crazydriver81
Active member
Alright, I have decided which way to go with my 6G build - and most important, which hardware I am going to use.
I have a MD165808 ECU - which is currently at the electronics specialist to get caps replaced and a EPROM socket installed.
Along with this, I will use:
- Evo 8 injectors 560cc
- OE Evo III factory spec turbo (TD05H-16G) with 1.0bar wastegate actuator
- 8G Galant MAS "3G/type 482"
My problem now is, that I need somebody who can supply a specific EPROM chip for this setup. I have read a lot about the keydiver / DSMchips - but since he has closed down the business he cannot help anymore.
Who is able to help me out here? I'd like to have basically a chip which: compensates the injector size / corrects MAS values / 95 octane fuel maps / boost cut raised (basically only Stage3 options as per keydiver website).
Thanks for your help guys!
Stefan
I have a MD165808 ECU - which is currently at the electronics specialist to get caps replaced and a EPROM socket installed.
Along with this, I will use:
- Evo 8 injectors 560cc
- OE Evo III factory spec turbo (TD05H-16G) with 1.0bar wastegate actuator
- 8G Galant MAS "3G/type 482"
My problem now is, that I need somebody who can supply a specific EPROM chip for this setup. I have read a lot about the keydiver / DSMchips - but since he has closed down the business he cannot help anymore.
Who is able to help me out here? I'd like to have basically a chip which: compensates the injector size / corrects MAS values / 95 octane fuel maps / boost cut raised (basically only Stage3 options as per keydiver website).
Thanks for your help guys!
Stefan