Do you plan on making more of these? I want one! A rogue grapefruit sized stone took out one of my trans's. I think this will sell before I'll be ready to buy it. Do u got a pic with the car on the ground? I wanna see how far below the bumper it hangs.

Found my alt bearings making noise and ordered a new one today. I feel like this was hurting my idle stability, bogging the engine with the headlights/fan/ect... and maybe a stretch but a little phantom knock when tapping the gas in neutral.Is anyone using ecmtuning boots control solenoid...

I have a 1g koyo in mine I fab'd up lower spacers to raise it flush with Rad support and made new upper brackets out of s.s. and put the rad cap thermostat housing on it.

Who is the tuner? Do they have awd dyno I wanna get it close fix all my little issues and have a pro perfect it.

I got motivated and wired in the W.B., my harness did not have a pin for egr temp so I depinned the next plug over and took the ac compressor clutch output pin and soldered it to the wire coming from the WB and placed it in the egr temp location. I set my direct access thresholds high n did...

I have the innovate lc1 I already tig'd the bung in the downpipe I just need a day off (going on 10 days strait now working) to wire it up and into the ecu I was thinking egrtemp input. Once its installed at what point do u start tweaking things? I was thinking airflow correction? How do I know...

Hi everyone here's the deal I have done a ton of work to #610/2000 and I'm a little intimidated by tuning. I am running 660 injectors 264 cams in a ported head full ets frontmount with 3inch gm maf evo 3 manifold and a 16g. Everything is hooked up n the car runs and drives pretty well, I'm...

What is the stock bolt pattern I have a brand new set of blizzak ws70's 205/65r15 and I think I can use a stock accord steel wheel I just can't find the bolt pattern I'm just being lazy really. Do u happen to know what it is? Thanks

I got brackets for a 91, 92 vr4 trans and the 90 talon one so I'll prob be good. Thanks

Had a similar problem mine was the pin in the plug to the Ecuador was bent back not making good contact. Back probeing also showed good results due to pushing on the pin. I used a small pick to bend it back and good to go. I have 1glink plam logger also love the thing. Good luck if u need I can...

So my trans bell housing has a solid crack pretty much junk. I have a 90 talon tsi trans and t case that are leftovers. Are there any differences from the 91 gvr4? Can I just drop em in fill em up and roll? Thanks

Smooth transaction fast shipping could have packed the intercooler better nothing 1 coat of paint n a tiny flathead couldent fix so we shall blame the postmen. I would be happy to deal again!

kinda new to the palm logger stuff but i got a snapon modis with the aldl12 adaptor and couldent connect it ended up bein pin 10 had no signal from i wanna say pin 2 on ecu it was a loose pin fixed that and connects and actuates sensors fine now. found the pinouts on ecmlink website, of u need a...

kinda having the same driveability issue and the conclusion ive come to with mine is the bogging is the ecu pulling timeing due to knock, im still runnin the oe intercooler everyone i described my issue to has told me thats my problem, i'm ordering up the ETS kit tomorrow so hopefully early next...

kinda new to vr4's so i'm quickly learning all the little fun things about these cars; like how the tiny oem intercooler heatsoaks superfast and makes my car run like garbage under boost. so tomorrow i'm ordering up a big front mount 3 inch gm maf and a maft, i have read the scanned copy of the...

i very recently has one of the lines from left to rt on the rack rust out a pin hole, i feel your pain i took the rack out of the car and used "KROIL" made by Kano Labs on the lines its magic stuff u let it soak in for a lil while and it will break anything free, i used it on an egr tube at work...

are the rear camber bushings still availible? if so i want them pm me your info

fog lights?

i think Im gonna take a ride down to work n grab my o-scope and a can of maf cleaner in a little bit and see if i can see a dif. b4 and after cleaning, i already cleaned the k/n filter didn't add oil as maf is so close to filter. plugs n wires are fresh. wish i could com. with my scanner n see...

hey everyone, im new to forums, and gvr4's. I recently put one on the road after sitting for a long time and have some random ?'s hopefully someone can help. haven't had time to really check anything yet 1. what is stock boost? im holding at 8-10 psi, i assume the selonid in the vac lines...