If you recently purchased 741/2000 hit me up on IG @iggy.thunderstorm I’d love to give you some history on the car that the guy you bought it from might have forgotten. I owned it for about 3 years when I sold it to him this June. Also I’ve got a dealer shop manual I’d like to hand down to...

My 91 is for sale. Burns oil, leaks coolant, has high cold idle, driver’s exterior door handle is broken, left rear wheel bearing is junk, and the other night the alternator pulley seized, it threw the belt so no power steering either. I’ve replaced/upgraded all the rubber in the front...

Oh I must have read the badge wrong. Kinda hard to see from outside with the windows up. It. Was a single digit for sure tho.

I don't know if the owner of 3/1000 is a regular member or not, but I got some pics of our cars at Lake Superior Performace Rally yesterday thought I'd share. I was pretty excited to see another GVR-4, one reason I'm glad I don't have "just another WRX" my buddy was driving his 09 WRX hatch and...

741/2000 pics taken 10/0817

I figured the smaller one wasn't right, but when I took my turbo off I remember it having two gaskets. Which probably means whoever put it on last must have made the same mistake I almost made.

So do I just need the normal looking one?

I'm looking for the splashguard to goes in front of the front driver side wheel. mines long gone

I'm in the process of putting my turbo back on but the gasket kit that I have has a really weird looking gasket. One of them is centered in the same diameter as the manifold outlet , but the other one is smaller and offset. I'm pretty sure that's the one that goes on the turbo but is it normal...

He one is looking at is actually a hub assembly not just the bearing.

Are the rear wheel bearings on our cars the same as the FWD Galants? The Moog part is listed as fitting both, but I want to be sure before I drove 70 bucks, and wait 4 days for it to get here.

I'm looking for a new exhaust manifold, I'm keeping my stock turbo, but my manifold has is junk. Either tubular or cast I really don't care. Just let me know what you've got and the price. Thanks

Any one got a good condition battery tray. Mine looks like this.Swiss cheese.

I'll take that Black rear dog leg, and JDM grill. Never mind on the dogleg. No point in my getting a nice new one, when I'll probably loose it in the snow/mud again. I'll let some one who keeps their car clean have it.

My car needs a serious suspension refresh but I don't want to lower, and can't afford coilovers, at least not until next April and I want my car ready for winter fun. If you have new, or good condition OEM springs, or sifffer springs set up for stock hieght I'm interested.

I'm looking for new springs that are either OEM or stiffer/taller than stock. All I've been able to find are lowering srings, or people using EVO8 srings which have to be cut, and aren't exactly cheap either. I'm on a budget, and my car is currently sitting an inch lower than stock because my...

I'm considering rebuilding my stock TD05h. I don't feel the need to upgrade, at this point, mainly because I'd rather spend money on suspension, a good bucket seat, and a long list of other things that our 25 year old cars need. My question is do you guys have any suggestions of where to buy my...

I'm looking for suggestions for new springs, but I dint not want lowering springs. I' wouldn't mind going a bit stiffer then stock, but I like driving on old logging roads so lowering is not an option. In fact the main reason I'm replacing my springs is that my front end currently sits about an...

I didn't realize it was in two pieces,p, but it's the lower half that dangles.

I'm looking for an OEM Turbo heat shield, I'm not going to upgraded my turbo any time soon, and my existing heatshield is broken/ rusted away in several areas that should be bolt holes.

I'm trying to install my mechanical boost gauge right now, but I'm not sure which vacuum line to T into. I can't find an actual answer.

A ground for what?

Today went to replace my O2 sensor and was surprised to find a 5th wife in the loom before the 02 connector. I can't find the other half of it, but I'm guessing to goes some where? doesn't help that the insulation is gone.

First of all thanks for the very helpful reply. I really should have Don't more research, before I bought this replacement ECU, Also, what is an ISC? Idle speed control? Is that something on the throttlebody?

