conquesttsi
Well-known member
I finished installing my clutch for 1933 yesterday.
Seemed to row through the gears fine with the car off.
Started it and the car jumped forward. Figured out that the I was not in neutral (like the clutch won't disengauge.
I was able to get it into neutral with the car off, restarted and was able to idle fine....rev check fine...not moving foward in neutral.
Can't shift.
I put in a brand new flywheel act extreme pressure plate and street disk with new pivot ball w/washer, fork, tob. stainless clutch line.
I didn't bleed the system as I inspected the action visually while my girlfriend pressed the clutch in and it looked good.
Possible solutions: A. I still have air in the system and should bleed it. B. Master cyl needs adjustment.
Does this sound like what might be causing my issue? Any other Ideas. I am going to bleed the system and adjust the master reguardless at some point this week.
Seemed to row through the gears fine with the car off.
Started it and the car jumped forward. Figured out that the I was not in neutral (like the clutch won't disengauge.
I was able to get it into neutral with the car off, restarted and was able to idle fine....rev check fine...not moving foward in neutral.
Can't shift.
I put in a brand new flywheel act extreme pressure plate and street disk with new pivot ball w/washer, fork, tob. stainless clutch line.
I didn't bleed the system as I inspected the action visually while my girlfriend pressed the clutch in and it looked good.
Possible solutions: A. I still have air in the system and should bleed it. B. Master cyl needs adjustment.
Does this sound like what might be causing my issue? Any other Ideas. I am going to bleed the system and adjust the master reguardless at some point this week.