JSchleim18
Well-known member
What is the black with yellow striped single pin connector that is connected with the reverse light switch for? This is right by the transmission.
Thanks
Thanks
The Top Mitsubishi Galant VR-4 Resource
Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.
- Software Upgraded - Reset Your Password to Login
In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.
Need help figuring out which connector this is???
- Thread starterJSchleim18
- Start date
JSchleim18
Well-known member
A little help here guys /ubbthreads/images/graemlins/dunno.gif
CSMShaun
Well-known member
I am almost 100% sure that connector is for the starter solenoid. There should be a female connector with the same color wire that connects to the starter somewhere....
Correct me if im wrong but the car wouldnt start with out that wire not connected. Is it possible the wire that connects on the TB its a single wire? A pic may help also.
Jesse
Jesse
CSMShaun
Well-known member
Correct the car would not start without the wire I previously described. The wire that serves the Idle Switch is bundled in with the ISC Motor wiring and would have had to be modified to be down by the transmission. The starter solenoid wire, however, is found in the exact location he described.
I agree that a picture, if possible, would help a lot in confirming the function of the wire in question.
I agree that a picture, if possible, would help a lot in confirming the function of the wire in question.
