GalantVR4.org The Mitsubishi Galant VR-4 Forum
Forum | Search | New user | Login | Who's Online | FAQ
Galant VR-4 Forums » Galant VR-4 » General VR4 Discussions » 504/2000 Restoration project and 2 other VR4. Why do I love these cars!!
Previous thread Next thread

504/2000 Restoration project and 2 other VR4. Why do I love these cars!!

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 904764 posted 06/05/10 09:09 PM     Remind Me!  Send Private Message   Edit Post      
Hello Guys,

This is my second galant vr4 build. This first one I built was a complete build for performance. This one will be built to keep mostly stock forum. Just a few upgrades for handling and looks. My plain is to replace alot of worn parts and clean it up to show room condition. I am going to be doing it in stages. My first stage is the rear suspension and undercarriage. I have already ordered alot of stock suspension parts from Mitsubishi. WL front and rear swaysbars. Here is some pics of what I have done so far.







Rear suspension. Lot of cleaning to do!!!






Stock exhaust is shot. So I will be replacing that.


I will be sanding/wire brushing and painting all the rear suspension and undercarriage. This is going to take some time.
I am also going to rebuild the drive shaft. Get it painted with all new parts. I found some ball bearings on the floor.
I am sure it came from the drive shaft.

Wish me luck!!! Having alot of fun so far

Check the link for video I made.
click


Edited by bobdole (02/13/19 11:32 AM)
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (92.25.61.108) | Report this post to a Moderator

Hertz Galant VR4.org Administrator
OneTitle to rule them all.
77/2000


 Galant VR-4 org Post #: 905090 posted 06/06/10 11:25 PM     Remind Me!  Send Private Message   Edit Post      
Wow a stock exhaust? Never seen one of those.


Ryan Hertz
Posts: 13500 | From: Chicago, IL | Member Since: 07/29/02 | IP: (75.22.224.236) | Report this post to a Moderator

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 905751 posted 06/08/10 06:59 PM     Remind Me!  Send Private Message   Edit Post      
More work today. I removed the driveshaft. Going to get it rebuild. Ordered the new parts from the dealer. I also started cleaning the fender area for rubberized under paint. I am thinking about dropping the gas tank to clean it.






Also I keep finding ball bearings on the floor. Any idea where they came from?


Great deal on BC coilovers. Hit me up.
www.b2autodesigns.com
Email: [email protected]
Youtube: click

Edited by bobdole (06/08/10 07:00 PM)
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (92.25.61.108) | Report this post to a Moderator

crankwalk
Unregistered


 Galant VR-4 org Post #: 905945 posted 06/09/10 10:24 AM     Remind Me!  Send Private Message   Edit Post      
Next thing in order should be to arrange the emblems on the rear to the correct position. Every time I see that it just looks like it was rear ended and a body shop just threw them on.
| | | IP: (171.161.160.10) | Report this post to a Moderator

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 906090 posted 06/09/10 07:47 PM     Remind Me!  Send Private Message   Edit Post      
yea I have already noticed the rear emblems I will fix this later.


Great deal on BC coilovers. Hit me up.
www.b2autodesigns.com
Email: [email protected]
Youtube: click
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (92.25.61.108) | Report this post to a Moderator

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 906730 posted 06/11/10 07:10 PM     Remind Me!  Send Private Message   Edit Post      
Got alot of new parts in from Mitsubishi today

Dropped the gas tank and cat today. The car is just about stripped in the rear. Going to clean it up over the weekend. Dropped alot of stuff to get powder coated black. Next week I will start treating the under carriage.








More pics to come.


Great deal on BC coilovers. Hit me up.
www.b2autodesigns.com
Email: [email protected]
Youtube: click

Edited by bobdole (06/11/10 07:12 PM)
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (78.144.208.48) | Report this post to a Moderator

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 907438 posted 06/14/10 08:46 PM     Remind Me!  Send Private Message   Edit Post      
Got alot done. Got some parts back from the sand blaster. Then I painted them over the weekend.






Cleaned with simple green:



Need a new sending unit:


More images to come:


Great deal on BC coilovers. Hit me up.
www.b2autodesigns.com
Email: [email protected]
Youtube: click
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (92.25.58.212) | Report this post to a Moderator

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 907458 posted 06/14/10 09:41 PM     Remind Me!  Send Private Message   Edit Post      
Also pick up this to clean up some nuts and bolts.






Great deal on BC coilovers. Hit me up.
www.b2autodesigns.com
Email: [email protected]
Youtube: click
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (92.25.58.212) | Report this post to a Moderator

iceman69510 Galant VR4.org Moderator
Turn Right Racing
855/2000


 Galant VR-4 org Post #: 907553 posted 06/15/10 09:15 AM     Remind Me!  Send Private Message   Edit Post      
Does that clean them without removing any remaining plating?