Yes I fact it turns over harder than it did before. I also noticed that with the key into the on position the check engine, and 4WS idiot lights do not light up. Also this ECU has a blow cap. I'm hoping the seller just accidental sent me the wrong one as it's also not in the same case as the one...

I was have lots of problems with my car and found that my ECU had melted itself. Picture here.I bought a replacement ECU and the sell who I'll leave nameless(I don't think this is their fault) said he had been running it on his GVR-4. But after installing it my car will not start at all. It...

I do want to learn to drive fast on low traction surfaces, dirt, grass, snow, But I also like a good bit of overstreer just for the fun of it.

I'm pretty sure every single AWD rally car driver still uses their handbrake to pitch the car into the turns.

Can I initiate oversteer with the hand brake with my VR-4? If I understand correctly I can as long as the clutch is engaged, but I don't want to brake anything locking the rear wheels without locking the front.

My car is having issues Idling when warmed up. When the car is cold it idles from 2000-2500RPM, but from what I understand that's somewhat normal for our cars. Once it's warmed up however Idle makes a drastic change to 5-700RPM and it's usually a rough idle at that. Here's the kicker tho, if...

Is anyone here going to LSPR 2015 in the U.P.? I'm planning on going and hopefully taking 741 there! If your going want to say hello maybe we can meet up.

Not my ad, just found it on CL figured I'd share it here. click

I didn't know that. Any idea of where I can find replacements?

I'm looking for a new low body trim piece. I only need the rear passenger side. one the same color would be awesome. as you can see all my clips have busted off. at least I know there's no rust back there!

a member on another forum said it could be the harmonic balance, and that they are a common point of failure on early 4g63s. Lets hope it's not the balance shaft. taking off the oil pan do not look fun.

Well I've only had the car two months and driven it a total of 30-40 miles. To my knowledge the only recent maintenance in that area was a new alternator, recent meaning since it taken out of storage this March. The power steering pump could be suspect as the steering does feel pretty heavy...

I've got a strange noise coming from my engine bay at Low RPMs. It seems to almost disappear at 21-2300PRM. It also comes back if you let RPMS drop quickly.I took a video of what's going on. I forgot to turn my radio off tho. I may redo it without the radio interference. click If any...

That suspension are you on?

the H&R springs are 1.5"- 1.8" drop.

I'm thinking about picking up some H&R lowering springs, mostly do to the price. My car needs an alignment anyway since I had to replace a tie rod end, so if I'm ever going to lower it now is the time. If I'm going to replace the springs I may as well replace the shock since they might be 25...

I need a Proportioning valve. Mines stuck shut. boo Also i'll take the shifter assembly if it's not too sloopy

So after replacing my rubber brake lines because one had blown, I wasn't getting any fluid to the rear wheels. The i decided to check the block on the fire wall that the lines run through, which I believe is the propositioning valve(tho I have no idea how it works.) I have fluid going into it...

So when I bought my GVR4 it had one blown rubber brake line. I decided since it's an older car I should just replace all the lines. So I replaced all the rubber lines with stainless lines from JNZ, I also replaced the front pads and rotors. Here's where everything got annoying. I went to bleed...

Isn't that the bushing for the shifter base?

I looked at JNZ and it seems they don't sell that bushing, and they make a short shifter buy it's like 200 bucks by the time you get them a 3000GT shifter, and ship it there ad back.

So the bushing in my shifter that the shifter itself hinges on is basically gone. I can't seem to find a replacement for it. Does any one know where I could find it? Also is the 1991-93 shifter the same as a 1G? I'm guessing it's the same but they 1G is shorter.Oh and is there a list on here...

Cool I just bought 741/2000 about a week ago

So I don't think any one makes a trailer hitch for our cars, but I had an idea. Basically my plan is to make a hitch that would bolt in between the two rear tow hooks. Now I'm not thinking this would tow much. Just a small utility trailer with a few bikes, or kayaks maybe some yard trimmings...

Thanks! Best price I've found by far.

So on of my flex lines blew and I'm thinking of replacing the lines with steel braided lines. Will a kit for a G1 DSM fit our cars?