I am look for 1g AWD automatic transmission, transfer case and rear diff. I am doing a 1g manual to auto swap, so if you have any of these parts or other parts I need for this swap, send me a msg. If you have technical information on this swap don't hesitate in sharing with me.

Ok I have a AEM EMS 1310 series 1 for sale for $550, or willing to trade for a new Quartermaster Gear-Drive HD RACEClutch Disks for the 6 leg clutch. I have seen it for $550 shipped click here. The back story is my wife has forbidden me to spend any money without selling something, so guys help...

How much for the 1g swap shipped to 29449

How much for the 1g swap shipped to 29449

Quoting dewman: Look up posts/threads for Mark on here.Thanks for the usefull info

I am looking for anyone that has done this or still have the car with this conversion.

I just looked a my race car and my Galant and thought of doing this just today. Can you post parts needed to make this happen.

Still have these!!

I need to get $185 shipped for EVO ECU and $125 shipped 95 eprom I will take $300 for both

I have both for sale I have a 1995 auto eprom ecu and a EVO 8 ecu Txt me your best offer shipped to what zip and for what ecu. I will respond promptly I am on the east coast 29407 cell # 8433644552 I am out of town so i dont have any pics and will not be shipped until next week. The 1995 ecu is...

You can find your answer on the AEM EMS fourm

I have the intank 255 Walbro and a inline Bosh 044 with a Aeromotive FPR. I am making north of 550whp with no hobbes switch. Should not be a problem as long as you have a aftermaket FPR

Do any one have the Deadtime/ scale values for 1200cc Advance Fuel Injection injectors.

how did you get the 1g radiator to fit pics pls

Hey I have a house in Charleston and I am there about twice a month. What parts do you need if I don't hhave it probaly know where to get it locally

ok I will try the factory location, the floor and dangling is not a option. I had it mounted behind radio in my talon but don't thing wires will that far because the Galant factory ECU is in the passenger side kick panel

Ok guys I have these parts already I am going to use my AEM EMS (My talon was already a full stand-alone) just wanted to know if using the EVO 8 maf or the AIT and MAP pros/cons on a DD.

I am taking my Talon and all parts I can use will be put on the galant. I need to know the pros and cons of using one over the other.

The people that have AEM on thier Galant where are you mounting it

I am trying to find the physical dimensions of the gt4088 or someone with first hand knowleage about this turbo. I am looking to replace my turbonectics t4 turbo with a to4s compressor housing and 3' vband. Is the a big physical difference if any in the compressor housing

Anyone using AEM EMS to control the idle air control valve on a Mustang throttle body?

I have had my zeitronix for 5 years and have seen the company become very big in the wideband game. I originaly bought because they where a fellow DSMer's

Ok thanks

Quoting cOmpressor: C'mon man, I didn't even use the search function.ETS web page Most likely sold already but for reference:FS: add on 1st page Read my post above your and then read the product description. I don't want to move the air box I will have one made. Thanks though

A friend I where discussing EBCs, I thought I read sometime back that EBCs can't do boost in the 35psi plus range. EBCs like AVCR, Profec, GIZMO, and Blitz

The only one I see relocates the stock intake and is made to go with there intercooler kit

Does anyone make intake pipe that is a factory replacement. I want my intake box to remain in the same location. I did a lot of work to install a Evo mas and filter in the factory air box to keep with a factory look

That's Jeff I should have been a little clearer Would doing this send the correct signal to ECU

Do I connect the purple wire of the ZT-2 to pin 4 of the ECU. I am wanting to delete the front o2 and run only one o2 sensor. This car is not daily driven

I notice some pics of engine bays that have the coils mounted under the intake manifold. I want to know how it is mounted pics could help alot I Have a set of of new Msd Blaster coils and wanted to use them instead of buying a new COP set up

I have a 91 Belize green Galant VR4 #1750 roller for sale. I bought it a little over a year a go. Never got time to work with it other than to remove engine. The interior is what sold me on the car it is super clean. The paint on hood decklid and trunk is faded, the side panels are not. The car...

To make a catch can go to your local salvage yard get a air condition dryer off any car that is close to the size you want. after look at it you will see what you will have to do this is what you see on most sportman racers. The exhaust way works great also but you will need to run open exhaust...

Where Can I find install direction for this battery tray?

Hey I want one PM the price shipped to 30909 did not see it. Inpics the factory intercooler piping can be used right

I think if you get the adjustable suspension gauge pod as seen here click gutted out and had the digital gauges made buy click you could get at least 3 of them in there Gauge dimensions: L=2.12" D=.6" H=1.37" I know where one is

Quote: Here's what I've done...This houses my EGT and Wideband2g deck???The deck is actually mounted from the side with only 2 screws...and yes, I know it's an old ass deck And the S-AFC is just mounted with magnet tapeI want one of these ASAP