Yes. I picked it up last night.

Email sent

I'm selling a used set of 4 PTE 700cc injectors, part number: 17118314I just sent these to FIC to be flow tested, cleaned and to confirm their operation. I received them back today. They did not need cleaning and they all flowed around 700cc as you can see in the results of the flow test...

Quoting Kibby: I didnt completely remove mine just got it out of the way to get to the bolt. I already had my dash out. Theres a writeup on the forum on how to get to the bolt.Any idea where this write up is? I'm searching for it now. I need to get to that bolt.

Near Indian Head in Charles Co.

Thanks. I don't think he wanted to ship it to me. I asked for a price last week and he said it wouldn't be worth it so Im looking for another one.

I'm looking for a stock vr4 muffler in the MD/DC/VA area. Let me know if you've got one to part with and what you're looking to get. Thanks.

Pm sent.

Come on, there is only one real Ft Meade and thats the one in MD with DISA and NSA.... bump

There's a line buddy! I got cash ready to be in his hand.

Can you take a picture of the damage to the driver side door and put it up or pm me with it?

If he has the starter I'd probably put it in myself to hear it run. That video was posted 5 months ago and no telling when it was recorded. I know how many things I've gone through in 5 months. I have the cash but the owner hasn't responded to my messages.

I just read your craigslist ad completely. I have cash in hand but have a couple questions and can't call right now so I'm hoping you can respond to this. From what you wrote it just needs a starter and clutch adjustment and you wrote it will come with everything needed except the labor. I don't...

the correct link: clickI'd get it but not for that price. If you can't sell and lower the price let me know. I'm looking for a 1g and your setup is almost like mine was.What is needed to finish the car?edit: Guess the price is good. I didn't see the aem until you posted pics. I'm...

I was going to buy this car but my brother couldn't wait for me to get settled in my new house so he sold it. Wish I could've got it. Good luck with the sale. Did you change out the fmic?

Are you talking about the 5 passenger Expo's? I think they did come awd. If short Expo didn't the Eagle Summit wagon did. Check it out. I think are a lot more of the short awd's around than the 7 passenger, not swapped though.click

And it is the event Shepherd set his record. I am going to be there like I am every year

Bump. Hope this house works out soon so I'll know what I have left in cash!

This car is the one used to run the #10 spot on dsmtimes for galant vr-4. It used to be top 5 if I remember right when it was done all those years ago. Bump

Quoting hamtaroislife: Another Person on here thats a BLUFF'N MC'MUFFIN Gezz Offer dude to buy it off him for about 3600 he said no then asked for 3800 he said no then said I will buy it for $3,900 the price he wants. But he said he had a cracked windshield and I just wanted a picture to see...

HA! The 2nd picture Geoff posted is one of first gvr4 pictures I ever saw that made me want one and I never knew it was Tom's. Great car, whoever buys it should buy everything Tom is selling in the parts section. It's all there.

I bought a brand new 3" cat from him for $60 shipped. It came fast and was packed pretty good, might be a good idea to tape the ends next time to keep the packing from filling up the cat but it was nothing. thanks again!

I searched the name and didn't find one so this should be a first.I bought a 3" FP Vband o2 and downpipe from him. He went out of his way to set up another paypal account to save me money on paypal fees. The items were packaged good and would've took a lesser indivual an hour to get out of the...

Bought a evo mas with filter adapter from him. Packaged good and arrived fast. Also came with extras: a stock evo intake and a HKS coupler. Thanks!

you're friends suck if they charge you $300-500 for an inspection, $150 for an inspection is what Ive got them for, $200-250 is what I've heard is regular but then again it says you are in rockville so they jack that up. emissions will just give you a waiver. MD is the best. VA is easy but you...

He still has the car and it is still for sale.

the car is still for sale

don't think that was him at the church. must've been more than one.

Had some wrong info to start with. a c51ph works with a complete 90 setup.to make a c51ph jdm transmission work, you will need the following parts90 DSM shifter cables 90 DSM shifter assembly 90 DSM cable bracket that bolts to the transmissionORChange the shifter arms on the...

I have a 90 Talon tsi awd project car and need help. I can't find this anywhere. I've found a lot of sites that just say something about a c51ph transmission being a JDM or AUS gvr4 trans.What I need to know is what is needed to make this work? I've got complete 90 and 91+ shifter assemblies...

Great guy, we traded cars today and swapped the motor/trans over to my new one and some other parts. He's always ready to lend a hand.

i think they are going for the new mitsu look. like the evo concept and the ralliart eclipse concepts.

MD/DC/VA area is getting crowded!

I'm on the map.

right rear wheel bearings fixed. I let the mechanics at my shop do it. Now that i've seen it done, I didn't look to bad. If I ever need it done again, i'll do it myself. the 2 wheel bearings(inner/outer) were $35 using the shops discount and labor was 1.5 hours but i got a 15% discount on that...

took it to work today and got it on the lift, its the wheel bearing in the right rear. We ordered them today and they will be there tomorrow. 1.5 hours labor for them to get put in, i should get a discount on labor though.withing the last few day, new rear brakes and test drive... grinding...

is it safe to drive with messed up wheel bearings? I work at goodyear and the mechanics might be able to tackle this. I know there is a press against the wall, not sure if it is the right one for the job.i work about 5 miles from my house. the noise is pretty bad. bad enough that it threw...

no, i took the wheel back off and made sure the dust shield wasn't hitting.

rear brakes fixed, problem not solved. My right rear rotor was very bad and the pad was digging into it but it wasn't the cause of the noise coming from the right rear of the car.***SAME PROBLEM***Needs a different solution since its not the brakes. the noise sounds like a bad...

what about the bracket?

I was changing rotors and pads today and noticed my right rear caliper slider was bent. It causes the inside pad to wear at an angle and dig into the rotor and cause a bad grinding noise. I don't have any spare calipers or brackets so I was just going to bolt it back together until I could fix...

Quote: Quote: May i suggest a stock "Extrude Honed" manifold. Does wonders.I'm going to take that one step further, a cyclone extrude honed with Keydiver's chip should get you everything you need & nothing you don't.I remember talking to someone with an extrude honed cyclone manifold...

Great guy! Has helped me out again. I broke my transmission a while ago and the galant is my only means of transportation next to walking. He went out of his way to help me. He drove by my house to pick up the transmission and then fixed it for free, which included a new shift fork and some...

Quote: He is a good guy I have known him personally for 21 years.Almost 22 years on 11-11

Repost:https://www.galantvr4.org/ubb/ultimatebb.php?ubb=get_topic;f=14;t=000146#000000

He has already hooked me up in the past with 2 eproms, a socket and new caps but my ECU was damaged.Since I'm in Florida, my brother and I went by to hang out and he fixed my broken ECU while we were there. Great guy, nice car! I'm only going to have to bother him a couple more times...

I should've posted this when I bought it but I purchased a 4 bolt rear and axles from him a few weeks ago and the transaction went smoothly.Posting now gives me an opportunity to say that he also helped me diagnose clutch problems after I installed my new clutch/flywheel and he drove out of...

sorry, i meant i rounded up to the nearest hundreth

i rounded up

I read somewhere that if it is LSD, there will be a warning label on it. I think there should also be a ratio # somewhere on the differential case. I'm not sure but I think it is supposed to say 3.55 if it is a 4 bolt. Might want to double check, thats from my memory which is weak.