rdomeck
Well-known member
Well...If anyone ever wondered if an EVO 8 intercooler would fit a GVR4, it will. Only took a few modifications. Started with hanging the core and making sure the bumper would still fit. Then started on the plumbing. There is a lot of pipe compared to the top mount tat I was running.
Used a lot of the EVO piping, mainly the bends and transition from the smaller diameter from the turbo to the larger diameter. Used some strait tubing cut to 15 degree's for the tight radius that I needed on each side of the core. Guess we will see how it works. Any thoughts on the best place to pull the signal for the waste gate? I believe the original is from the J pipe right at the turbo.
Oh, I get to keep my fog lights!
Used a lot of the EVO piping, mainly the bends and transition from the smaller diameter from the turbo to the larger diameter. Used some strait tubing cut to 15 degree's for the tight radius that I needed on each side of the core. Guess we will see how it works. Any thoughts on the best place to pull the signal for the waste gate? I believe the original is from the J pipe right at the turbo.
Oh, I get to keep my fog lights!