EfiniX
Well-known member
Evan is knocking up a PoC heat shroud for the FP manifold. I thought it might be fun to take some temps from my current setup to compare to the finished product. Currently, I've got titanium cloth around my FP mani, and reflective heat tape on my IC piping as it goes over the top of the manifold.
Temp gauge tops out around 666F (which is oddly evil and specific).
Before:
click
After:
click
Forgive the ticking. It's not an exhaust leak or lifters. I have my license plate on a hinge so it swings up at-speed and allows more airflow to the intercooler. That hinge makes a bit of noise while idling.
Temp gauge tops out around 666F (which is oddly evil and specific).
Before:
click
After:
click
Forgive the ticking. It's not an exhaust leak or lifters. I have my license plate on a hinge so it swings up at-speed and allows more airflow to the intercooler. That hinge makes a bit of noise while idling.
Last edited: