1990ggsxnj
Well-known member
So got an engine for the Gold GGSX which was working before the car was parted. Put the engine in(trans remained in car) and now the clutch will not disengage. Did a system bleed as well as pushed the slave as far inward as it could to and released any trapped air in there. Had helper step on clutch to push fork as far as the system would let it go then used pry bar to see if there was any more travel on the fork but there was not. Shifter Linkage is in the same location. The clutch never came off of the engine and the Trans never came out of the car. Both were working before the swap.
What now? I know sometimes you have to have the fork shimmed but it was working perfectly before the swap. /ubbthreads/images/graemlins/dunno.gif
What now? I know sometimes you have to have the fork shimmed but it was working perfectly before the swap. /ubbthreads/images/graemlins/dunno.gif