pot
Staff member
Quoting ghostinthevr4:
Here's a link to the carbon fiber hoods there's two models one is a Carbon Kevlar and is more money.
click
With this company I may still have a connect there, I'll have to contact some people.
This is dialogue I've exchanged with CFH based on the link ghostinthevr4 posted:
1.) What is the minimum quantity to produce = $600 x 10 = $6000
2.) Do you need a donor hood = yes
3.) Do you require a deposit/what amount = $6,000
4.) What would be total cost including shipping CONUS = Most addresses, east or west coast $175
5.) How long would it take to produce and ship = 3-4 months
6.) Is it possible to have a colleague visit your facility weekly or bi-monthly to check on the status of production? = no, if they travel to India then yes
7.) Are your hoods made in California or elsewhere? = elsewhere
8.) Are the hoods made of fiberglass with Carbon Fiber on the outer layer? = yes, outer layer only, if you want inner then triple the cost.
9.) This last question is farily lengthy. My collegue's tell me the JDM hood will have to be made into 3 pieces to apply the hood vents. The vents cannot be glued on as the heat will melt the glue. I would recommend you use those metal threaded eyelets that can be molded into the glass/weave.
I appreciate your time and look forward to hearing from you. = we can make it one piece
I'm still awaiting comment from one more vendor prior to making final arrangements (pending other member input) prior to going forwarding w/ taking orders.
Here's a link to the carbon fiber hoods there's two models one is a Carbon Kevlar and is more money.
click
With this company I may still have a connect there, I'll have to contact some people.
This is dialogue I've exchanged with CFH based on the link ghostinthevr4 posted:
1.) What is the minimum quantity to produce = $600 x 10 = $6000
2.) Do you need a donor hood = yes
3.) Do you require a deposit/what amount = $6,000
4.) What would be total cost including shipping CONUS = Most addresses, east or west coast $175
5.) How long would it take to produce and ship = 3-4 months
6.) Is it possible to have a colleague visit your facility weekly or bi-monthly to check on the status of production? = no, if they travel to India then yes
7.) Are your hoods made in California or elsewhere? = elsewhere
8.) Are the hoods made of fiberglass with Carbon Fiber on the outer layer? = yes, outer layer only, if you want inner then triple the cost.
9.) This last question is farily lengthy. My collegue's tell me the JDM hood will have to be made into 3 pieces to apply the hood vents. The vents cannot be glued on as the heat will melt the glue. I would recommend you use those metal threaded eyelets that can be molded into the glass/weave.
I appreciate your time and look forward to hearing from you. = we can make it one piece
I'm still awaiting comment from one more vendor prior to making final arrangements (pending other member input) prior to going forwarding w/ taking orders.