The Top Mitsubishi Galant VR-4 Resource

Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.

  • Software Upgraded - Reset Your Password to Login
    In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.

Tranny fluid

Brunoboy

Well-known member
Joined
Apr 25, 2008
Messages
2,880
Location
San Bruno,CA Home of SFO
i bought Mt-90 and a bottle of MTL today, I am gunna go and put the car on four jack stands, and start working on the oil leak, and the tranny, would a Rear main seal leak cause the clutch to mess up? I am also going to rebleed, and change the Axle seals and check the yoke on the Tcase
 

belize1334

Well-known member
Joined
Nov 18, 2003
Messages
3,316
Location
Bozeman, MT
RMS leak could contaminate the clutch surface and cause it to slip. It don't see how it could cause disengagement issues though...
 

Brunoboy

Well-known member
Joined
Apr 25, 2008
Messages
2,880
Location
San Bruno,CA Home of SFO
So, uhm, I guess I didnt adjust it correctly. The slave was so soft that I can push the rod in all the way. and I could move the fork around, So I readjusted so that its solid, and re bled the slave for 20 minutes using almost a full bottle of fluid, with all that said and done, it shifts so smooth.....I bought the redline for nothing -___-, I might as well put it in ahaha, Thanks guys
 

I used royal purple throughout. It's got a rep for not sucking /ubbthreads/images/graemlins/grin.gif
 
Support Vendors who Support the GVR-4 Community
Boosted Fabrication ECM Tuning ExtremePSI Fuel Injector Clinic Jacks Transmissions JNZ Tuning Kiggly Racing Morrison Fabrications RixRacing RockAuto RTM Racing STM Tuned
Top