly in the spot that i want it...
did a little sandwich stack with my tranny cooler and radiator, then bottom right is my oil cooler mounted to intercooler. So everything should stay nice and cool.
intakes done with all barbs and 5 bar map, fuel rail and inj back in and cleaned up. tb cable sorted...
MAN she's getting close.
-wire up trans
-wire up TB sensors
-radiator hoses
-turbo drain
-swap rear diff for auto diff
-ss rear brake lines
bout it... so a few solid days left and she'd be done ready to rock
GolfBall
Well-known member
new filter set up /ubbthreads/images/graemlins/smile.gif JK
picked up some new wheels...
plasti-diped em for now
Cars so fast it decided to blow itself apart /ubbthreads/images/graemlins/smile.gif
just welded it back up for now but plan on rebuilding that whole piece out of some heavier stainless.
was messing with the boost controller and broke this fitting...
so while the cold side housing was off fixing it i threw some paint at it to make it stand out /ubbthreads/images/graemlins/smile.gif
picked up some new wheels...
plasti-diped em for now
Cars so fast it decided to blow itself apart /ubbthreads/images/graemlins/smile.gif
just welded it back up for now but plan on rebuilding that whole piece out of some heavier stainless.
was messing with the boost controller and broke this fitting...
so while the cold side housing was off fixing it i threw some paint at it to make it stand out /ubbthreads/images/graemlins/smile.gif
GolfBall
Well-known member
SO...
that finally catches the build thread up to present.
CAR been running with the auto swap for a few months fighting small issue's here and there.
Finally got it lined out enough to see how it would do at the track. (i knew it wouldn't launch well)
(stay tuned for video)
but anyways, it only did a 12.5 at 125 because it 2.6 60 foot. Car only foot brakes to about 3k which only builds about a pound of boost. LOL.
SO im gonna but the bottle to IT /ubbthreads/images/graemlins/smile.gif
that finally catches the build thread up to present.
CAR been running with the auto swap for a few months fighting small issue's here and there.
Finally got it lined out enough to see how it would do at the track. (i knew it wouldn't launch well)
(stay tuned for video)
but anyways, it only did a 12.5 at 125 because it 2.6 60 foot. Car only foot brakes to about 3k which only builds about a pound of boost. LOL.
SO im gonna but the bottle to IT /ubbthreads/images/graemlins/smile.gif
GSX_TC
Well-known member
Awesome! Cant wait to see the video.
GolfBall
Well-known member
ApexHunter
Well-known member
Awesome, i've been looking forward to your progress.
GSX_TC
Well-known member
Holy sh*t that thing sounds sick once it gets into full boost! did you reel in that C5 towards the end, i cant tell.
Tre3zy
Well-known member
really needs that bottle to spool it up... but it moves once it gets going...
GolfBall
Well-known member
the old nasty exhaust manifold pipe that blew out at the track
got it all fixed up with some thick SS, even went a little larger pipe to help flow, also recirculated my wastegate while i was in there.
Finally got my new tires, old ones were 24.6, these are 26.1, that should help get my MPH back.
needless to say it fills the fender opening quite adequately
got it all fixed up with some thick SS, even went a little larger pipe to help flow, also recirculated my wastegate while i was in there.
Finally got my new tires, old ones were 24.6, these are 26.1, that should help get my MPH back.
needless to say it fills the fender opening quite adequately
Jesus_Negros
Well-known member
sh*t like this makes me want to build another gvr4
Sick build
Sick build
GSX_TC
Well-known member
Love the new rims!what are those? and I cant wait to hear the new recirculated wastegate on that setup. when are you going back to the track? /ubbthreads/images/graemlins/devil.gif
thecman02
Well-known member
My friend was able to get boost to build when they got an arc2 ignition box. Then you will build so much boost you'll have to install a vacuum pump to help hold it back at the line
GolfBall
Well-known member
went out and did some tunning and got it running solid... then went and raced a 1000whp truck and got a got a solid win..... WHILE blowing a head gasket.
got it apart and man did i blow a gasket and torch the head in the process..
it wasn't that deep (forgot to take a before) this is cleaned out ready for welding.
Welded it back up thoroughly and re-decked it. Got a new expensive billy badass head gasket and did all the black magic tricks to all the stuff using all i have learned from the gurus to re-seal the head. I think its staying down this time.
Got a bunch of goodies im dong this week to be ready for 2k13 so its game time
got it apart and man did i blow a gasket and torch the head in the process..
it wasn't that deep (forgot to take a before) this is cleaned out ready for welding.
Welded it back up thoroughly and re-decked it. Got a new expensive billy badass head gasket and did all the black magic tricks to all the stuff using all i have learned from the gurus to re-seal the head. I think its staying down this time.
Got a bunch of goodies im dong this week to be ready for 2k13 so its game time
Gizmovr4
Well-known member
I like the power combination of this car especially the auto! What class will you be running at the shootout?
GSX_TC
Well-known member
When you say ready for 2k13 are you referring to TX2k13?
Gizmovr4
Well-known member
I thought he ment shootout - but likely ment TX2K13. Still what class do you plan to run in?
GolfBall
Well-known member
Quote:
When you say ready for 2k13 are you referring to TX2k13?
Yes indeed. my car group/club whatever you wanna call them from oklahoma city are bringing a bunch of bad ass cars down there.
Cant wait to put a hurting on some people /ubbthreads/images/graemlins/smile.gif
When you say ready for 2k13 are you referring to TX2k13?
Yes indeed. my car group/club whatever you wanna call them from oklahoma city are bringing a bunch of bad ass cars down there.
Cant wait to put a hurting on some people /ubbthreads/images/graemlins/smile.gif
GSX_TC
Well-known member
OMFG!! /ubbthreads/images/graemlins/jawdrop.gif I can't wait to see ya there, will you be attending the Dyno day? If so we're all meeting at a Kroger where they have E85 Located at 1705 Fry road in Katy TX at 8am Friday march 15th. That's the closest place to fill up with E85 around there. Shoot me a text if you wanna meet us there 713 534 2023 Mike
Similar threads
