Either need to borrow one or purchase one. Thanks

I appear to have all things needed except the vent tube. LMK if you have one. Thanks

Connector was cut off by the previous owner. I'd like to put one back on. It's the sensor that sticks straight up out of the thermostat housing. Thanks

Going to have to helicoil a couple holes on the trans. Bottom hole for the Transfer case and 1 hole for the trans mount. What's the size and pitch for these? I would like to have them ready for when I get it apart. Thanks

I'll need everything

Can someone with Ecmlink V3 measure Voltage on pin 10 in the DLC? This guide says 4.5v, but im getting 12v and the reason for this is I'm getting the "No response received" from Ecmlink.click

Where does it go? The wire is in the harness and I'd like to use that with Ecmlink to control something. I'd hate to cut it and run another wire through the firewall if the current wire is already under the hood somewhere. So where is the other end at? Also the color is Light green/blue, not...

$45 shipped OEM 450cc These will need both o-rings and seals.$120 shipped FIC 780cc injectors that never had fuel run through them. They are labeled 1-4. They will need the rail o-rings. Lower seals are still new.

$100 shipped. Includes cradle/charger and a nice cable. It's only missing a stylus. Thanks

Sprung a small leak on the heater pipe where it welds to the main radiator pipe. So I need another pipe to replace it. I realized I can use a NT pipe and still run coolant to my FP Red via the FIAV nipple that's not being used. Thanks

Looking for one so I can bring that to my local driveshaft shop to see if he can balance my driveshaft before I take it off.

What's everyone doing with the bulky belt guide?

Left over from using the u joints. Just pay shipping and they are yours.

Need one in good shape.

I almost picked up a non powered antenna from the local PullaPart, but it was messed up. So I need one. Thanks

All prices are plus shipping.$10? Very lightly used 5 lug big DSM rotors. Probably 5 miles on them $40? Rebuilt NA t-body with turbo seals and no sensors Sold New caliper brackets without boots Sold Junkyard NA t-body

So I can't remove the shorty filter with my 3" downpipe and 90 OFH. I'd like to get a relocation kit but I'm unsure on which housing will fit/work best. Info on this seems to elude my searches.

Not sure on the spline count yet as I still need to remove it.

I need a rebuild mine but some of the parts are backordered. So if anyone has a good working driveshaft, I need it.

I want to upgrade my whole setup. I want Russell classic hoses and plan on modifying my stock fuel hat to -8AN. What is the best way to accomplish this? Buy a complete kit or piece it together?

I went to their website and I can't view any of their products.

SS o2 Housing would be nice. I also need a Heat shield to fit a 14b turbine housing. Thanks

Anybody know off hand what I'll need to correct this dogleg in the shifter cable?

Anybody know the exact size orings that go on the pump for the high pressure line?

I'm in need of the clips that hold the cable at the caliper.

I need a set of OEM heat shields for my 2g manifold and O2 housing.

What's the options for plugging the oil port in the head when sourcing oil from the OFH? I am looking at maybe doing something simple like a bolt from Home Depot or something if I can't find a factory plug at the pullapart yard. Also what cars would have them? NT eclipse? Hyundais? Or if I have...

Need a turbo. 20g is leaking oil. Needs to be mitsu bolt on.

I guess I'll see if any one is selling one before I buy it new. I already have a chipped ecu.

I have what appears to be a mild problem. I plan on running fuel line from the pump to a barbed fitting to exit the housing. Then welding it or possibly glue it to the top plate with some fancy sh*t if the plate is too thin. I need some assistance on which fittings to buy as I never dealt with...

I need to heli coil the driver's engine mount. It's the two bolts that go through from the top into the mount on the engine. Hope that makes sense. What kit do I need to buy? I don't recall the size. Thanks

Looking for one. Lmk thanks

I need the front brackets if anybody has a set.

Anyone ever use these things? I am looking into using them on my Excursion as the wheels I have are not very "stick on" weight friendly.Click

Could anybody tell me where to find a diagram of some sort to help me diagnose my ect cel? The logger shows -75 for temp. I swapped the sensor and wiggled the plug but the wires have a couple splices in that area. I have a spare harness to use, just want something for backup in case I get lost...

This is what I have after running the motor for about 30 seconds. I'll pull it apart in the next few days, but wanted to see if anyone seen this before. Its leaking through the front of the pulley?

What is the best in-tank Pump for the money? I need to order one. Ive only had two different pumps in my previous Galants, Supra and Walbro hp255.

Long time, but finally started it up. Lots of work left though. No downpipe...click

How does the 2g awd downpipes fit with a 1g catback on our galants? Any modifications like lengthening the cat back? I searched but honestly could find anything clear cut.

Sorry for the dusty engine pics. I needed a bigger vehicle so I bought another Excursion. 59k miles with $0 deductible full warranty until 90k miles. Every option available. 5.3 v8 with active fuel management. Tap shifts. K&N intake. Navigation. Heads up display. Remote start. Sunroof...

I need a kit. 20g and 90 TB. LMK what you have. Thanks

Want to borrow one if possible. I need to break in this newly rebuilt engine and I'd rather do it on a stock setup. Thanks

Where can I find the front outer bearings for my damn 5 lug swap hubs? All I can find is the inner.

Would a base Galant lines work? Or a 1G Non turbo FWD? I searched but couldn't find anything.

Bought a SS exhaust manifold cover and all went great. Great transaction. Fast shipping."Ebay mode off" [ 05-19-2004, 10:46 PM: Message edited by: marvinmadman ]