Hey guys, the time has come to let the VR4 go.I've had it for over 12 years and it's been one of my most reliable cars.We have to many cars at my home and it's time to say goodbye.The GVR4 has been in my daily driver rotation the entire 12 years and 2-3 of those years was my only...

Haven't done the whole schematic troubleshooting effort but will if necessary..Have any of you had your headlights shut of randomly for seconds at a time?Mostly over bumps, but it "feels" like it's related to the hi/low headlight switch.

Hey guys, I've somehow managed to bugger up my high side ac connection and will require a new high side line.Can I grab one from any 1g dsm or are these specific to the gvr4 (length)?

Done!!Drastic improvement, and working horn to boot!!

I have a very annoying squeak coming from the door/lower b-pillar area and I cannot locate it.Have you heard this and if so, how did you fix it?Sorry about the video orientation, was focused on drivingClick Me

Hey guys,I've switched to Evo IX wheels and don't need these guys anymore.They are in "ok" shape and currently plasti-dipped white.There is some curb rash on a few of them as well.I'd hate to throw them away, so I"m willing to let them go real cheap, tires have about 40% tread left as...

Need a bit of help guys.I've done DSM wheel bearings before, but never had this problem...Front bearing race is stuck in hub and my 12ton Harbor freight press is flexing and making me uncomfortable (even after tried torching it with a map gas torch)trying to push it out. I'm having...

All our plastics are getting old and brittle...Anyone here have access to a 3d printer?I'm sure some of us are willing to pay for certain smaller plastic parts

Hey guys, I switched to ECU controlled boost and now I have no need for this profec boost controller.Unit is 100% functional!!Ebay name is tsitalon2 if you want to look up my rating.Let me know if you want it.$125.00 obo

Currently have Evo IX struts (non-MR) and springs (1 coil removed)Car rides great but is a little harsh over bumps.Do swifts provide a little softer ride?Car is DD only so I'm not sure if I need Swift-R's or not, any suggestions?

20yr DSM vet - complete newb with respect to wheel specsWill these wheels fit?clickI still have the 4x100 stock lugs pattern, but I do not know what widths/offsets are acceptable....

***FREE****FREE***FREEEvo X parts. Come get them.Stock Down pipe Stock Muffler Stock O2 housing Stock red aero kit side running boardMoving across country so I am giving them away free. My good deed to the community.Will not ship.. Come get it or have a friend get it for you.Location...

Looking for cold air inlet ideas. .. my open element filter is seeing 140°F temps here in Texas.I'm still using stock battery location, but wouldn't mind moving to the oem charcoal canister spot. Also using a 3g MAF. Please post your setup that isolates under hood temps from your filter.

Hey guys,I've tried optomizing my system for the San Antonio temps here and I've done ok. I've now located a local source some good ole r12 here and plan on reverting back to r12, but wanted to make sure I didn't miss anything.Current system with r134 and 95º ambient behaves as follows...

Hey guys,I'm hoping you can help isolate a driveability issue for me.For some time now, I've has this stumble right off idle as I'm just getting on the throttle. It only occurs while the motor is cold.I've attached a log with two captured events.This issue has persisted through tuning...

I'm sticking with my Evo316g, as I really don't want a large turbo anymoreAny of you guys running 350+ whp on your GVR4's with PUMP GAS? If so, post up your dyno plots and mod list if you don't mindLooking for pump gas guys

Hey guys,I need a little help diagnosing a slight overheating problem I have and need to make sure I'm not missing something stupid, so I thought you guys could help.Here's my issue: I'm seeing ~230ºF cruising on the Hwy (65-80 mph)Other info: Temps are in check at idle, low...

Let me know if you have one your willing to part with.

ey guys,Need a little help diagnosing a boost drop off issue.Target boost 20-21psiMods: stock manifold stock o2 housing 3" DP with 2.5" o2 flange Mil spec 3" racing metal cat 3" catback with no-name performance muffler IR 3 port BCS 3" K&N open element AF Crushed BOV (not audibly leaking...

Hey guys,I bought my 1991 Belize green GVR4 from a fellow in NC I believe about 8-10 years ago. It did not contain a numbered badge and the guy I bought it from didn't know much about it. Before I bought the car I ran the VIN through CAPS and my insurance company which did pull up as a VR4...

Hey guys,After a great discussion with some of you I have decided that my future build will most likely be a 2.3L stroker with 9:1 compression mated to a Evo316g turbo or maybe a Borg Warner turbo. Discussion HereGoals for this build are maximum torque across as much powerband as possible...

So this might not be in the right section....So for the longest time i've wondered if it was possible to build what I call an ultimate 4g63 street motor. So assuming money is not a factor (which it is for me right now) I wonder if the below goals can become a reality. Keep in mind I'm...

Hey guys,Just moved to Texas and my A/C is not up to snuff.Short story: Replaced compressor Dryer Expansion Valve Cleaned Evaporator and housing Replaced all o-rings Had A/C shop flush and fill Heater core bypass A/F fan resistor bypassed (fan on high when on)Long story...

I understand is for the A/C, but does it control maximum cold temps?

