Prices don't include shipping cost, local Seattle pickup available, also occasionally in the Portland area. Open to reasonable offers and discounting multiple items.Galant VR4 Socketed EPROM ECU ECMTuning repaired (A photos) - $200 UsedSOLD Used Turbo EPROM board, no case (from MD165810) (B...

Ended up going a different route with my radiator setup. Bought this used off of another member, worked well for the short time I used it, SPAL fan is awesome, slightly modified to fit past my BOV setup. Comes with the SPAL thru-radiator mounts.Fan Info: SPAL High Performance VA01-AP70/LL-36A...

I've had this a very long time and I will no longer be using it. It's pretty rough shape and priced as such. There are a few missing rubber trim/boots and 1 missing cover plate for when you remove the rack. I always just put the OEM gutter covers back in when I wasn't using the rack, so I never...

New AMG Replica Grill - $40+shipping BNIB, still in the packaging it was shipped in, just decided on a different grill. Picture: Click Ebay: Ebay Ad Info

This is the Build Thread for 254/2000. Reply below.

Selling a set of 4 used black Enkei RPF1 rims for $800Size: 17x8 Offset: +35mm Backspacing: 5.79" Bolt Pattern: 5-114 Weight: 16 lbs.In great condition with installed 949 Racing valve stems in matching black. Currently have bald RE71Rs on them that were used for autocross. You will need to...

Finally swapped to a 4 bolt, so selling my 3 bolt LSD and axles. Ran only Lightweight Shockproof while I owned it, it sounded fine and performed well, but it is used with unknown mileage. Bolts right up for anyone with the stock non-LSD setup, but I do have cups available if you need them.$100...

Bought a few used/new parts and was quick on the communication and payment. Easy to work with!

Looking for a good front right fender that I can pick up in Washington or Oregon preferably. Any color is fine, I don't mind repainting it. Just not looking for anything with a lot of rust or damage/bends.I have a set of beat up JDM fenders I will be parting with once I have the front right...

Does anyone have suggestions on removing these without destroying? While removing the damper both bushings came out of the damper and left the lower metal bushing that is stuck and integrated rubber bushing behind.I could of course cut them off, but there's nothing wrong with the performance...

Cleaning out my garage, will add parts as I can...Have a lot of parts, prices include paypal fees, but not shipping. Open to reasonable offers and package deals.Good Guy Thread for Reference: ClickPart 3: NGK BPR6EIX Iridium Spark Plugs - $10 Click1 CM (Certified Muffler) 3" Cat Delete...

These cars are getting fewer all the time, so before I toss something someone might want, I wanted to check if anyone wants a used ABS unit or the front/engine bay lines.ABS was disabled before I owned it, so no idea if it works, therefore I'd consider it for parts only. Same for the ABS...

Looking for a good, not rusted out fuel tank, don't need the sending unit.Not in a hurry, but since mine is in pretty rough shape, I thought I'd start the search now.Prefer to pick it up if its in the PNW, but open to discussing shipping, though I'd imagine freight would be the only way to...

Bought some A/C parts from me, was communicative throughout and quick on the payment. Everything you want to get from a buyer!

Selling a good condition JDM grill. Has one clip that is still hanging on and might be repairable (see last photo), all others are still there.$100 OBO shipped. Sold!Edit 3/30: price drop, make offers

Edit: Found it!Looking for a good condition 90 Turbo Water pipe.Thanks.

Have some free parts:Picked up! -AC Parts, see picture, only item not pictured is the compressor bracket Note: AC has not worked on the car for about 8 years, was disconnected due to a bad compressor bearing, most AC parts had good seals and a little oil when pulledGone! -OEM fan...

Going a different route, so selling this unopened EXEDY 05048 OEM replacement clutch kit. Paid $120+shipping, asking for $80+shipping.Thank you.

Edit: Found a good used one, but always open to any new units.The goo in mine is melted out and its super sensitive, time to replace it.Would like to get a brand new OEM sensor or a known good working sensor. Not interested in an aftermarket sensor for the time being.Thank you.

Looking for the cross member that goes under the oil pan in good condition, mine has seen quite a few hits on the ground apparently. This is the "left center" cross member in most of the parts catalogs. Connects between the front sub-frame (near steering rack) and the front cross member(near the...

Looking for a manual 4-bolt LSD, preferably with axles and cups in decent or better condition.Thanks.

TL;DR at the bottom.So, I had a caliper lock up earlier this year in the rear and decided to replace both rear calipers. They were very old and worn out and both had seized parking brake mechanisms (of course). So, I managed to source both sides rebuilt and had new parking brake cables...

SOLDChanged to a different wideband solution, this worked fine when pulled, though a new sensor may be a good idea. You'll want to go over all of the connections and wiring as this was basically just clipped off the harness.Includes: LC-1 unit Used Bosch sensor Display gauge Led...

Please contact via PM for paypal and shipping cost.SOLD! JDM Keyless Fuel Door - $50 OBO Paint is in pretty good condition, shipped from Japan. Note it is JDM Sofia (?) white, not summit white, though they are close in color.Used Innovate LC-1 wideband O2 and DB...

