Thanks for the reply... Couple things I need help with.
None of the clips from the expo will snap into the corners I have and work. One of the ones from the taillights is close, but it doesn't turn the blinker on so it won't work. The front corner lights from the expo will work and twist in place, but it would use those tiny light bulbs and when I turn on my blinker it works, but flashes light I have a bulb out although they front and rear both work.
My other option is to use one of the bulb housings and bulbs from the expo"s taillights, as it fits but would just need a little silicone to seal it properly. My question with going this route is that there are three wires come from the expo's bulb, and only 2 on the car. I tested it and it works fine just using two of the three wires and also it doesn't flash like a bulb is bad. What is the third wire for? Could it be connected to the parking lights so Id have parking lights and blinkers?