hey im looking for an oil dip stick and a drivers side kick panel

looking for a driver side kick panel

im installing a push button start with wires coming from a relay that has 1 red, 1 black, and 2 blue wires coming from it. Im trying to hook it up to my ignition switch which u see in the picture. Can someone tell me which wires go where?

looking to buy a good working ignition switch.

i just installed the alternator relocation kit and everything looks good but when i started the car i heard a rubbing noise, looked and the nut on the pulley is rubbing againt the frame of the car. Is it going to rub itself out or should i grind down the frame?

i just installed an alternator relocation kit and need to extend the wiring. i already have a 4 gauge wire going to the battery to the alternator, but do i still need the two positive white wires? Since im using the 4 gauge from the battery to the alternator can i eliminate the two positive wires?

Im looking for the 14mm bolt that is closest to driverside that bolts the carrier bearing and the AC bracket to the block. Im missing mine because i eliminated the ac when i first got the car and dont know what i did with it and i need it for my alternator relocation bracket. Does anybody know...

Does anyone have a link or something on how to install this alternator relocation kit i got from jay racing?

hey, i have a leak on the steel brake line that goes from the engine to the rear wheel. the leak is right in front of the rear driver side wheel. would it be best to replace the whole line or just cut it and replace the half thats leaking. Just to let u guys know i never done this before so its...

im looking for a good working windshield wiper relay

i got a set of kensington grey door cladding off of a galant gsr. looking to trade for a kensington grey driver side rear door cladding from a vr4.

hi, im looking for the rear door driver side door cladding. mine came off on the expressway. I need one in good shape, preferably in kensington grey color. If not, one in real good shape. THANKS!!!!!

i had to replace my alternator, but before i replaced it i ran 4gauge wire from the alternator to the battery. I put the (piece of sh*t) alternator from autozone in and it wasn't charging my battery. alternator was no good. I only took autozone because of the life time warranty. Did i run the 4...

looking for a tubular exhaust manifold with an external wastegate. got to be flanged for a 16 or 20g. if u just have an external wastegate that will be fine too.

im looking for the power steering reservoir cap that has the plug connected to it. without it plugged your 4ws light goes on.

looking for a kensington grey front and rear aero kit thats in great shape.

looking for the double din radio trim for my vr4!!!!!

looking for a 23 spline t-case thats in good shape and doesnt grind when shifting or leaks.

does anybody know any site to where i can get a fuel tank filler hose besides the dealer?

ok, heres the situation im having. when i start the car sometimes it cranks right up no problem and sometimes it wont crank at all. I'll turn the key 3 or 4 times before it will crank over and start. Last weekend i was driving and because i have 272 cams and my car idles up and down my car...

I looked at pics of other throttle body's that have the closed throttle switch but i don't have one on mine. Do i have a different throttle body or a different year throttle body? Do i actually need one? Here are some pics of mine. Also i found the plug wire tied up.

does anyone who uses the msd coil packs have pics of where they mounted them at?

does anyone know how much the isc costs at the dealer?

I bought a volt tester, can someone send me a link where I can find out how to test my iac motor?

ok, first when i start the car it will idle high and will not drop. Even when car is warmed up. I will turn the car off and start it again, and it still happens. I will do this around 4-8 times, then it will idle right. What could this be? IAC motor? throttle body? what? Help me please, this is...

ok, first off my car will run great for a while-like all this weekend. Then yesterday i drove to therapy for my back, and when i came out and started the car it idled all the way to 3000 rpm and wouldn't go down. I would come back 1/2 hour later and it would idle fine. if it idles fine when u...

First it started with the check engine light. it comes on every time i start the car and stays on for about an hour. After an hour ill turn off the car and turn it back on and the engine light is gone. This weekend i was on the express way and decided to put in a cd and forgot that i had the...

I'm in installing my t-case and i cant seem to get it all the way on. it goes on half way and stops. I'm moving it up, down, sideways while trying to push it on. I even tried to put the bolts in to start it. The bolts reach, but not enough to start tightening. Does anybody know a trick to get it...

i just dropped my trans yesterday(first time) and i wanted to know what car the trans came out of. i was told by devo tuning, (who installed it), it was an evo III trans. the # code stamped on it is W5M332WQWE QP7251. Can anyone tell me if it an EVO III or an 2g trans? THANKS!!!!!!

trying to drop the trans! Is there a how to link on here?

I am having a problem with my dash board light, its not coming on anymore. I checked the fuses and there fine, i even changed the dimmer switch and it still wont come on. I noticed that the temp switches light don't come on either. When i use the headlights the clock doesn't even dim like it...

i installed my polyurethane motor mounts and it vibrates like hell inside the car. I understand it going to do that but someone had told me i could change, i think the rear or front mount back to stock and it will eliminate the vibration in the car. Is this true? If so, which mount?

i have an aeromotive fpr that im about to install, and i would like to see where everybody mounted theirs, so can somebody please send some pics so i can get an idea!!!!!

im putting hawk pads on and i cant find the rear hawk brake pads. Does anyone have the part # for the rear or where i can find the rear hawk pads?

i need an o2 sensor and i was told i should get the one from the dealer instead of the universal. the oem one is $180 and the universal is about $80. Whats the difference? let me know what u guys think, and what i should do.