Possibly looking for some 720-1000cc injectors...hit me up.

Looks like after I've fixed my A/C and bypassed the A/C fan resistor, my Alternator, can't quite keep up with the load.Looking at buying an Maniac Alternator and wanted to see if how many here have had good luck with them. It's about $70 more than a premium 90 amp Bosch Alternator from Napa...

Have any of you guys successfully used an aftermarket gasket set for DD car?

Can the expansion valve be replaced with the dash in place? Is it possible to replce it with the evaporative core in place as well?I can build motors and tranny's, but I'm sorta a newb at A/C stuff

My top sensor is unplugged and has been for years, car operates fine as does the A/C (well until my compressor just went out).I'm planning on doing some AC revamp, and would like to get this connected, but cannot locate the plug or wires for this sensor.Does the pigtail for this come from...

***I'm not sure if a thread like this exists, so if it does, feel free to delete it.***Hey guys,This thread will be used to document in-cabin sound levels (Decibels) of exhaust setups.We will use the android app "Sound Meter" found here: SOUND METER APPI did not use the...

Hey guys,I never thought that the guy that once had a 500+ hp eclipse would grow old and prefer a quieter car! I still love my GVR4 and it's still me DD thoughI currently have what I believe to be one of the quietest setups, but please let me know if I am wrong.My setup includes a 3"...

Price: $285.00 Payment method: PayPal Item condition: 10 Preowned equipment, but appears as new Shipping instructions: Will ship Fedex ground to CONUS onlyUpgraded to a D800 and no longer need this lens.Lens is in impeccable condition, not a scratch and no fungus. Images available upon...

Anyone have a Prop valve for GVR4 with ABS?If so, please PM me.

Hey guys,Need a little help. My vr4 never seemed to stop as well as I would like and today I verified why.No hydraulic pressure to the rear calipers at all.The car is an ABS car so I am unsure if I need to replace the Prop valve, look for a blockage in the lines, or look at the ABS unit...

Always careful with my A/C vents as I know that plastic this old is brittle....wouldn't you know my radar detector falls off the windshield and shatters my center vent. DAMNIT!!Anyone replace a center vent? Does the dash have to come out? Good source for center vents?

Anyone have a how to on this?Search not working well for this.I have a spare in my garage and I would like to install it

Hey guys,Recent replaced ALL coolant hoses.Problem is, now I spotted a small leak on the ground directly under the A/C compressor. Upon examination, I find coolant on the back side of the compressor(opposite of pulley) side.My first thought was maybe I didn't tighten the heater hoses as...

Hey guys,I'm thinking of obtaining a Cyclone manifold. As I understand it, it can produce 30-40ft/lbs from 3k-4k and the added torque would be welcomed on my Evo3-16g with 7.8:1 compression.This is what I think I need to make it work:Manifold Canister ECMlink ActuatorAm I...

Hey guys,Replacing my clutch soon and second syncro seems a little worn, so I'm looking to replace it.The tranny that's been in the VR4 for years is/was a junkyard tranny for $60, unfortunately the VIN number is missing and the only identification I have is the model #.I have rebuilt 20...

Hey guys,Need help locating the Idle Up A/C switch. Idle rock solid at 900 with A/C off...drops to

Hey guys,I have 15 irons in the fire and one of them is upgrading the audio in the GVR4...Money is fairly tight, so I'm not looking for a competition sound system or anything. My goals are simply a conservatively powered nice balanced system with some punchy bass, nothing boomy.I replaced...

Hey guys,I'm painting the car and need to replace all the clips that secure the cladding to the doors/fenders.Where is the best/cheapest place to get these? I need to replace all of them!

Need one...Got one?

As Title reads....I need the pass side fender cladding from a VR4.I don't care what color, painting anyway.Do need it without any broken pieces/tabs.

Hey guys,I've probably had this issue for a while and never noticed because my daily commute doesn't allow for any really hard left turns, but lately I noticed this...I believe the car has a 1g pump/sending unit installed with the normal inaccurate fuel gauge.Pump itself is just a...

Hey guys,What are are options for increasing braking performance while staying with the stock 15" 4 lug wheels?

Hey guys,I've had an Evo IX suspension setup on my car for about 2 years now that a buddy fabbed up for me. It looks great but sits low and the ride is a little too firm and bouncy. I have another set of springs, just sitting in a box and I want to fix the ride quality by raising the car a...

Misleading topic??? no!Anyone know where I can get a hold of the original windshield wiper squiters? I assume the dealer cannot get these anymore. 2 years without them have taken their toll!

Hey guys,I'm looking for the quietest 3" muffler that can support 350bhp. I would assume Magnaflow would be the best, but I am not sure which model would work best/fit. I would prefer dual tips but can live with a single. I would like it stock appearing.Any suggestions?I will have a shop...

Hey guys,I have a Tokina 50-135mm 2.8 lens in mint condition. It has been used for about a year and has no scratches, dust or fungus at all.I purchased this lens new one year ago and still have all paperwork and boxes.Asking $500 net to me after shipping/feesPM me or Email at tsitalon1 @...