Lower shores performance mbc

Hey guys I just got around to installing my lower shores performance boost controller and I have a few questions. What size vacuum hose do you guys use to fit the smaller diameter on the waste gate nipples of smaller turbos like(Mhi big 16g only about 1/8") to fit with larger one on the lsp mbc which is 1/4" I believe? Do you guys use some kind of 1/4-1/8 adapter or do you stretch that 1/8 hose to fit over the 1/4 nipple on the mbc? I can't get the 1/4 inch hose tight enough over the wg nipple or stretch the 1/8" hose no matter how much I pull the damn zip tie so it doesn't leak any suggestions.Thanks
Dunstan.....

 

[1990ggsxnj]

I've not had any problems using silicone hose though others have.
If you really can't get it on with spit and determination you can always go to the vacuum/emissions section of any local parts store and find what you need.

 

So do you use a 1/8" and stretch it to fit the 1/4" fitting on the mbc or do you use a 1/4" hose and zip tie it down to the 1/8" wg nipple? /ubbthreads/images/graemlins/banghead.gif

 

Use the 6mm / 1/4" silicone hose & zip tie it to the 1/8th nipple.

 

Thanks Garfield that's the kind of answer I was looking for. Now time for a complete boost leak test....