No im saying the trans was ripped out before you put one in it was last I heard glad it went to another dsm guy. Yeah i know wesley he said he was looking at number 371 I think cause he asked if it was my old one. That is when I got on here to see if I could find out if its been posted and bam...

I owned the car for a good 3 years. I was the owner that tried to fix a lot of the issues and put it back to normal. new OEM knock sensor came with it. It did have all new clutch and trans bolts with dowel pin cause trans bolts kept coming lose from the owner before me not having them. Also like...

Thanks for the help yeah the car is at a friend house he looked at the plug instead of wiring and said it was four. When i went there I checked the wiring and it was 3 like it was suppose to be. Thanks for all the help.

Hi in the process of putting my 1991 gvr4 #602/2000 back on the road. I need a TPS but see there is three parts numbers. I know its a 4 wire one. Any help on this would be great. I do not have the TPS or I would pull the part number off it. Ive tried searching on here and did not pull anything.

Thanks for the response yeah everything is pointing towards the back sunroof drain being clogged. Going to pull some stuff and check tomorrow.

My car has been setting for about 6 months now outside. Its a sunroof car. I noticed last week after it rained the back driver side floor board is soaked.It seems to be around the start of the c piller all the way back to the floor board. I went today while it was raining and same thing the back...

Nice car.

Ive used felpro gasket kits on dsm's before no issue what so ever. I would only use felpro or oem.

Nice car man. I live in Bristol VA and have number 602/2000. Glad to see someone simi close.

Nice 15psi thanks for the pics. What is the size,width and offset on your sterns on your white car?

vr4junkie search for SC mustang wheels. They make them in 4 lug and 5 lug replica. Im really wanting to see those sterns on a GVR4 think it would look really good.

Stock will blow out sooner or later. The springs I would not trust sounds like cheap stuff.

Im from tennessee but im in Bristol. Grats on the pick up.

Very nice car. I like the wheels they look diffrent.

Yeah stock crank will hold like has been stated already.

Very nice GVR4.

nice.

Go to mitsu and order you a biss screws its like $1 and change after taxs maybe 2 bucks now if that. Then go to lowes and i belive it a number #5 o-ring.Here the vfaq click

very good guy to deal with.

Sold.

$120 OBO shipped.

Sorry for the dirty pics i didnt even wipe them off.

There pics of both foglights. I would say these are mint no cracks or peeling any where. The price is $150 OBO. Also may be intrested in some VR4 stuff my car needs. Let me know what you got.

I have a good set of usdm foglights off 602/2000. They are in good condition will have pics up tonight. Asking $150 shipped in united states.

How much for the 89 front grill shipped to 37620 ? Also can u send me the clips it pops into on the car?

click Here u go

People have tried to do a budget evo turbo setup and it has never been cost effective. Thats why you see no one running them. U can get a good direct bolt on charger for the price it cost to do everything to run evo chargers.

Well if its from transporting and the container. then that's why I've never seen it. We buy E85 and E98 by the drums still sealed. Hmm glad to know that though. I know some of you are asking why we don't use gas station pumps up here for E85. Long story short we had two cars get it out of pumps...

Brianawd is right i have seen 255Fp on E85 with no problem. This is ranging from duel setups and some tripple setup. Never seen E85 be the reason for a Fuel Pump going bad. The residue you speak of ive seen pics but have not seen it in person on any of the evo,DSM,Nissans or supra's that i have...

I havent been on slowboy for a while and was just there and seen this. this has the gears with it.click

You can get a OEM oil pump for around $220 ish through most respectable companies dsm companys.I think this was one of the best dealsclickclickJust note it does not include new gears those are more almost $90 to $100But like what has been said there has been hit or miss with most non...

schaeffer synthetic oil .

I Have drove three cars with ksport great stuff for the price. Dont listen to someone that doesnt have first hand experince. My frinds 06 RSX type S is a blast with his ksports. He has had them on there for 2 years with no problem. Im getting some for my GVR4.

Okay so when i got my GVR4 the front bumper support was off the car. Reason is because of a FMIC that's on the car. Found out while installing the JDM headlight that the bumper is ziptied on. So my question is there anyway to bolt the front bumper on or does anyone make a race bumper support for...

got a right side JDM headlight from him package very well and arrived as described. Thanks again.

Payment sent for headlight today.

Quote: E85 adds 30% more fuel to the exciting setup. If you cant adjust your fuel trims right now, than you need to look into a means of doing so before E85. aka. ecmlink. Buying an AFPR has nothing to do with it. You can run stock fp without any problems.Stock fuel pump? Just look into a used...

Quote: theres 1 about 15 miles or less from meand can i just fill up on e85 or do i need injectors and fpr im understanding the corrosive idea just wondering if i pass a station and fill up on e85 then would anybad happen (rich/lean mixture)You will need injectors,fuel pump,FPR and...

Agree the debait is always going to be there for some about corrosive parts. A local shop has not had any problem running E85 and E98 in stock fuel lines on DSM,EVO,MK4 supra or nissans.I have ran it in stock DSM with just FP and bigger injector and tune. It can be used for DD aslong as it is...

Quote: Having been where you are, the biggest question you need to ask yourself is what do you want from this car. If I had things to do over again, I definitely wouldn't stuck with a manifold that was more durable, and a smaller turbo, and concentrated more on things like cylinder head...

Quote: You should be able to do 11s on a 2G ported/Evo3 manifold and a 16G, or some basic TD06 20G, and the car should still be VERY streetable.Yeah but im only wanting to get one mainifold one time so i dont have to change it if i go to a bigger charger later on. Only like to buy stuff...

Thanks yeah i would like to see your mainifold you working on. Thanks for pics of the JMF mounted up in the engine bay. U all have been helpful. Kepp them coming.The reason im asking is im going for a big setup on my motor and just figuring out the option on the GVR4 mainifold. Cause like...

Well have been looking and looking and only thing i can find is JMF make a VR4 specific mainifold. I was wondering what all the 10/11 second people are running mainifold wise. I know bolt on Mitsu charger most are using FP mainifold. Was wondering what the big frame charger people are running...

This is a awsome addition for the people wanting to know who is running fastest in GVR4. I do agree gas type would be a great addition. Ive been looking for this kind of info and beyound dsmtimes.org to go off of that is it.

Most people now adays are just using the Felpro PermaTorque MLS Headgasket and L19 studs instead of oringing. This combo is proven to hold up very well for 700+HP. x2 on what garfield said. Eagle have come along way and i would use now if you wanted a H beam acourse. The I beams are gonna be...

Sorry to hear. Rebuild it and get it back up. Im gonna have to break my motor out around first of the year and rebuild it.

Sold to CTM.

Have you you checked for boost leaks? Also check for exhaust leaks around mainifold and turbo.

big thing is if it just the alt you will be able to start the car and hear run. Cause they are normally hidden problem owner not telling you. But i have bought a 1Ga car that was messed up for parts and all it needed was new plugs and wires and it fired right up with np drove it for a good while...

Quote: PM sent. Thanks Andrew.you have been PM'ed back. With all the info you requested and everything.To all the partys intrested in it i'm pretty sure CTM is getting it and we worked out a deal on it. If it falls through i will bump this up with info. But as of right now sale is...