Lancer99
Well-known member
I have a small 16g that I want to rebuild. Which kit do I get? 16g or 14b? or a tdo5? There's so many out there I don't want to get the wrong one.
The Top Mitsubishi Galant VR-4 Resource
Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.
- Software Upgraded - Reset Your Password to Login
In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.
Turbo rebuild Kits
- Thread starterLancer99
- Start date
GSTwithPSI
Well-known member
prove_it
Well-known member
Small 16G is a superback wheel. You'll need the most common rebuild kit for the TD05 16g,18g,20g.
If your rebuilding it, plan on a new compressor wheel or a balance. It's hard to keep the balance right.
If your rebuilding it, plan on a new compressor wheel or a balance. It's hard to keep the balance right.
FlyingEagle
Staff member
I bought a kit from Trader Greg, but have yet to install it.
This is what was recommended to me, by guys here on the forums that have been around.
TraderGreg.ecrater.com
This is what was recommended to me, by guys here on the forums that have been around.
TraderGreg.ecrater.com
FlyingEagle
Staff member
Genuine MHI turbo shafts have bushings that contain a smaller internal diameter , than the China Bay shafts. Be aware of what turbo you have, and you won't mix up kits.
This is what happened to me, and as a result, sent in my old Mitsu center section to confirm this part difference.
China Bay rebuild kit disclaimer!
This is what happened to me, and as a result, sent in my old Mitsu center section to confirm this part difference.
China Bay rebuild kit disclaimer!
Last edited:
