Topline 6bolt oil pump. Brand new. Comes with gasket and sprocket and whatnot. Retails for $140+. Looking for $100 +shipping. 1990 throttlebodys.com rebuilt throttle body. Never used. Service to your core costs $135 +$40core. Looking for $120 +shipping. Full gasket set for 6bolt. $40? I also...

Very good condition Galaxy Nexus for verizon. It has latest jellybean installed and the bootloader is unlocked for all you ROM flashers out there. It is the 32GB version and its grey. It will come with a wall charger/USB cable. Don't have original box because I bought this used. Just don't want...

Looking for the gear/sprocket that drives the oil pump off of the timing belt. Even a part number would help so I can oder from dealer if available. Thanks

First I have a socketed and rebuilt ECU. It's for 1G's '91-'94. The caps have been replaced. I got rid of my car before I got this ECU back so I have not personally tested it. If you purchase it I will gladly refund if it's DOA within 7 days of when you receive. $200 OBONext is a MHI Big16G...

If anyone has or knows anyone getting rid of these please let me know! ThanksEvo3 exhaust manifold(ported?) 2g O2 housing(ported?)

Looking for a set of used/new evo 8 or 9 pistons. Let me know!

Im 99% sure my passenger side grommet fell out and caused water leaking into the Ecu frying it. Looking for someone parting a galant that can toss me one my way.Thanks

Looking for a galant specific water neck. LMK what you got.

I have for sale a BRAND NEW fuelab afpr. It will come in original packaging and a brand new maperformance install kit. These are the only pictures I have currently. Asking $185 OBO shipped and PP'd.SOLD SOLD SOLD SOLD SOLDclickclickclick

Works fine my car is down so I need the money to fix it. $220 shipped and PP'd.

So I was driving to work today and I lost power to my engine. I can crank and crank but it won't fire. I noticed that my CEL doesn't light up when I turn my key to the ON position. Luckily I still haven't put my ecu back up into its spot so I unplugged it and opened it up. Visually everything...

So I plan on putting my stock piping back on but I would like to avoid putting the stock IC back on. If anyone has a JDM intercooler please let me know asap.

SOLD SOLD SOLD SOLD Good condition FIC 950cc injectors. Recently got them cleaned and tested by FIC. They're still in the packaging unopened. I have paperwork to prove it. Included are brand new seals and the old ones that I sent in with them(brand new as well). I'm asking $240 shipped OBO...

Good condition hard intake pipe. Could use a new coupler to attach to turbo. It is the recirc version.$70 +shipping OBO. I'm willing to trade for an evo 8 MAF and pigtail or conversion harness. For an extra $45 I can throw in a 2G MAF/pigtail/rubber intake. Will not separate.click click click

I have a good condition short route FMIC made for a 1G DSM. It is currently on my galant but I'm looking to go back to stock for now cuz I need the cash more the the IC. It will come with a bunch of couplers clamps and couplers needed and a Genuine Greddy Type-RS BOV. I only have one picture at...

I have for sale a SS 3" V-Band downpipe that was made for a 2g AWD Eclipse/Talon TSI. It should fit gvr4's/1g's too. There is a bung welded in for a wideband sensor and was made to adapt to the O2 housing I have for sale as well. The O2 housing is SS and has a 38mm recirc wastegate flange...

So I'm contemplating the idea of going completely back to stock and starting over. Unfortunetly When I put my FMIC on I hacked up some of my stick IC hoses to use as a coupler. I only need 2. The one that goes over the manifold and the one that connects to the throttle body elbow.Also I might...

Good condition came out of a running car. Going back to stock. Comes with couplers and clamps. The maf connector is cut off so it must be hardwired. $115 shippedclick

Just a quick heads up if anyone else hasn't heard. Less than a week away!I copied and pasted from a local forum. click Modern Automotive Performance 3rd Annual Sport Compact Proving Grounds Saturday – Sunday, June 25th & 26th 2011Brainerd International Raceway – World's Fastest...

Got a brand spankin new tubular T3 manifold. Came with a purchased car but don't need it. These go for around $200+shipping on ebay. I'll do $175 shipped OBOComes with a gasket.click

So I'm getting a couple gauges in on a trade. Both are mechanical autometer(boost, water temp). The question is has anyone installed one of the mechanical water temp gauges in your car? Where did you tap or screw the probe into? I'm not sure what the size is but it does say it has a 1/2"NPT...

Helping my buddy out doing his clutch on his 99 GSX. Starting to take the tranny out and notice something. You think this will just buff right out?

So I was helping my buddy with his 99 GSX and he was having a "can't get into gear with engine running" problem. First thought was bleed clutch/replace slave cylinder. Did that and adjusted the master cylinder. Still nothing. So I crawled under there and pulled the fork boot away from the tranny...

Hi I bought a WH1C a few months ago and have recently decided I shouldn't be a dumb noob and try to go big right away. This is equivalent to an 8 blade HX35. Stock it is internally wastegated. Im looking to trade for a good Evo III 16G. My turbo is in great condition there is no shaft play. It...