91 VR4 855 Nile Black
92 VR4 828 Belize Green-SOLD
91 VR4 115 Nile Black -SOLD
Posts: 10730 | From: Michigan | Member Since: 03/05/01 | IP: (12.1.210.228) | Report this post to a Moderator

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 907638 posted 06/15/10 01:58 PM     Remind Me!  Send Private Message   Edit Post      
Found this place to rebuild my fuel sending unit. I sent him pictures. He said he could rebuild it no problem. I will post pictures when I get it back!!

click


Great deal on BC coilovers. Hit me up.
www.b2autodesigns.com
Email: [email protected]
Youtube: click
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (92.25.58.212) | Report this post to a Moderator

fuel
"Just to be pedantic!"


 Galant VR-4 org Post #: 907700 posted 06/15/10 04:58 PM     Remind Me!  Send Private Message   Edit Post      
wow very nice! I always love a good restoration!


'91 E39A Galant VR-4 Evolution | '80 A164A Eterna GSR Turbo

-- Visit my JDM Galant VR-4 info & specifications site here! --
Posts: 2142 | From: Toronto, ON, Canada | Member Since: 02/23/09 | IP: (122.58.186.10) | Report this post to a Moderator

G Galant VR4.org Moderator
JDM Unit
486/1000


 Galant VR-4 org Post #: 907767 posted 06/15/10 06:44 PM     Remind Me!  Send Private Message   Edit Post      
Looks nice! Any rust inside the tank?


www.japanesenostalgiccar.com
www.nostalgic.co.jp
Posts: 8896 | From: zompton | Member Since: 02/24/04 | IP: (98.144.66.243) | Report this post to a Moderator

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 907796 posted 06/15/10 07:42 PM     Remind Me!  Send Private Message   Edit Post      
The inside of the tank looked brand new. I was surprised.


Great deal on BC coilovers. Hit me up.
www.b2autodesigns.com
Email: [email protected]
Youtube: click
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (92.25.58.212) | Report this post to a Moderator

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 908544 posted 06/18/10 12:11 PM     Remind Me!  Send Private Message   Edit Post      
Yesterday I worked more on the car. Removed the rear bumper to find out my bumper support is shot. So I am fixing that. I also painted/sealed the underside. Just waiting on that to dry so I can spray the rubberized undercoating on. I already did the fenders they turned out great. My new rotors and pads showed up. The drive shaft in finished got to go pick up. Got is sand plasted and painted also with all new parts. Also Mitsubishi guy dropped of new parts .












Great deal on BC coilovers. Hit me up.
www.b2autodesigns.com
Email: [email protected]
Youtube: click
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (92.26.136.17) | Report this post to a Moderator

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 908994 posted 06/20/10 06:12 PM     Remind Me!  Send Private Message   Edit Post      
Finished painting. Just got to but everything back together. Also got my new rotors, pads and brake lines in.







Great deal on BC coilovers. Hit me up.
www.b2autodesigns.com
Email: [email protected]
Youtube: click
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (92.26.136.17) | Report this post to a Moderator

381gvr4
used by hotroders
381/2000



 Galant VR-4 org Post #: 909010 posted 06/20/10 08:14 PM     Remind Me!  Send Private Message   Edit Post      
Looks awesome!!! The condition based on the pics look to be outstanding!!! The rear subframe looked pretty good for its age and looks sick now!!! Was this a original FL car???

Welcome back Mr. Dole!!!


Sent from my iPhone

2007 Shelby GT
2002 RAM 1500 Quad Cab DD
1968 Camaro 427BB

2006 GSX-R 750 SOLD 3/19/12
1991 GVR4 #381 SOLD 3/27/12

Edited by 381gvr4 (06/20/10 08:18 PM)
Posts: 568 | From: Wakefield, RI/Meriden, CT | Member Since: 11/05/07 | IP: (166.137.139.244) | Report this post to a Moderator

Jordangvr4
Member +


 Galant VR-4 org Post #: 909036 posted 06/20/10 09:23 PM     Remind Me!  Send Private Message   Edit Post      
Awesome job!


1991 Gvr-4 Amg
1991 Gvr-4 Jdm rhd
Posts: 319 | From: Nassau,NYC. | Member Since: 11/02/08 | IP: (68.195.136.208) | Report this post to a Moderator

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 909055 posted 06/20/10 10:55 PM     Remind Me!  Send Private Message   Edit Post      
I bought the car from NY area. I am the third owner. The guy I bought it from had it for 9 years. There is some rust but mostly surface rust. Once I finish the rear area I will start on front of the car. It is alot of work so far but I am having fun doing it


Great deal on BC coilovers. Hit me up.
www.b2autodesigns.com
Email: [email protected]
Youtube: click
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (92.26.136.17) | Report this post to a Moderator

TurboTrader
Member


 Galant VR-4 org Post #: 909092 posted 06/21/10 05:23 AM     Remind Me!  Send Private Message   Edit Post      
Quoting 381gvr4:

Looks awesome!!! The condition based on the pics look to be outstanding!!! The rear subframe looked pretty good for its age and looks sick now!!! Was this a original FL car???

