JDM Projector Fogs with wiring harnesses. Excellent condition, one broken tab, one missing trim cover - $150+s/hDon't forget to check my other FS ad out:More Stuff For SaleThanks.John

I am GVR4 free for 2011 and I found a bunch of odds and ends cleaning out the shed a little tonight. More stuff is sure to come so keep checking back.Most prices are somewhat negotiable but please don't bother trying to chew me down on a $5 hose end. If you really think any of the prices are...

Luke was nice enough to let me borrow one of his 16x8 RX-7 wheels to see if they will fit the Camaro caliper/Cobra rotor big brake kit that uses ron's brackets. Just a heads up for other's looking to run a 16" wheel with these brakes, they don't fit, the brakes are too big of a diameter to fit...

I need a confirmation that MB241883 is the correct part number for the OEM joint that will fit the front control arm of our cars?John

Can one of you that have done the Energy Suspension front subframe bushings answer this question for me? Does the bushings for the front crossmember come with the kit? I'm talking about the crossmember that the front motor mount (by the radiator) attaches to. The pics I've found only show three...

If you are I could use a piece of the radiator support. My GGSX was hit in the front and the previous owner didn't think it was important enough to mention it to me. I'd like to fix it and need a piece sawed out of the support so I can weld it into this one. It doesn't need to be from a GVR4 and...

Says who? Mine has been sitting since Christmas and hasn't been driven on the road for a year but today I charged the battery and it fired right up even with year old gas. Now I have to decide if I'm going to swap the drivetrain out to the GGSX or just pull the chute on these cars altogether.John

Chris is a great buyer. He paid quickly and didn't try to beat me up on the price.John

#1552 is destined for the junkyard:I was getting ready to drop the front subframe a little to make it easier to install new rear brake lines. When I got to the passenger front bolt I noticed the frame rail looked really crusty, I poked at it a little and by the time I was done I...

I have to replace the lines that go from the proportioning valve back to the rear wheel wells. Does anyone who has done this happen to remember how long of a piece they needed and what the tube diameter was? I'm pretty sure that the tube diameter is 5mm but I'm pretty sure that even the longest...

Bought a gauge from me, paid quickly with no hassles.

The following article was originally posted on DSMTuners by Turboglenn. All credit is given to the original author and site:Coolant Temperature Sensor AlternativeThis is a guide to replacing your stock Coolant Temp sensor. Either because your car's pigtail hos gotten too hot and the wires...

I got to drive my DD (FWD not GVR4) yesterday in the snow with these tires that I bought from Discount Tire during their $100 off sale. We had about 3 inches so it wasn't a lot but the Shadow went right over the mountain to get me to work without the road being plowed. I'm looking forward to...

I know there is a difference in the two of them but can someone either explain the difference or post a link that does? I've got a nice, fairly new Bosch unit that was in my GVR4 for a little while. I'm planning on putting it in the 1990 1G that I have apart ( THREAD ) but I'm getting...

I got a set of COP coils from him the other day. He shipped really fast and kept me informed on what was up. It was a pleasure doing business with someone who had a genuine concern for his "customer".John

I've bought several items from these guys, they've always had what I want in stock and shipped it very quickly.John

Anyone know the thread pitch? I know it's 12mm diameter but I need the pitch so I can order a #6 AN adapter.Thanks.John

I finally got around to getting this done. I had it done once before but it would begin to break up under boost. The service manual had very poor pics showing which pin on the coil pack was what so I had a hard time figuring out which pin did what without a connector to read the wire colors...

I just finished installing the "kit" that ron makes. He sells adapter brackets and centering rings to fit 2000'ish Cobra 13" front rotors and 1998'ish Camaro front calipers on our cars. If you want to keep 4 lug you can by drilling 3 new holes in the rotor hats which was suprisingly easy...

I wanted to post this in the Tech forum before it gets moved to the How-To section so I can get feedback and/or questions. Plus, a lot of people may not check the How-To forum regularly.How-To: Foglights Can Be Switched On Whenever Parking Lights Are OnAfter doing a lot of searching both...

