Scott Y
Well-known member
I've been looking at the pics in the Alarm Disable How-To, and I can't make sense of it. It looks like the wiring harness is routed differently on the example car than on mine.
Basically, the only yellow w/blue stripe wire I can find is connected to the module above the cruise control unit. This sounds right according to the how-to, but the harness sourcing the wire isn't down low like it shows in the pics. I've taken a pic of what mine looks like. I've removed the connector for the cruise unit, and taken the 10mm nut off the bottom of the fusebox bracket to allow more finger room.
Have I got the right wire?
---having trouble uploading pic, will try again shortly---
Basically, the only yellow w/blue stripe wire I can find is connected to the module above the cruise control unit. This sounds right according to the how-to, but the harness sourcing the wire isn't down low like it shows in the pics. I've taken a pic of what mine looks like. I've removed the connector for the cruise unit, and taken the 10mm nut off the bottom of the fusebox bracket to allow more finger room.
Have I got the right wire?
---having trouble uploading pic, will try again shortly---