cody
Well-known member
Hi guys, been out of the game for a few years. I bought a 92 Talon with a blown motor. I pulled the motor and rebuilt it. Now its back in and there's something wrong. The car starts and idles really rough, to the point where I need to tap the throttle to keep it running. When I tap the throttle the slightest bit it revs up pretty high (reving it from the engine so not sure on the rpm but probably around 4k). There was a really strange clicking sound coming from the throttle body area, I could feel it while holding the intercooler pipe; almost like the butterfly was loose and snapping back and forth. I took off the upper intercooler pipe and the idle calmed down and it ran by itself at a steady rpm. When the engine was rebuilt, all the sensors and bolt on parts were reused with the exception of the injectors. I was missing one so I got a set from a friend who said they were from a 2g. Any ideas where to start looking to resolve this problem and get the car under control would be much appreciated.