Front spindles and brake rotors
Rear spindles and brake rotors
Must be from an AWD car.
Must be from an AWD/ABS car if you want to keep the ABS working.
Front rotors must be from a big brake car, or buy new ones.
Edited by lunchbox (05/01/06 05:46 PM)
Posts: 1140 | From: Mil-walk-it-out, WI | Member Since: 05/29/05 | IP: (22.214.171.124) |
strokin4dr fighting them with a large needle 1280/2000 1135/2000
posted 05/01/06 09:01 PM
The front spindles can be from any TEL, not just the awd models. You have to use your stock knuckles and just press in the TEL spindles w/ new bearings. This is of course if you do not care to keep your abs .
1908- sold and missed.
1280- 2.3, FP 35R, E85, etc.
1135- 100% stock
'93 Mirage hatch- 4g63, AWD, etc (hoarding for build)
Posts: 2767 | From: Savannah, GA | Member Since: 08/30/05 | IP: (126.96.36.199) |
posted 05/01/06 10:25 PM
the car already doesnt have abs so it doesnt matter. so i need the front and rear spindles from an awd t/e/l, or the fronts can be from a non awd? the calipers and harware are universal i assume?