I posted in the link forums but nothing back yet. So I just got a v2 board for my gvr4 and have a couple questions. I used to have an innovate lc-1 and used narrowband simulation. I sold that a while ago and switched to an aem analog wideband. I've been running with just a plug in the stock o2...

...it. $12?Stock 3000gt/Stealth shifter. This what what JNZ uses for modification into short throws for DSM's/GVR4's. $40ExtremePSI 2"-2.5" 45* Coupler. Brand new. $25clickWalbro 255. Brand new never used. $70 shippedclick clickIf you're interested please post here, PM...

Not looking to spend more than $25-30. If anyone has one please let me know.

I think I read somewhere that the stock temp sensor to trip the fans would work in the thermostat housing. I don't have a/c so I don't need either sensor. Can I unscrew the very top one(points straight up) and put my fan switch there? Otherwise what can I tap into in the engine bay to activate...

I know there's a couple thread about this already but I need specific answers. I tried getting a rebuilt front left caliper from autozone because I needed it quick. They told me they would have to order it and it will be there in 2 days. Well 2 days go by and they call me saying Cardone...

So I made the big mistake of cutting off my stock pigtail to wire in my 2G maf. So now I'm looking to go back to stock so I can just get conversion harness's once I decide if I'm keeping 2G maf or switching to SD.

Anyone have the metal springs to hold the corner light in laying around?

It doesn't matter if it's recirc or not and I'm not looking to spend a bunch. I just need something that works and won't break. I'd like for it to be able to bolt up to a downpipe(ie: not a vband). I'm also looking for a 38mm wastegate.

So I want to put around $1200 towards building a new engine. I would LIKE a stroker but I can make do with a 2.0. In the end I would like to see between 400hp and 500hp. Basically I want a really fast street car. I plan on getting a hx35 and sticking with the stock exhaust housing and using a T3...

I lost one while doing my clutch so I just had one bolted in while I waited for oem one from Jnz. Well what do you know I was driving and I heard and felt a nice clunking down by my feet. Turned my wheels to the left and my axle moves around so yea. I need to know what I can use from ace...

Is there à way to do it without very many tools. I have no garage so I can only do it in my apt parking lot. I have a ratchet and wrench set. My belt literally broke so I have no worries of having to try to take it off.

Its been way too long since I took it all apart and im decently confident I remember where all the bolts go. The only thing I might have a hard time with is transfer case bolts. Anyone have a diagram of which lengths go where? Also I remember noticing while taking my tranny bolts out there was...

I've been waiting almost 2 weeks to find a place to do my clutch and finally got to do it today at my buddies house. Well me being a noob and working by myself 6 hrs later I finally get to the flywheel and bam! There's 7 bolts staring me in the face. So guys.... what are the differences besides...

No broken tabs, could use some touch up paint. Not really sure what it's worth so I'll just start at $15 shipped.

I'm kind of interested in hearing what you guys thought of painting a vr4 a non stock color. I know a few of you may think that it will lose its rarity in a way. I know painting a white, black or green one is slightly different than gray. I'm not sure what to do.Ps: please no "this color is...

I needto know the size of the bolt that holds the dipstick tube on and also the size of the oring

I've used both these for about 2000 miles. Both work great but I want to upgrade. The Innovate comes with the red DB gauge. $160 obo shippedThe boost gauge does have one problem which IMHO doesn't affect performance. When it is off the needle will read -1. It is electric and the color is...

Are the hangers/sending unit the same as the vr4?

How to make it work? I have the harness and everything and the timer works but is there a way to make the factory alarm still arm while the car is running? The harness has the standard parking brake, speed sensor and RPM signal wires.

I know there's some things you shouldn't buy from ebay but I'm wondering what your opinions are about this.clickMy car is pretty much stock but I want some room for upgrade. I'm thinking e16g with supporting mods until I wanna get nuts with a fp30 series turbo.I've narrowed another clutch...

Ok ecu gurus I have a predicament. I'm wondering why this wire is wired in between a cap and the "Coil "B2" for idle speed control motor" connector pin. Obviously my isc drivers are fried and that cap leaked but my car still runs(but with very bad idle). Is there something majorly wrong with my...

To buy a big 16g from a buddy that needs a rebuild? I've heard that rebuilds get expensive and its not worth it. I want to see what you guys think. Btw I'd be picking it up for $50.

Prosport branded gauge pods with small visors. I'm moving to an A-pillar setup so I'm getting rid of these. They're in good condition only used for ~3 months.Brand new this setup costs ~$35+shipping.I will sell these for $27 shipped

Should I be worried if I replace the ecu that it's gonna happen right away?

I'm going to be doing a boost leak check and everything tomorrow. I have a few questions. My idle was always weird. Before I had a steady idle at about 1500. When I first started it up the idle would surge between 1000-1500 until it warmed up. Then a steady 1500. I thought it might have been the...

I've read most of the threads on here about blocking off the lines for the 4ws but I have a few questions. I had my car up on a lift because I was redoing the exhaust. While it was in the air I let my friends dad work on the rear steering lines because they started leaking further back towards...