hey im looking for an oil dip stick and a drivers side kick panel

looking for a driver side kick panel

what would be a good location for the push button?

the red, the black, and the blue wires go to which wires on the ignition switch?

im installing a push button start with wires coming from a relay that has 1 red, 1 black, and 2 blue wires coming from it. Im trying to hook it up to my ignition switch which u see in the picture. Can someone tell me which wires go where?

looking to buy a good working ignition switch.

i just installed the alternator relocation kit and everything looks good but when i started the car i heard a rubbing noise, looked and the nut on the pulley is rubbing againt the frame of the car. Is it going to rub itself out or should i grind down the frame?

i just installed an alternator relocation kit and need to extend the wiring. i already have a 4 gauge wire going to the battery to the alternator, but do i still need the two positive white wires? Since im using the 4 gauge from the battery to the alternator can i eliminate the two positive wires?

Im looking for the 14mm bolt that is closest to driverside that bolts the carrier bearing and the AC bracket to the block. Im missing mine because i eliminated the ac when i first got the car and dont know what i did with it and i need it for my alternator relocation bracket. Does anybody know...

the link helps me alot, but im missing the 14mm bolt that is closest to driverside that bolts the carrier bearing and the AC bracket to the block. Does anybody have one or know what thread and length it is?

Does anyone have a link or something on how to install this alternator relocation kit i got from jay racing?

hey, i have a leak on the steel brake line that goes from the engine to the rear wheel. the leak is right in front of the rear driver side wheel. would it be best to replace the whole line or just cut it and replace the half thats leaking. Just to let u guys know i never done this before so its...

im looking for a good working windshield wiper relay

i called the dealer and its no longer available. does anyone know where i could get one

i went to advance auto but they dont have that relay, do i have to go to the dealer?

is this the windshield wiper relay? its on the left side of the firewall. my wipers run slow but when i disconnected this relay they still were moving. can someone send a pic of the right relay?

i got a set of kensington grey door cladding off of a galant gsr. looking to trade for a kensington grey driver side rear door cladding from a vr4.

hi, im looking for the rear door driver side door cladding. mine came off on the expressway. I need one in good shape, preferably in kensington grey color. If not, one in real good shape. THANKS!!!!!

i put 4inch polk speakers in the dash and 5 1/4 component set in the front doors and 6 1/2 component set in the rear

i had to replace my alternator, but before i replaced it i ran 4gauge wire from the alternator to the battery. I put the (piece of sh*t) alternator from autozone in and it wasn't charging my battery. alternator was no good. I only took autozone because of the life time warranty. Did i run the 4...

I have been looking to upgrade my alternator and called CSS in Chicago that builds alternators and they told me that i don't really need to upgrade my alternator wire. I'll be putting in a 140 amp alternator and i'm using a JL 1000 amp pushing my W7 and they said it should be fine. They said if...

u can probably find it on ebay.

looking for a tubular exhaust manifold with an external wastegate. got to be flanged for a 16 or 20g. if u just have an external wastegate that will be fine too.

I bought a power steering reservoir off pot and it was in excellent condition and was shipped fast. THANKS POT!!!!!

i just installed my double din, my scews lined up but had to play with the wires to get it right. here are some pics.

im looking for the power steering reservoir cap that has the plug connected to it. without it plugged your 4ws light goes on.

looking for a kensington grey front and rear aero kit thats in great shape.

looking for the double din radio trim for my vr4!!!!!

im in skokie, il

looking for a 23 spline t-case thats in good shape and doesnt grind when shifting or leaks.

ok, i had an idle surge problem for a couple years until last October. Sometimes it would surge, other times it would be fine. Check your wires by your temperature sensor. I found out that the wires that went to the temperature sensor were corroded and sometimes it will have a good connection...

does anybody know any site to where i can get a fuel tank filler hose besides the dealer?

ok, heres the situation im having. when i start the car sometimes it cranks right up no problem and sometimes it wont crank at all. I'll turn the key 3 or 4 times before it will crank over and start. Last weekend i was driving and because i have 272 cams and my car idles up and down my car...

I have polk audio 4inch speakers in the dash and 6 1/2 polk momo component sets in the front door and in the rear.

i dont know if this has anything to do with the idle problem but did u install the clutchwire with the chip? Also i had sort of the same problem, but i had an exhaust leak that was causing my oxygen sensor to go bad and causing my idle issues. just throwing it out there!!!

ok, i guess i should get the right throttle body. Does anybody have one?

I looked at pics of other throttle body's that have the closed throttle switch but i don't have one on mine. Do i have a different throttle body or a different year throttle body? Do i actually need one? Here are some pics of mine. Also i found the plug wire tied up.

hey, i fixed the problem this weekend. It ended up being the clutch wire. The clutch wire had a bad connection at the ecu. Thanks for all the suggestions.

isc motor-changed coolant temp sensor-changed im having the same problem. Does anybody know how much a closed throttle switch costs and where i can get one? Also how do i check to see if my coil pack is any good.

where did u get the bracket that holds the coils?

does anyone who uses the msd coil packs have pics of where they mounted them at?

does anyone know how much the isc costs at the dealer?

does anyone have a picture of where the idle-closed switch is located?

i tested the isc and it said on vfaq that it should read 28-33 ohms but when i did mine it read 38-40 ohms. Is that ok or is that bad?

I bought a volt tester, can someone send me a link where I can find out how to test my iac motor?

r u talking about the iac?

whats the idle-closed switch?

changed the coolant temp sensor, but that didnt work. maybe change the iac motor next, what do u think? any other suggestions?

Ok, i was able to move the car in the garage. the way i did so it wouldnt die on me is i turned the wheel towards the street, put it in 1st gear and tried to start it. while trying to start it released the clutch really quick before it died and took off because it was in gear, but it will still...