Bought a FMIC from him and it was delivered as promised. Communication was EXCELLENT even when he had a family emergency, he had another member here let me know what was up. I would buy from Tim again and again with complete confidence.John

I've been battling this misfire for close to 6 months now. Every time I think I've fixed it, a few months later it comes back . The first time it happened it finally got bad enough to start happening at idle and it gave me a code #41 which is "Injector not continuously driven for 4 seconds...

Jason is an amazing source of technical knowledge. His help in my early and newbish attempts to put together a home made coil on plug set up that actually makes use of all the benefits a COP is supposed to have has been priceless. The only problem is everytime I think I've got it figured out he...

I was looking up the part number for an igntion wire set when I came across this on NGK's web-site.WIDEBANDIt's around $300 direct from NGK which sounds like a good deal. Now for the bad news, a replacement sensor is $170 so I don't know if it's still such a deal.John

I've know Ant for quite a while since he's local to me but this is the first business transaction I've done with him and everything went perfectly. Do not hesitate to buy from him. It's too bad we're losing him and his GVR4.John

I've know Armando for over a year and he's a good guy. He keeps us all updated on where and when to see WRC on TV. He also updates us on the latest versions of MMCD. All he needs to do is trade that Talon for a GVR4 and he'll be a GREAT guy .John

Not only was he the owner of perhaps the coolest Mirage ever, he was a great seller who delivered very quick and as promised!John

I need to take my leaky, crappy stock set up off and I have a question that was unanswered by the "How-To" on this. Here is a quote from the "How-To":Quote: The required fittings for the oil filter adapter are as follows, 2 each of -8AN flare to 16mm x 1.5 metric adapters (i'm almost positive...

I had been having a slight misfire for the past couple of weeks. At first it was only under high rpm/heavy load, then it became more and more prominent. Tommy let me borrow his COP set up and then his stock coils, neither helped. Then Underground let me borrow his coils and wires, still no good...

He just bought some parts from me and was a great person to deal with. No hassles, no lowballing, and quick payment.John

I was looking for info on some wheels today and came across this site:http://www.clubvaper.com/tech-wheelweights.htmlThis one even has stock wheel weights:http://www.scirocco16v.com/tech/wheelwieghts.htmIt lists the weight of a lot of different wheels and sizes. If the mods want...

After a small delay for totally understandable circumstances I got my injectors as promised. Jay is definitely a good guy to do business with and I would do so again in a heartbeat. I'm shocked there is no good guy thread for him already.John

He bought my GT32 turbo. No games, no 1,000 questions with no purchase. He wanted it, he paid, I shipped. Great guy to deal with.John

Totally smooth transaction. He even paid me right away although he knew it would be a week or so before the intake would be off the car.Johhn

I won a FMIC from these guys on ebay and 3 days later it was at my house and as described. A nice suprise in these days of ebay con-artists and slow shippers. 23.5x11.5x4 bar and plate core with end tanks already on for under $250 !! Definitely give them a look, the FMIC I got is on special...

Smooth transaction. No problems and good communication.John

Great member. Made us cool calendars and shipped them out quickly!!!John

Just got a set of exhaust maifold studs from these guys, $30 shipped! Ordered on Friday and recieved on Wednesday. If you need stainless hardware for any project visit their web-site and be confident that they'll treat you right.John

John was a great seller and shipped the cylinder head to me the day after I paid, even though I flip flopped once and backed out. Great price on it too!!John

Sent me my shifter QUICK!! I paid and a before the week was over I had the shifter in my hands.John

Paid for the exhaust housing quickly with no issues. I even sent him the part before he paid since I had faith in him. If DentSportGarage is run in the same fashion I think it'll do quite well.John

He bought some stock springs from me. Fast payment and threw me a few extra bucks for PayPal fees even though I didn't ask !! Great guy to deal with and I hope he can make it down for our next meet.John [ 08-26-2004, 11:51 AM: Message edited by: mistaVR4 ]

I've wanted to make one of these for a while and I was feeling a bit ambitious last night so I finally did it. If anyone else has interest in one I can give you the dimensions I used. The only place I screwed up is where it goes to the radiator I didn't make it long enough. I am going to try...