Used Galant VR-4 Seats (Pair) - $150 OBO Picked Up Been in the car since I have owned it, probably the originals. The leather is still pretty soft, but they show the signs of wear from 238K miles and 26 years of use. That said, the backs look pretty great and the driver bolster and the...

Removing my A/C, need the duct that connects the blower to the heater core housing. Part no. MB568566, found on non-A/C Galant and 91-96 3000gt without A/C.#7 in the image attachedThanks.

Mine is starting to lose shape and has some tears. Looking to buy one with or without glass that sits flush and is in good condition all the way around.And, if you have a brand new one, even better! PM your priceThanks.

Looking for a JDM Keyless Fuel Door in any color.Thanks.

Update 8/13: Lug nuts on eBay. I'd really like to get rid of stuff... Make some offers!Cleaning out some parts I've collected over the years in order to focus in on the updates and mods I'm actually going to do. Most stuff purchased from people on the board, and a lot of it has been sitting...

Just got a pair of the Depo reproduction amber corners, but I realized after getting them in my hands that the plugs are different from the stock USDM running light corners. I tried searching, but I couldn't find a mention of this issue. I found some info on converting them to turn signals...

I know this is a longshot, but if you have, or know someone, with terrible looking evo seats, but good lower frames and sliders, I need those parts.I may post the long story later, but the gist is, I'm out quite a bit of money on a set of seats I bought that turned out to be severely bent in...

I'm selling a heavily used Whiteline front strut tower bar that I bought from a member on here a few years back. I bought it without pictures and was surprised (not happily) at the condition when it arrived, so please look closely before you purchase. It has the seemingly typical Whiteline...

Decided to go a different direction, bought from a member on here, holder is in good condition, but does have a small break at one of the bolt holes.Price is $65 shipped CONUS OBO SOLDThanks.

All prices shipped. Please contact via PM. Edit: Remainders moved to eBay, feel free to contact me with offers for non-auction itemsSummit white gas door with provision for lock *used* - $15 obo EBAY LINK A little dirty inside and out ImageOmori Mechanical oil pressure gauge...

Hoping some of you with more experience can provide some insight and help me learn a little about camshafts and typical/atypical wear. I've seen severely pitted camshafts and understand those can't really be used, but never seen cams with minor issues.I purchased a set of cams recently and...

Looking to get a set of front Tein Pillowball Upper Mounts (Camber Plates).Thanks.

Probably a longshot, but figured I'd see if anyone has a set in good condition (no scoring/pitting) they are willing to sell.Edited: found a 264 set, looking for a HKS 272 exhaust cam if anyone has one.Thanks.

Did some work under the car recently and was inspecting things for future work, one of which was installing torque solutions carrier bearing driveshaft bushings. Looking at the rear most passenger carrier bearing mount I found this gem:I've had this car for about 70k miles, so I guess it...

So, I've got a leak in the heater core and started the process to replace it, but I've hit a roadblock. Hoping some of you who are experienced here can help me with the next steps since a lot of the writeups (and the FSM) don't really describe it well. I searched quite a bit and use a few posts...

Just looking for a stock steering wheel and injectors in good shape. Please PM or email me with pics and a price.Thanks! [email protected]

Looking for a good working wiper relay, or a few of them to test and see if they workPM me with price if you have one!Thanks, Shamus

[SOLD]$195 Shipped in the lower 48. Putting new seats in the car isn't a priority, so I'm selling these off, still in the box they came in. If you need pictures I'll get some, here is the original thread for reference click .Edit: Now SOLD.

For sale is a South Bend Clutch Heavy Duty TZ/B-Series Clutch, SS Pressure Plate and Fidanza Aluminum Flywheel. They are technically used with less than 5 miles on them.Why I'm selling: Basically, I bought this kit and asked a local mechanic to put it in with the Fidanza flywheel. Once in...

So I was re-assembling my exhaust manifold after the turbo was rebuilt. I had a bunch of trouble with one stud going in all the way. I stupidly went to put the nut on instead of trying to find another solution and stripped the threads out of the head.Now here is my question:I am now...

Went down to his place to get a strut tower bar and came home with a few other things all at great prices. He's a great guy and was really a pleasure to talk to and buy from. Thanks!

So I have a brand new Evo III manifold that has been hanging around for quite a while waiting to go on the car and I'm finally going to put it on. I was hoping some of you guys can answer some questions for me.-Does anyone here do porting work on exhaust manifolds, or know someone good who...

The "plates" or "plugs" that keep water from going into the vents on a JDM hood. I would like to buy a set, thanks. -shamus

So I've been noticing the last few rainy days that when I open CF JDM vented hood that it has water pooling in it. I know it is because of the area around the vents where the skeleton (bottom portion) of the hood meets the top skin of the hood. There is a gap between the two, but they are held...

I sheared the bolt on my parking brake's "handle cable," the one that is under the console. The cable is held to the handle with a pin, and the other end is a bolt/pin assembly connecting to the two rearward cables. If someone has a parted out car or any galant chassis sitting around I really...

So my dash coolant temperature goes to full hot as soon as it has power, all I want to know is which sensor on the t-stat housing is it that tells the dash the temperature. Is it the top one or the front/bottom one? thanks.