Racah15
Well-known member
Ok, life took a 180*, lost my job, and I need to go to school and stop having these pipe dreams that will never get realized. Time to part out my 2g. And some stuff that for my Galant.
#1: 2g Head with smoothed out intake ports, stock valves, Dual supertech valvesprings with Viton valve seals and titanium retainers, 0 mile Kelford 272/272 Camshafts, and 3g Lifters. $1000obo. Head has been resurfaced, inspected, cleaned and re-done. ( I think 30 ra) and ready to go! Or can split up
Head $200
3g Lifters $100
Kelford Cams $450
Supertech Duals $250 (no valveseals)
Must have a buyer for everything before split.
90OFH. Can include lines and cooler if needed, will only add shipping costs. $100?
Tial, Alpha Q, No longer made or available. Minor surface imperfection around the upper lip. $150
Omni 4bar DSM style MAP sensor with JMF SMIM adapter. Paid $108 for the MAP (Before link sold it as a pack) and $30 for the adapter. $90? It looks dirty in the pic, but it was just the flash, it's brand new.
PTE6157, Rebuilt at PTE and has 0 miles. rated for 610hp. 4" ported housing. Will include DNP manifold and MAP o2 housing and RARE non-water piped MV-S. This is from the first batch that didn't include those pesky water ports that always leak. $1000, for
BAER Big brakes painted Rally Red. Comes with brackets, bolts, rotors, pads, calipers and such. $400?
-Candy Red Valvecover with 2x -10AN Fittings AND BAFFLES! One spark plug bolt broken, rest are fine, no cracks. Comes with custom Red/Black AN fittings (You won't find these for sale), and Cool billet oil cap that says Powered by 4g63 in Black and Red.
$240.
-JMF 7bolt SMIM. Idle time. Includes BLACK IAC, and 3000GT Throttle body. Can include custom Coil bracket and a set of coils if you want. I used Sparktech COP, so no need for the bracket/coil. IF I can find it. Which I probably can, just haven't looked hard enough.
$400
#1: 2g Head with smoothed out intake ports, stock valves, Dual supertech valvesprings with Viton valve seals and titanium retainers, 0 mile Kelford 272/272 Camshafts, and 3g Lifters. $1000obo. Head has been resurfaced, inspected, cleaned and re-done. ( I think 30 ra) and ready to go! Or can split up
Head $200
3g Lifters $100
Kelford Cams $450
Supertech Duals $250 (no valveseals)
Must have a buyer for everything before split.
90OFH. Can include lines and cooler if needed, will only add shipping costs. $100?
Tial, Alpha Q, No longer made or available. Minor surface imperfection around the upper lip. $150
Omni 4bar DSM style MAP sensor with JMF SMIM adapter. Paid $108 for the MAP (Before link sold it as a pack) and $30 for the adapter. $90? It looks dirty in the pic, but it was just the flash, it's brand new.
PTE6157, Rebuilt at PTE and has 0 miles. rated for 610hp. 4" ported housing. Will include DNP manifold and MAP o2 housing and RARE non-water piped MV-S. This is from the first batch that didn't include those pesky water ports that always leak. $1000, for
BAER Big brakes painted Rally Red. Comes with brackets, bolts, rotors, pads, calipers and such. $400?
-Candy Red Valvecover with 2x -10AN Fittings AND BAFFLES! One spark plug bolt broken, rest are fine, no cracks. Comes with custom Red/Black AN fittings (You won't find these for sale), and Cool billet oil cap that says Powered by 4g63 in Black and Red.
$240.
-JMF 7bolt SMIM. Idle time. Includes BLACK IAC, and 3000GT Throttle body. Can include custom Coil bracket and a set of coils if you want. I used Sparktech COP, so no need for the bracket/coil. IF I can find it. Which I probably can, just haven't looked hard enough.
$400