Welcome back Mr. Dole!!!



It does look good, especially for a New York car. Nice.
Posts: 161 | From: Pemberton, NJ | Member Since: 01/30/09 | IP: (98.224.40.199) | Report this post to a Moderator

evo8ya
Member +
807/2000


 Galant VR-4 org Post #: 909405 posted 06/22/10 07:28 AM     Remind Me!  Send Private Message   Edit Post      
That is lookin great. Awesome job!


Black Sand Pearl 05 Tacoma TRD Off Road 4X4 - DD
Nile Black 91 807/2000 Sold
Tarmac Black 05 Evo GSR Sold
Apex Silver 03 Evo GSR Sold
Summit White 92 780/1000 Sold
Nile Black 91 259/2000 Sold
Posts: 351 | From: PA/MD | Member Since: 07/07/06 | IP: (174.60.61.111) | Report this post to a Moderator

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 909483 posted 06/22/10 12:50 PM     Remind Me!  Send Private Message   Edit Post      
Just picked up the drive shaft and it looks great. Can't wait to get it all but back together. Just waiting on rear steering rack, swaybars, Coilovers, Gas tank and sending unit. Oh I have to still paint the rear crossmember.





Thanks


Great deal on BC coilovers. Hit me up.
www.b2autodesigns.com
Email: [email protected]
Youtube: click
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (92.26.136.17) | Report this post to a Moderator

turboser1
Unregistered


 Galant VR-4 org Post #: 910173 posted 06/24/10 11:40 AM     Remind Me!  Send Private Message   Edit Post      
Quoting evo8ya:

That is lookin great. Awesome job!


My thoughts exactly!
| | | IP: (74.96.179.180) | Report this post to a Moderator

TWEAKD4
Member ++
59/1000


 Galant VR-4 org Post #: 910296 posted 06/24/10 07:27 PM     Remind Me!  Send Private Message   Edit Post      
You are doing what I want to do but don't have time or funds to do. Great work so far and looking forward for updates. How much did it cost to rebuild the driveshaft?


Craig
12.926/106.34mph best ET Race/pump mix
13.206/109.21mph best trap 93/E85 and meth on slipping clutch
Posts: 605 | From: Fort Wayne, IN | Member Since: 03/24/02 | IP: (71.97.128.51) | Report this post to a Moderator

bobdole
Old member with new to me VR4 and starting over. Respect your elders kids
504/2000


 Galant VR-4 org Post #: 910331 posted 06/24/10 09:36 PM     Remind Me!  Send Private Message   Edit Post      
Cost about $400.00 for the full rebuild of the driveshaft. Had it plasted and painted. I finished welding the rear bumper support today. Dropped off to get sand plasted. Then I will repaint and install the rear bumber back. Repainted the cross member today. Turned out great






Edited by bobdole (06/25/10 11:40 AM)
Posts: 779 | From: tampa | Member Since: 08/23/07 | IP: (92.25.131.174) | Report this post to a Moderator

curtis Galant VR4.org Moderator
Space Blanket from NASA plumbed into the attic
475/1000


 Galant VR-4 org Post #: 910391 posted 06/25/10 01:05 AM     Remind Me!  Send Private Message   Edit Post   
Bob you've not been around but I did the design work and John aka Boostx did the leg work and in the end we came up with new bushings for the subframe as well as the mustache brace. PM John and see if he has any or yell at Garfield and see if he has any in stock. John may still be away but see if one of the two can get you a set before everything goes in.


Wish mine was in that condition right now. Still have to roll it out and do all that to mine plus cut out the trunk for the fuel safe.

Keep it up mods look like there going right along.


92 GVR4 0475/1000
Greenhouse Effect Green
Exceeds Mechanical Limits
"Put the dawg to work.
Ass, Gas or Milkbones. Nobody rides for free" Jon AKA Toybreaker
Posts: 11892 | From: Clarksville TN | Member Since: 05/04/03 | IP: (208.95.177.176) | Report this post to a Moderator


Pages: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12 | 13 | 14 | 15 | 16 | 17 | 18 | 19 | 20>>
Previous thread Next thread

Extra information
0 registered and 48 anonymous users are browsing this forum.

Galant VR4.org Moderator:  curtis, steve, atc250r, jcgalntvr4-244, cheekychimp, jepherz, Rausch, toybreaker, iceman69510, pot, FlyingEagle 

Print Thread

Forum Permissions
      You cannot start new topics
      You cannot reply to topics
      HTML is disabled
      UBBCode is enabled

Rating: ****
Thread views: 130323

Rate this thread


News & Events: News | Events
Galant VR-4: Newbies | General VR4 Discussions | Technical Discussions | How To and Info Archive
Marketplace: Parts For Sale | Cars For Sale | Good Guys | Bad Guys
Community: Members' Showcase

Contact Us | Privacy statement GalantVR-4.org

Generated in 0.216 seconds in which 0.136 seconds were spent on a total of 14 queries. Turbo powered.

Hertz's Galant VR-4 Page