I've had trouble in the past with other cars (I don't really know how to press them in), so I pulled the spindles off and took them to a shop to have them pressed in. There is a lot of rust and I am having a lot of trouble getting the trailing arm eccentric bolts off (broke a 3/8 breaker bar, couldn't fit a 1/2in in there) If I can change the bearings myself that would be great, but either way I need to get the eccentric bolts loose so that I can replace them and have my alignment done properly. I also can't get the wheel speed sensor off, bolt comes out, but it's rusted to the spindle. I need something better than pb blaster and freeze off, but can't use heat next to the sensors (I only have propane anyway).