sublimesnfu
Well-known member
Hello, I've been away from the boards for a while - but the snow is melting and soon I will be able to start back on finishing up my VR4. Thanks to Team DuckTape for all the help last summer - we got the motor back in the car running with no check engine lights :-D mainly with your help bro. But the throttle body was sticking open above 4k and the snow began to fall so the rest of the project was put on hold. The throttle body won't close when revved past 4k unless you push on it ever so lightly with your finger. The throttle body return spring was taken off by accident/stupidity and we've rewound it six ways from Sunday to no avail, the only thing I did to the throttle body was clean it up with some carb cleaner when it was off. Everyone I've talked locally has no idea and I am thinking I may just buy a new/used throttle body to put in the next couple of weeks once it is warm again but if anyone has any advice/suggestions I would appreciate it as after this problem the only thing left hopefully is tuning my MAS Translator so my BOV doesn't cause problems.
Thanks
Alan
Thanks
Alan