jepherz
Staff member
is a 3g mas adaptable to a dejon intake with a 2g mas on it?
The Top Mitsubishi Galant VR-4 Resource
Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.
- Software Upgraded - Reset Your Password to Login
In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.
Is the dejon round at the end, or the oval shape to match the 2g maf? The 3g is round. If you have used a fernco coupling or some other method like I originally had to adapt the oval to a round dejon pipe, it could work. The 3g is basically the same size as stock VR4 mas, about 3 1/8".
powerplay
Well-known member
Thanks to Iceman and Keydiver, I am getting ready to install my 3G MAS. Since the wiring is so easy, I just potted up an adapter, 2G to 3G today. Here are a couple of pictures. Once the potting has set up I will make a more permanent black cover.
Looks good. You should find the parts and build them for people.
I don't need one, but I almost did. I'm gonna go with the MAFT and GM MAF.
twkd
I don't need one, but I almost did. I'm gonna go with the MAFT and GM MAF.
twkd
i have a 2g mas on my 1g now...my buddy just put an EMS in his evo and im looking into wiring up his evo mas to see the difference. his is a number 399 tho, i dunno what that exactly means but im assuming its the same as a 3g other than the 1% better flow.
Bringing up this old thread to add one piece of information I had overlooked previously:
The documentation I have on the 2G #609 MAS indicates a pressure drop across the MAS of .92 psi at 240 liters/second of airflow. The spec on the #482 MAS is only .54 psi at 240 liters/second! That's probably good for 3-4 HP right there! /ubbthreads/images/graemlins/grin.gif
The EVO8/9 MAS is only rated at .526 psi pressure drop at 240 liters/second, in case you were curious. More good reasons to choose a #482 3G or EVO MAS over a 2G MAS. /ubbthreads/images/graemlins/wink.gif
Also, just to repost since it comes up fairly often, the #501 MAS is NOT as good as the #482 or EVO #399 MAS. It is only rated by Mitsu for 210 liters/second, and has ~.78 psi pressure drop because of the larger airhorn blocking the inlet.
I am now stocking complete packages of the good #482 MAS with the 1G-to-3G harness adapter:
#482 MAS package
Quoting 1uGlyGalaNt:
Are they good for more power than a 2g mas?
The documentation I have on the 2G #609 MAS indicates a pressure drop across the MAS of .92 psi at 240 liters/second of airflow. The spec on the #482 MAS is only .54 psi at 240 liters/second! That's probably good for 3-4 HP right there! /ubbthreads/images/graemlins/grin.gif
The EVO8/9 MAS is only rated at .526 psi pressure drop at 240 liters/second, in case you were curious. More good reasons to choose a #482 3G or EVO MAS over a 2G MAS. /ubbthreads/images/graemlins/wink.gif
Also, just to repost since it comes up fairly often, the #501 MAS is NOT as good as the #482 or EVO #399 MAS. It is only rated by Mitsu for 210 liters/second, and has ~.78 psi pressure drop because of the larger airhorn blocking the inlet.
I am now stocking complete packages of the good #482 MAS with the 1G-to-3G harness adapter:
#482 MAS package
Quoting 1uGlyGalaNt:
Are they good for more power than a 2g mas?
Last edited by a moderator:
