Price: $4800 Location: Katy, Texas 77449Contact: 832-609-0620Mileage: 147kUp for sale is my 92 Galant VR4. I really don't want to sell it, but I have other priorities that take precedence. It only needs a few things to button it up and have a well built car. The interior is in...

Looking for a rear view mirror in good shape.

After filling up (first time sense buying the car back), my garage smelt of raw gas. I crawled under the car and found the bottom of the tank moist with gas. I pulled the fuel pump inspection cover off and started it up to check for a leak, but it was coming from there.I think its coming...

Has anyone installed an AFCO radiator with ac?My AC works so I have no plans to remove it, esp sense I live in Texas.

Looking for a good lobro joint shipped to 77449.

My car's idle is all over the place.Here is a quick video. At 33 seconds is when Im coming to a stop and put the car in neutral and the idle starts acting crazy. clickThe car was idling fine until I adjusted the biss from 48 to 30. After which I put back to 48 but made no difference.

It only has one -AN fitting.$180 + shipping

My Galant has this really loud grinding noise coming from under the car, almost sounds like a bad bearing.I recorded a video, you can defiantly hear the noise I'm referring too. clickThe driveshaft was recently rebuilt.

$80 shipped

I have a question regarding cams.We all know that bigger cams help rev higher and help up top, but hurt turbo spool.My question is at what point are the cams over kill?A lot of people run 272's but are there any benefits over something smaller, lets say 242's?

Looking for a passenger side ac vent with no broken fins or tabs.

I'm looking for the double din trim piece that goes around the factory radio.Will this work well for an aftermarket double din touch screen?

So I've noticed my dash lights flickering when the blinker is on.When I try to roll the window up/down, they dim until I release the button.Has anyone had a similar issue, and if so what did you do to resolve it.

I'm looking for the factory rear view mirror and the dome light assembly.Shipped to 77449.

I need all the screws for the center console including the ones that for the radio and the arm rest.Shipped to 77449

Whats up everyone!7 Years ago I sold 136 to my buddy marvinmadman and this weekend I bought the car back. It feel great to have the car back in my possession.marvinmadman did a great job with the car in the 7 years he had it and did just about everything I intended to do.Here are...

What's up guys?Its been a while sense I've been on this site or thought about a dsm/gvr4.A few years ago when I still had a dsm I heard that some manufacturer stopped making transmission parts. And recently a DSM friend of mine told me there isnt alot of support for them anymore.I'm...

I have a 14b that I pulled from a spare motor I have.There is no shaft play!!Price is $180 shipped through PayPal. Please send as a gift or add 3% to cover feesMy PayPal is [email protected]

I have a set of Evo 550cc injectors for sale.They are in perfect working condition and pulled from my running car.I'm selling because I've upgraded to bigger injectors and have no need for these.Price is $135 shipped through PayPal. Please send as a gift or add 3% to cover fees.My PayPal...

Looking for a set of free or cheap headlights for a project.see my post here

Complete 6 Bolt 550 Injectors 2g MAF w/ Injen Intake & Filter Adapter 2g Manifold (might be an evo 3?) 2g FPR MHI 16g Mileage: I'll get the mileage this weekend $1000 + PayPal Fees & ShippingShep Stage 1 Tranny Shifts like butter 15k-20k miles $600 + PayPal Fees & Shipping...

I have a brand new in the box oem oil pump from extreme psi. They are currently on sale at extreme psi for $233 + shipping. I'm asking $225 shipped + PayPal fees.Contact: PM me here or for faster response call/txt me @ 225-788-7605

I have a complete running 6 bolt from a 1g that I will be pulling within the next few weeks and a AWD manual Shep stage 1 tranny.The transmission has about 15-20k miles on it. It shifts like new. The Motor: EvoIII 16g EvoIII o2 housing Open wastegate Just checked compression 8/20/13 ...

I have a stock GVR4 16g turbo in perfect working condition.There is absolutely no shaft play, and this thing did not smoke what so ever.$200 obo + shipping & PayPal fees.The best way to contact me is to call or txt me @ 225-788-7605

I have a JDM valve cover off a engine I ordered a few years ago.$75.00 shipped OBO

I have a brand new in box VR speed factory short route FMIC and piping kit flanged for a HKS bov.$325.00 + Shipping and 3% paypal fees.

90 DSM Oil cooler w/ lines: SOLDNon cruise throttle Cable: SOLDABS Elimination (I think one of the lines may be bent. Fittings are a little worn)SOLD1g DSM sending unit w/ walbro pump $65 shipped OBO92 VR4 gas tank. NO SENDING UNIT $200.00 buyer responsible for shipping...

Has anybody painted the center tail light section to see what it would look like?I like the way it looks on DSM's, and was curious what it would look like on our cars

Within the next week or two I will have a set of 92 Stock wheels for sale. They are in pretty good condition, but will need a good sandblasting and paint/powder coating.The tires are not any good.$100 obo + pp fees and shipping.I will take pics after work

I have an opportunity to buy a BNIB VR Speed factory Short route FMIC for $250 from a buddy.Is it worth getting and putting on my Galant? I know that it will take some finessing to get it around the ac lines and such.

So I hooked up a battery charger so I could open the sunroof and see how bad it was rusted.In the process, I checked all the windows and turned on the blower for the ac/heater, and guess what came flying out the vents.....RAT sh*t .SO now I need to pull all the duct work out, and while I'm...

Somebody on Tuners makes aftermarket fuel pump hangers for 1G's, and he is going to create one for the Galant VR4.From my understanding, the only difference is the 1g DSM hanger is about 1-1/4" longer.See his freelancer add here >> click

I just picked up a fuel tank from another member, but the inside is a little grimy, and has a little rust.What is the best way to clean it?

I need a hood, passenger side fender, and windshield cowl (metal piece under the windshield).preferably summit white, but any color will do.shipped to 70819Thanks!

I'm about to start stripping down a 90 Eclipse GSX for my Galant.I will be taking:Motor Tranny T-Case Oil Cooler Drive shaft Front Hubs Brakes Rear sub frame rear end brake booster brake master clutch master ECUIf anybody needs any parts let me know because this thing...

I'm looking for the complete sunroof assembly.

I have decided to sell my Galant shell because I have my eye on a running/driving VR4.Year: 1992 Make: Mitsubishi Model: VR-4 #147/1000 Milage: 184173 Price: $800.00 FIRMContact: PM me here or call/txt me @ 225-788-7605The AWS has been removed. The car has a 4-bolt rear end, but...

I'm about to start working on my engine bay and I'm looking for some options.I want to paint the bay black (white car) with something that will hold up good and won't scratch easy. I've been thinking about bed liner in a spray can. I had a buddy who pulled all the heat/sound barrier up from...

I have a set of GSX wheels that I don't plan on using.$150 + shipping & PayPal fees.They are dirty and were sitting in my yard, hence the mud.Rear steering rack. Was in perfect working condition when pulled from car.Willing to trade for parts!!

I need a fuel tank with sending unit and filler tube shipped to 70819.

Can an interior place fix this?

So today I went and picked up my Galant.As soon as I got it home I started looking things over, and I spotted some rust around the back window. Its nothing major from the looks of it, but I'm a bit worried what I will find behind the window.Whats the best way to fix this?

Has anybody done this yet?I want to change the color of the webbing, and I know your not suppose to dye it.

My wife works at an Embroidery store, and I was thinking it would be cool to make some GVR4 hats.I was thinking on the front have the silhouette of the car with "GALANT VR4", and your badge number on the back.I will come up with some designs later. Right now I just want to gauge interest...

Whats up everybody. I just picked up #147/1000 from Justin aka 147/1000.I also changed the timing belt on 885/1000 for him.I got a few pics of the car in its current state.