Not very crispy actually lol. Will grab pics tomorrow. It's still in the car.

I do, it's sprayed black by po though, and I'd only sell as a set.

Yes

I have a harness for sale. Haven't seen one posted in a while. 200$ obo plus shipping and PayPal. Pm for pics/info

I have a mint harness but no plug, I have a pretty clean counsel

I have TONS of parts!Both cars are shells and will be crushed soon!No ac parts at all! No emgine parts at all!Lmk what you need and I'll see if I still have it!!Located in loveland co. Pm for pics.

I have one

I'm pretty sure the antenna is part of the motor also, but I have it all.

I have good rear calipers

I have one.

Oh Juan, what would we do without you. Awesome guy! Looking forward to more interactions.

I have 2 sets. Pm me if interested.

No sorry.

Coilovers were sold, and at least 1 has to roll for now lol.

Sent!

No ac parts :/ pm me to discuss shipping!

I have both. I am not sure if the lock works, I never used it in all the time I've owned the car :/ but it's there lol!

Thanks Craig!

I'm am parting out both my non running galants so I can buy another one.I have everything but, wiring harnesses and motors and trans etc. I will send pics of requested parts ASAP! Shipping is from Colorado, 80537554 is Nile black and 619 is kg, both cars have aws and only 554 has SOME...

Lol I've been lurking a while haha. I'm on here a lot I just don't log in or post much haha.

I have badges 619/1000 and 554/1000 for 150 shipped each! Lmk I have vouches lol

I have a grey door and the lense.

I have everything you need but shipping would be a lot.

I have one.

Bump, will to haggle to guys, im 700 into thing, and its only been turned on once! Throw some offers, or trades plus cash is possible.

Items are brand new, link has been booted up once. I had a bad isc motor and it cooked the isc driver in the exu. The ecu had been all rebuilt. And has been tested. Has new caps and drivers.Willing to sell for 600$ oboPlease email me with questions as I am not on the board often at...

used to have this exact set!! sweet wheels man, center caps do not exist btw...

See i have read that the mhi big 16g also has one. Im just trying to verify that i meed nothing but the line and fitting before install. I do NOT plan on running an inline filter either.

Ok guys, ill be putting the franken-turbo(ligit mhi big 16g chra and 7cm housing, not evo3) on soon and i need to know..1. If i run my feed line do i need a restrictor?2. If so what size.I have done a ton of reading and there is no definite answer...

As stated lmk guys. Working clock also please thanks!!!

Dibbs on guage pod guys.. Sorry to change the subject back to the fs post lol.

Quoting coyotes: Or just the MAF is fine. Condition of the MAFT setup unknown. Purchased from Paul (thedsmguy) on here in presumably working condition, but I never used it. I just want to run a 2g setup.Or I will sell outright for $100 shipped. Pics to come later.I have one. Sensor is a...

Quoting GSTwithPSI: ^Can't tell if serious...haha was thinking same thing lol.

As stated im lookkng for ideas on how to mount my 3 2 1/16" guages in 554! Thanks guys!

My driver side a pillar cove has broken tabs/clips from previous owner and his gauge setup. Im looking to fix thatand find some way to mount 3 gauges. Just seeing what my options are.

Afc was in the car when i got it. Wiring job was terrible so i went through it all and fixed and soldered it all correctly. My tuner says its rich enough to run e85 and piggy back it until i cant get my link setup.I currently looking for a link v3 for a decent amount of coin if anyone has one.

So my car is now doing something strange, at idle the afc is show between 200-300 hz. As soon as i touch the throttle it drops down to 3hz and the car wants to die.I am certain the wiring is correct, i checked the vfaq.Any idea's maybe?!? Thanks. Code:

First off, sorry for my spelling errors, stupid phone! I plan on going bigger turbo in the future. I just need the gsp turbo to make it till march lol.My heart is now set on te mtx-l from innovte. I have been reading for hours and it just seems like a MUCH better fit than the uego. Im am in...

From what ive read the lc1 is different from what im looking at. Im looking at the mtx-l which uses the same bosch sensor as aem, but it uses a digital signal istead of an analog signal. This is supposed to make the mtx-l the most accurate and fastest loging wideband available. I been reading...

See ive read the aem sensors last longer,BUT the both use the exact same bosch 4.2 lsu sensor, ao how can aem sensors last longer when they are the same?I am leaning much more twards the innovate now as it works better with ecmlink, which is a must have imo. Plus with logworks i can tune the...

I was incorrect. Never mind..

Again please dont flame my setup. The gsp turbo spools great and turns on HARD. At least for the 1500 miles the car went down for surgery. Was not purchased by my btw, ig was on the car when i got it. I have a authentice mhi e3 16g but it needs rebuilt. Will be getting that done also around mid...

Ok guys ive done a massive amount of work to 554 sense i got her and its almost time to start it!My mods now are: 255 wally 660cc injectors 272 cams E3 big 16g (gsp not oem) Custom front mount setup 3" turbo back 2g maf wired in.Will be tuned on a safc2 untill mid march when i can my...

Willing to part them? I just need the rear passenger but will buy both if need be...

Well turns out the new sensor was defective. I tore the stock sensor apart, cleaned all the rust off all the terminals and WALA! Idles like newBruno, i am well aware of what i need, no need to keep repeating yourself. Remeber that once there was a time when all the was was afc's and the...

Ok guys i changed my isc with a brand new one and now my car is acting super strange.Before replacement it would surge from 1k-1500 really slowly. Now with the new idle speed motor, it starts and immediatly revs to about 3k rpms for about 5 seconds and the drops to 1500 and sureges to 2000...

Will be replacing the isc tomorrow. I did a search and it has a md166262 ecu wich is the stock eprom from the car, so that nice. Passed a boost leak test even with the billion couplers and intercooler pipes. Will post updates as we go!

Oh ok, just figured the black would have been more... Well, black haha! I do love that gumetal color to it though!

Ok got a new knock sensor on the car, zero codes after the reset. Still has a idle surge but i played with the biss and its sort-of idles now. I do believe i need a isc.Now that i am work(lots of free time) here is some pics!!!Is this color the kensington grey? Obviously lots of work...

Also ran the part number on the ecu and its either the stock gvr4 or a 1g ecu so thats solved. The junkyard wrote the wrong year on the case!