pot
Staff member
I just wanted to share a picture of the aluminum rear battery tray Justin (EMX5636) fabricated for me. I wrote a "Good Guy" post depicting the dedication and effort Justin made toward helping me fulfill my goal. But words cannot truly describe how incredible he is in both spirit and craftsmanship. I seriously think he's been holding out on the board with his aluminum welding/fabrication skills <img src="/ubbthreads/images/graemlins/devil.gif" alt="" />
This is how we started…..
This is how the mount sits….
I was going to do a battery relocation "How to…" for the archives but with two writeup's already, I didn't want to pollute the already good collection of information. For good measure, I pulled Hertz's via Blacksheep's and Lofty's two posts and went to town on the relocation. In terms of material and tools I used the following:
<b>Tools</b>
- Channel Locks (Sears)
- Carpet Trim Removal Tool (Harbor Freight)
- 3/8 wratchet 10/12mm shallow socket
<b>Materials</b>
- Odyssey PC680MJT-A $137.67 (www.odyssey.com)
- 2 gauge Welding Cable x 17ft (Red Ball Electric) *15 1/2ft for positive $33.32 @ $1.96ft
- 4 Cable Terminal Ends (NAPA) $9.00
<b>Total Price</b> $179.99
Again, I just wanted to share my battery relocation project and take an opportunity to show off Justin's craftsmanship. Thanks again brother.
This is how we started…..
This is how the mount sits….
I was going to do a battery relocation "How to…" for the archives but with two writeup's already, I didn't want to pollute the already good collection of information. For good measure, I pulled Hertz's via Blacksheep's and Lofty's two posts and went to town on the relocation. In terms of material and tools I used the following:
<b>Tools</b>
- Channel Locks (Sears)
- Carpet Trim Removal Tool (Harbor Freight)
- 3/8 wratchet 10/12mm shallow socket
<b>Materials</b>
- Odyssey PC680MJT-A $137.67 (www.odyssey.com)
- 2 gauge Welding Cable x 17ft (Red Ball Electric) *15 1/2ft for positive $33.32 @ $1.96ft
- 4 Cable Terminal Ends (NAPA) $9.00
<b>Total Price</b> $179.99
Again, I just wanted to share my battery relocation project and take an opportunity to show off Justin's craftsmanship. Thanks again brother.
Last edited: