Thanks for checking.Anyone else?

Awesome. Thanks, man!Blessings,Ben

Anyone?

Looking for the e-brake bracket/arm/elbow that attaches to a right (passenger) rear brake caliper.I recently replaced the caliper and returned my core with that bracket still attached, not realizing the new one didn't have it until it was too late... The truck had already taken the core away...

Ok, so - great stuff! Thank you everyone for your replies.Yes, I do have the stock brake lines.Here's where I'm at. I honestly don't have a lot of time to do extensive diagnostics up front. So, with limited time, I'm planning to replace all brake lines with stainless steel braided lines...

I have replaced my right rear caliper about once per year for the past 3-4 years.What could be causing this?- Bad brake lines? - e-brake cable issue?Secondly, should I replace it with a $90 one from Advance or is there an equally effective alternative?

Got the charcoal can as described for a decent price. Good communication. Satisfied with the transaction! Would do business with again.

Ok, cool. I guess I misinterpreted the image in the Setups, believing that the catch-can was the kind of vented catch can you see everywhere and not one that is sealed.

So, I've already read the DSM Tuners article. When it shows "Setup 1" for example, and it shows a "catch can" with an In/Out between the valve cover breather and the intake, is that a SEALED catch can? ie one that is not vented to the atmosphere with a filter?If I run a hose directly from...

I reinstalled my PCV system, because ever since I had some oil leaks repaired around the oil filter housing/cooler, my dipstick has been popping out under the littlest amount of boost pressure.I thought it could be due to the fact that since positive crank case pressure is no longer leaking...

Got my part for a good price. Thanks, dude!

Yeah, basically I'm trying to be completely state-inspection compliant, which references having emissions hardware intact/not removed. Thus my search for a charcoal can. Yeah, I figured I would need T's and vac line, but I can get that just about anywhere.I still need a charcoal can!I...

Looking for a charcoal canister and all associated parts and hoses. Looking for the stock/factory one, as I'm not aware that an aftermarket one exists. (Routing diagrams would be helpful, as I don't remember what the thing was connected to or how).Also interested in a JMFabrications-like...

WTB: Bosch Alternator & AC Compressor.Email [email protected] for fastest response.

Looking to buy a working AC compressor. Let me know what you have. Shooting me a quick email to: [email protected] is the fastest way to contact me. It goes directly to my phone.Tips on where to buy this part for less are appreciated as well. Thanks!Ben

Quoting fastasleep: Can someone absolutely confirm the correct Bosch alternator part number for our vehicles?Anyone?

Nah, I'm able to get the Mitsubishi part number for our Galant VR-4 alternator. The issue I'm having is finding the corresponding Bosch alternator part number for our vehicles.

Can someone absolutely confirm the correct Bosch alternator part number for our vehicles?

I want to do this now, but I have a custom intake pipe that doesn't have an inlet/outlet for the valve cover vent to connect to.Would it be better for me to at least reconnect the PCV with the IM so that I have a vacuum source to draw out crank case gases at idle, and leave the VC venting to...

I might be losing around 3 quarts every 3-5k miles

Quoting prove_it: How old is the engine, what kind of mods do you have, how much oil does it consume?The motor is factory from '91. It was bone stock with 64k miles on it when I got it from my grandfather in 2005.It now has a little over 148k. It's been my daily driver since then. I...

The dealership wants $298.17 including the $20.00 core charge.NAPA wants $129.00 for a remanufactured one and $189.00 for a Bosch one, which includes the $65.00 core charge. - but you're saying I shouldn't settle for anything less than OEM or a rebuilt OEM?A rebuild isn't really possible...

There appears to be oil residue on the exhaust manifold near where the manifold meets the head. By residue, I mean it looks like oil is blowing by/leaking and catching dust/particulate.At idle I've noticed some nice plumes/clouds of smoke, especially at take off, every once in a while. The...

Thanks for the feedback guys. I will order an OEM one from the dealership tomorrow.Blessings,Ben

What is a voltage regulator? Is that a part of the alternator?

