Good morning. I don’t have a trunk lid at this time.

You sure can. Please text me at: (910) 689-6150. Thank you.

Good morning. Semi-quarterly bump. Plenty of stock parts are available. Feel free to reach out to me directly at: (910) 689-6150.Thank you for looking.

...Sequential Blow Off Valve kit for the e39a and e38a galant. My price is $265.00 shipped to your door via USPS for CONUS based transactions only.*This kit is more of a decorative piece than a performance option for your galant as the Blow Off Valve is made of plastic...

FS is a used 1g/gvr4 Water Pipe for $65.00 shipped to your door via USPS.If interested please PM. I accept payment via PayPal to: [email protected] you for looking.

No fenders.

Good afternoon. Sorry to hear the bad news. I should have what your looking for. Please text/call: (910) 689-6150.

I’m currently out of hoods.

I'm afraid I'm currently out of fenders.

Bump plenty of stock parts available.

patadelhelm,Good morning. I’m afraid I don’t have one at this time.-pot

Yes it is available.

I dont.

...a part out for the following vehicle:- 1991 Galant vr4 badge number 560/2000 - VIN: Unknown - Model: E39ASNPFL2M - Color, Interior Option: X68*All parts prices include PayPal fees and shipping costs for CONUS based transactions. I accept all payments via PayPal to: [email protected]...

...vehicle:- 1991 Galant vr4 badge number 1335/2000 with 216,909 miles - VIN: JA3CX56U4MZA010336 - Model: E39ASNPFL2M - Color, Interior Option: X68*All parts prices include PayPal fees and shipping costs for CONUS based transactions. I accept all payments via PayPal to...

PM sent.

I used to own no 893 (I think that was the correct no). It was a non-sunroof KG. I don’t remember anything about the audio features as I suspect they were aftermarket.Had I known how much a sun roof weighs on these cars to include the rarity of this variant, I very well would have kept it...

Here are two images of the stock galant vr4 floor mats. They have a green/gray color scheme with Mitsubishi as the only text.The two rear floor mats are unique to each side. *I spilled a gallon of paint on the front passenger side so I don’t have an image of that one.

Dave thanks for contributing to this discussion. I still haven’t been able to release the terminal on this connector and it is making me damn near insane.To be sure, are you stating that this connector is a double locking pin type? If so, will this tool on the right do the trick? Or when...

John as is typical of you, the insight and background knowledge you provide proves incredible time and time again. Thank you for the feedback and praise.I think there are far better techs on this forum especially in the electrical realm, but I’ll do my best to do a write up on removal of the...

...earlier, but I’ve spent the better part of the week unsuccessfully trying to remove this circuit with the single bladed terminal removal tool. *The same tool I’ve used for every circuit on this harness.In this particular case, on connector A-08, and out of desperation, I removed a grey...

...proving difficult to remove. Gr connects directly to A-08 (front wiring harness and control air inf harness combination) please see first image.* I’m having a difficult time removing this circuit. In short, should I be using the terminal removal tool on the left or right? Please see...

This is the Build Thread for 182. Reply below.

Bump. Plenty of stock parts still available.

...I believe.In addition, there is a TSB on performing the rear alignment on our rigs and that of the 3000gt vr4. Please see link below:TSB*The technician must adhere to this TSB otherwise the rear alignment will not be correct. Should you have any additional questions please continue...

PM sent.

Bump, plenty of parts still available.

...via USPS Standard Mail and I accept payment via PayPal to: [email protected]. For questions please PM or contact me at: (910) 689-6150.**All prices include PayPal & Shipping charges**1. J-Pipe $40.002. Transmission Mount & Bracket $35.003. Front Engine Bracket...

...2. 3 Bolt Differential 3. Rusty Gas Tank 4. Rear Bumper 5. Bumper Lights 6. Rear Trunk 7. Rear 4 Lug 8. Rear Trunk Harness 9. Interior Harness *Hacker per comment above 10. Chassis Harness *Hacked per comment above 11. Starter Harness *Hacked per comment above 12. Front Mount Intercooler...

There is a board member who makes custom piping and kits for our cars. He hasn’t logged in for some time but maybe you can track him down:Intercooler Kit

PM sent.

I don’t have a full set but the handles I do have are in satisfactory condition with no plastic peeling off.What side are you looking for and how many?

I’ve been following Natfab’s work over on Instagram for quite some time and am really excited to see his rear subframe assembly. It is a gorgeous piece!Nathan was even kind enough to provide TIG welding tips. I’m really impressed with the attention to detail and quality of his craftsmanship...

...notes I will add before you begin to push upward, you need to begin by prying preferably with a plastic trim tool outward starting at the bottom.*There are three or four black plastic squarish tabs that the door card must clear which can only be accomplished by prying out outward first...

Thank you! This is a huge help.

That is one helluva survivor -good luck with sale! Awesome that your offering this.

Good evening gents. Hope someone here could give a me hand here and identify what this part is. It is part no MB82356:Appreciate any help anyone can provide. Thank you.

Bob, I’m afraid I do not.

Good evening Jake. I’m no expert on this matter however the Thermo Sensor you have pictured seems to be OEM Mitsubishi for a USDM galant vr4.For reference my sensor (from a ‘91 model) has the following etched into the sensor: 7K 21 85M ND (with a circle) on each face of the six faced sides...

Good morning. I’m afraid I only have available what’s pictured in my four FS threads.

Charles I just watched your YouTube video of your NOS Momo Wheel and matching Shift Knob -speechles:ONice hard, deliberate, and meticulous work on your part. I’m continuing to follow. Thanks again as always for sharing.

PM sent.

Wow.....The legendary Jafro is alive and well and a member of this board. That’s what I’m talking about.I haven’t seen any new videos in years. Are you still posting? What are you up to these days?

Hi Sam! Welcome to the galant board. I have attached a link below to give you a general idea of what the process will look like to convert your existing suspension to an Evo XVIII - XIV MR suspension. Please see here:There is plenty of useful information on this board dealing with this...

PM sent.

PM sent.

Got it. I’ll be sure to assist with this effort. I’d like to Also get a head start and compete for the month of October <img src="/ubbthreads/images/graemlins/grin.gif" alt="" />

omas stayed exactly what he was looking for. He paid promptly and acknowledged receipt of his package.I couldn’t have asked for a smoother transaction with Thomas and I can assure other galant members will have a similar experience.Thank you Thomas for your business!

Anyone? Need Rear Driver Dogleg soon as possible. Preferably in Summit White.