Any chance you could post a picture with both side of the connector visible so we can see all the wire colors. Trying to figure out how you wired it up.

Got a set of cams from Nate, they came extremely well packaged, and he was willing to work with me on shipping. Great guy, the fact that he has 3 pages in the "good guys" section tells you all you need to know.

swapped the temp sensor with a known working one and nothing changed. I think I'm going to try to send the ECU to ecmlink and see if everything is working. Thanks for your input guys, and if you have any other idea's let me know.

been having some issues with the galant recently, started off running rough. few days later I can crank and crank and the engine won't even fire. I'm getting air, fuel and spark, and compression is good. pulled the computer out and found this, thoughts?

Looking for a used Holset HX35 turbocharger, I know someone has one laying around. I don't care if its the 7 or 8 blade compressor, just needs to have the factory turbine housing and wastegate. Thanks. note: pics are always nice.

No none of the VR4's came with a factory 5 lug, you can swap it from a most dsm's. And from what I've seen and heard its not that difficult, but I personally have not done it, Maybe one of you guys that have could chime in with the particulars.

Had the same problem not long ago on 898. Installed a new southbend clutch disc and PP, replaced the flywheel surface on my spec flywheel and could not get the car into gear while running just like your problem. I ended up pulling the trans back out and comparing the flywheel step of the...

So this past year I installed a LED light bar on my VR4, (don't worry I didn't just screw it to front bumper) seeing how most of my driving is done in the dark on back roads by myself. I have found the light bar to be a huge benefit. But like anything once we have something we want more of it:)...

price drop to $350, or make me a offer. This is still collecting dust.

What throttle body is this flanged for?

Got a rear sway bar from Charles and was very impressed with how he deals with his customers. He gave me what I feel was a very fair price and was very prompt on shipping it to me. He has my future business. Thanks Charles.

Finally had about enough of the automatic seat belts, Looking for a complete conversion, seat belts, trim etc... let me know what you have and we'll work something out. I'll take care of shipping. Thanks

Well, in all honesty how much would you ask?

Clutch has approximately 32 miles on it and about 20 engagements, I just couldn't get it to work. Here is a link to the thread of what I was dealing with. click I decided to just go with what I was using before. According to South Bend there is nothing wrong with it, I looked it over and can't...

Checked the pedal by pushing it to the floor and then trying to pull it up with my foot, no slop at all. And Mark slave cylinder is 3/4 bore.