I still have #59 but haven't driven the car in a long while. At least it is toasty in my garage.

Code 5545724248893093Expires February 19, 2017

Thanks a lot Steve. My wife thinks I am stupid for buying $40 in keychains. What does she know...they rock. Steve for president.

Payment sent for two 59/1000.

I would like 2 for 59/1000 (1992) if price is under $20/each shipped.

This is a sad day. If it wasn't for Nate and this car GVR4's would not have the interest they have today. Good luck Nate.

Nice car. Since you have a shop you should be capable of doing an auto swap.

Quoting gizmovr4: I met up with Nate at Island dragway last night. We had some pizza and talked for a little while- then Nate got serious. He helped both my friend and I run the fastest times we had run to date. Nate adjusted on our cars after each run. Here are the fastest results for my GVR4...

You can go with a 4 bolt rear with cups and still keep four lug hubs. You will lose steering pump unless you swap it out.

Great runs. I love seeing builds maximizing a small turbo vs just bolting up the largest turbo you can buy.

Quoting Diego: Where did you order?+1 eBay or some other shop?

The photos look great. Do you have any direct side shots to get a good look of the wheels.

Looking good. What grit did you use to sand the trim before painting?

Thumbs up, nice looking car.

I will be moving into a new house soon. The wife is getting her way with decorating the house. I want to deck out my new garage with Mitsubishi memorabilia (posters, flags). I saw a few things on ebay but nothing that great. Does anyone know where there is a good site for such items? Why...

Looking forward to new times, I hope this one hold up.

Is this the car when you bought it. click I love the car, wish I had the money to buy it. Good luck with the sale.

Good luck with the build. I hope you bought it cheap because you have a lot of work to do.

Here is a picture with the bumper on. With this core I had to cut 50% of the bumper support away for it to fit, but that is no different than any other FMIC on an GVR4.

. None of the above but good guesses.

click It is a spearco 2-221 assembly, the core is 2-115.I will get pictures of my car later.

What is his setup? Nice run. My best is on a small 16g and a low compression motor.

Here are some pictures. They are run like a DSM but you must use a slim fan and relocated battery. It is a tight fit. I used a DSM J pipe and built my own piping. You have to cut some of the headlight support to have room for piping to fit around the rad. If I can do it anyone can.

I have this intercooler on my vr4. I pulled it off my Talon and I paid too much for it and I would't get anything for it so I made it work. It isn't the shortest piping but it works. I have had this IC since '98 when DSM parts where a lot more costly.

I tried to get my wife to go junk yard hunting on my honeymoon in Jamaica. I didn't happen.

You are doing what I want to do but don't have time or funds to do. Great work so far and looking forward for updates. How much did it cost to rebuild the driveshaft?

No I didn't ran out of car play money.

Just contact them. The last time I was looking for a clutch I asked them since it wasn't on their sit at the time.

Oil pressure for sure. Unless you want to trust your engine to the idiot light.

Mavis, Are you trying to be as famous on here as you are on Tuners? BTW I never got your autograph

Wasting no time seeing what she can do. Very impressive and good work on the build.

I rebuilt mine and lasted about a year and a half. I finally just replaced it from Advance Auto and no problems. I would suggest just replacing it.

Looks great, I'm jealous.

Great work. Can't wait to see the finished product. You should be a POR salesman after coating everything in it.

Great work. I wish I had the time to do something like that to mine.

Did you get stock size or +1?

It depends on the width of the wheel. The most common is 225/50/16.

They will also be smaller outside diameter, about an inch.

Have you done the 5 bolt conversion? Just a FYI they are not available in 4X114.3 but I am sure you are aware of that.

I would run 15's but the problem is available tires that are about 24.5" tall. They are either that tall but narrow or you find wide tires but they are only about 22" tall. For that reason I would go with at least 16" wheels.

Quoting turbowop: Quoting boostedinaz: Mark, have you had a lot of good luck with buying those bumpers from Malaysia? They always seem to be normal prices and some are in decent condition, but buying anything out of country always plays on my mind.The one I just put on 503 was the first...

Quoting atc250r: I've rebuilt calipers and generally it isn't worth it IMHO. If you get a rebuilt set they'll be nice and clean so you can shoot a nice coat of paint on them before installing them. I rebuilt the Camaro calipers I got for my Camaro/Cobra brake kit but it was only to make 100%...

I didn't have to pull the rad only the PS pump and bracket. I didn't have factory IC so that gave me a little bit more room.

Harry what are your plans for the next project? I think it would be hard to build up any car to fill the shoes of #3. I hope this doesn't mean you won't be part of galantvr4.org anymore.

Thank you for that information. Very thorough and thought out testing of this fuel in real world conditions.

The speed bleeder is the same size as the brakes.

Quote: First one: (Maroon Car) It was 1992, and I was told I had to find a car, and so I started taking test drives in new cars at the time. I drove a few Sentra SE-Rs, I think I drove a Chevy Beretta GTZ, but I really wanted a Maxima. A friend and my gf at the time told me I needed to...

I hope you feel good about yourself selling a total POS to an unknowing buyer. Karma will get you.

I already had a 92 TSI AWD so I knew about them. Ran across an ad in the local Indiana Auto &RV. It was in the repairable section. It stated 92 galant, 5 speed, turbo $2850. This was back in 1999 when GVR4s were selling over $6000+. I knew it was a GVR4 so I called them up to get...

Quote: I had a couple real nice guys stop by to check out number3 and they seemed very pleased with what they saw.I don't know who wouldn't. In my opinion you are giving it a way for that price and I would be at your door in a heart beat if I had the money. It belongs in a museum and...