Over the past couple of months my car has started doing something that it has never done before as long as I have owned it.I have a voltage gauge on my A-pillar. I was driving around town a few months ago and all of a sudden, my voltage went from ~14.4 to 18+ for a few seconds. It may have...

Hi,I need a nice (preferably adjustable) blow-off valve. I would like an APS, but I was told they don't make them anymore, so they could be harder to come by.I have had an HKS, 1G Forge, crushed 1G, and currently have an Evo 9/10 bov and I've had compressor surge on all of them. I think it...

Still in the market.

I got a clutch! Thanks

I bought a clutch off Adam about a week ago. He emailed me quite good quality photos of it, gave me a great price on a clutch that looked like new and so far it feels great in the car. I needed it quickly and he was able to get it shipped out when I needed it so that I could have my car back...

PM's sent. Nothing finalized yet - still in need of a clutch.

My SBR (Slowboy Racing) 3500 popped a spring after 6 years, 60k miles, so I need a new clutch. Looking to get something like an ACT 2100, 2600, or something comparable to it.I will definitely consider used if in decent condition.Easiest way to get a hold of me is email: [email protected]...

Quoting kooter: how much would you sell the one you have for ? I am getting to rebuild a 14b and a big 16g for the first time would love the extra practice.I'm not sure yet. I won't know exactly what kind of shape it's in until I remove it. And I won't remove it until I have the new one...

Still looking. Just sayin'

Pictures?

Hey Peeps,Looking for an Evo3 Big 16G. Will consider small/big 16G's also depending on condition and price. Looking for one in great condition to replace my current Evo3 Big 16G that has what appears to be increasing shaft play.If you have any suggestions for who is a reputable turbo...

Thanks, guys. I ordered the one from JNZ.Josh at JNZ had this to say,"The current shift forks are quite a bit stronger then the original that came with the car.After people were having issues with the originals breaking, Mitsubishi issued a redesigned fork under a new part number.The...

Thanks Jeff,I assume Galant VR-4 clutch forks are the same as 1G Eclipses?Is the JNZ clutch fork cast like the OEM fork? If so, I would spend the $90 on the forged Competition Clutch fork if they are still available (I don't see them listed on their site, but from a recent DSM Talk thread...

So, I think the clutch fork is broken.My friend came and pushed the slave cylinder rod, which pushed fluid back up into the master cylinder (it looked empty). He didn't seem to think the fork should move as freely as it is moving.All signs seem to point to the clutch fork. I assume it...

Hello friends,I pulled out of a parking spot today and as I depressed the clutch pedal from first gear to stop at a stop sign, I heard a snap/pop sound and the clutch hit the floor.A friend helped me push it back into a parking spot.Here's the first assessment:I cannot find any leaking...

Justin, thanks for the link, but I was talking about the exterior trim! Sorry, I didn't clarify that.Any links to how to prep it properly? Thank you for the responses.

What are my options for restoring the fading door trip that frames the top portion of the doors around the car windows?Thanks for your help in advance.Ben

Hey guys,What are the tolerances for the ABS Sensor on the front passenger side? I've moved the thing near and far by sight a few times and my ABS still kicks in when it shouldn't, so I may have the opportunity for a shop to set it accurately. I just need to know the range/tolerance...

Like the title says, I'm looking for a good condition nile black hood and front passenger fender. Let me know what you've got. Thanks,Ben

That's pretty sick...

Thank you!However, the ABS light remains on (ABS fuse removed and connector by the PS pump is unplugged)...I suppose disconnecting the bulb is my last resort, save unplugging the control unit in the trunk.Does anyone have the How To link handy for gauge cluster removal?(ps. I...

Is there a trick to removing the foremost ABS fuse from the cluster on the (+) batt. terminal? That thing does not want to come out..

I've had the middle plug unplugged, which is why my ABS light is on in the first place. I'll give the fuse method a shot.

Can anyone confirm or deny that removing the ABS computer from the trunk will turn the ABS light off?

Hmmm, I guess I can't find it. I unplugged two things right around the antenna and the ABS light remained on. Anybody got a pic?