Ralli380Gvr4
Well-known member
I'm in for one.
The Top Mitsubishi Galant VR-4 Resource
Join the best E39A 1991-1992 Mitsubishi Galant VR-4 community and document your GVR4 journey.
- Software Upgraded - Reset Your Password to Login
In order to log in after the forum software change, you need to reset your password. If you don't have access to the email address you used to register your GVR4.org account, you won't be able to reset your password. In that case, follow the instructions here to regain access to the forum.
Harness Bar! ONLY ONE LEFT AT $165 plus shipping - plus paypal fees
- Thread startertinkolby_25
- Start date
- Status
Brunoboy
Well-known member
So whats up then? GB? Bump bump
Boostdtalon
Well-known member
I wonder if an Evo 8-9 harness bar would fit?
Diego
Well-known member
I never heard anything back from him...
^^ I asked if a E8 bar would work before one time, no one ever answered. I'm sure it should but really its just measuring pillar to pillar.
^^ I asked if a E8 bar would work before one time, no one ever answered. I'm sure it should but really its just measuring pillar to pillar.
Brunoboy
Well-known member
True if you measure the distance from side to side . Some bars are universal.
-shane
-shane
Boostdtalon
Well-known member
Yeah I asked a buddy to take measurements on his Evo 8 since he has a harness bar. I'll put up the info when I hear back from him.
Galantvr41062
Well-known member
I will try to have a prototype of a harness bar using 1 3/4" od .083 chrome moly by this weekend. I will post pics and PM a est price to those who would want one.
~John
~John
Brunoboy
Well-known member
yes please, pics would be nice installed as well.
-Shane
-Shane
Tre3zy
Well-known member
Quoting GalantVR41062:
I will try to have a prototype of a harness bar using 1 3/4" od .083 chrome moly by this weekend. I will post pics and PM a est price to those who would want one.
~John
cool.... let us know
I will try to have a prototype of a harness bar using 1 3/4" od .083 chrome moly by this weekend. I will post pics and PM a est price to those who would want one.
~John
cool.... let us know
Diego
Well-known member
Quoting GalantVR41062:
I could make one, just tell me where you want it to bolt onto.
Prototype should be done by the weekend.... as GalantVR41062 has pm*d me.
I could make one, just tell me where you want it to bolt onto.
Prototype should be done by the weekend.... as GalantVR41062 has pm*d me.
grocery_getter
Well-known member
I actually have a 3 speed harness bar sitting here. I was going to use it to make more duplicates, as I've cleared this with Harry. However judging by how cheap everyone on this list is these days, and the cost of material and hourly labor to make these bars and shipping and the consequence of having 90% of the 'I want one!' crowd backing out AFTER the bar is made and AFTER the labor is expensed, I had to sit on that idea.
Last edited:
dustyduff
Well-known member
I'd still be interested in one if somebody decides to fabricate one. If it was just like the threespeed one. Understandably, most people probably back out, but I'm serious. If you decide to get rid of the one you have grocery_getter, let me know via pm.
The jig we made up for the harness bar was accidently scrapped years ago.
If someone would send me one of the bars we made I will make a new jig and have more made pretty quickly. I still have the templates for the plates that bolt it to the car.
If someone would send me one of the bars we made I will make a new jig and have more made pretty quickly. I still have the templates for the plates that bolt it to the car.
JSchleim18
Well-known member
IN!
And I'm gonna see if a friend of mine can send you the bar
And I'm gonna see if a friend of mine can send you the bar
Brunoboy
Well-known member
Quoting number3:
The jig we made up for the harness bar was accidently scrapped years ago.
If someone would send me one of the bars we made I will make a new jig and have more made pretty quickly. I still have the templates for the plates that bolt it to the car.
I knew someone had made em, aha
The jig we made up for the harness bar was accidently scrapped years ago.
If someone would send me one of the bars we made I will make a new jig and have more made pretty quickly. I still have the templates for the plates that bolt it to the car.
I knew someone had made em, aha
Brunoboy
Well-known member
Correct me if im wrong, but isnt a harness bar supposed to be higher than that? I mean harness are supposed to be at 45 degrees?
JSchleim18
Well-known member
Spoke to my buddy. He can drop it off to Harry next week if that's ok with Harry.
Please anyone with interest reply in this thread because he doesn't want to take it off unless there's interest and no flakers!
Please anyone with interest reply in this thread because he doesn't want to take it off unless there's interest and no flakers!
Tre3zy
Well-known member
hey harry how much you think this would cost? if its around 250 then im in....
turbowop
Well-known member
Quoting brunoboy:
Correct me if im wrong, but isnt a harness bar supposed to be higher than that? I mean harness are supposed to be at 45 degrees?
The pics way up in the first couple posts are of my car. The harnesses are pretty much level with my shoulders. I think the bar is spot-on as far as placement.
Correct me if im wrong, but isnt a harness bar supposed to be higher than that? I mean harness are supposed to be at 45 degrees?
The pics way up in the first couple posts are of my car. The harnesses are pretty much level with my shoulders. I think the bar is spot-on as far as placement.
- Status
