So I can't figure out how to post logs on there site, I assume theres another host site that I have to upload files off my computer, I only know how to do that with photos but not sure about files from my logger. I have made adjustments to the VE and press the upload button and the AFRs would be closer to my target but the VE number would be way down to like 17.6 after I do the 1500rpm adjustment to make my AFRs about 13.0 I would go higher and try to do this with the car not moving throughout the entire rev range. After messing with it until about 2500rpm I would go back to idle (1500 RPM) and the AFR's would be way off back to about 11.0 so even though I was hitting the upload button it seemed after a little while the fueling would go back to its base map. Oh and on decel sometimes my AFR would lean way out to about twenty.
And incase anybody has some thoughts on this it would probably help to post the engine setup
Forced performance 16G
Race manifold for the 16G
FMIC
GM 3 bar map (speed density setup for jackal)
RC 725cc injectors and 255lph fuel pump
adjustable fuel pressure regulator
3'' exhaust that stops just before where there would be a cat ( I need to buy a cat-back)
the software is ostrich 2.0 and I have a zietronix logger and display box
and wideband 02